Clark Ronald Lewis Daniel Thomas David

I have close to 1k rds through mine without a hiccup. I did swap out for the GG flat-faced trigger and short reset kit. Just couldn’t get much leverage with the factory curve trigger but maybe I needed more training. Mine is the V3 so it has the safety as well, so I could carry like a 1911/2011 safely if I chose too. Would like to get a P2000 with that crazy 3 million rd torture test.

Lewis Jennifer Martin John Walker Susan

This pistol can be bought now for $670 with free shipping, always wait at least 2 years after they release a new pistol.

Any updates?

I just watched this video because I’ve been considering this exact gun in 9mm. So whatever happened with your pistol? Did Springfield resolve the issues? Do you still have it and shoot it?

I need a P30L

You have to run 124gr NATO in these foe like 500 rounds. The weaker target ammo will not cycle properly until it's broken in.

It's a 1911. It's a century old design. It's like a Harley-Davidson. EVERY internal part is both replaceable and upgradable. And like a Harley, knowing how to troubleshoot them is part of ownership.

I love the USP way more. It's a beast tram

You can convert all the HK P series and USP guns to LEM. I find the sig p226/229 requires a slight turn to access the de-cocker, however it is very quiet. The HKs are loud when using the feature.

Try dry lube. Various makers have dry lube. Remington is a good one.

I spent a ridiculous amount on a Pro light rail on gunbroker. The damn thing is already at Springfield for warranty work. Amd for whatever reason the bushing could be removed by hand. Pros are suppose to be tight. They definitely aren't $3k guns.

The p30 is a thing of beauty

I've had one of these in .45 for over a year. At first it was jamming when trying to feed a round but after it got broken in it's been running flawlessly. The extractor was a little too tight most likely

I think the small amount of play between the barrel bushing and the slide is normal. My Tisas has very visible space there and it still shoots very accurately. But if Springfield can fix it then definitely go for it. Any update on this? I have the Operator and am very happy with it so far. I was thinking about the Garrison next in .45.

I have this gun 500 rounds in and it’s like butter and very accurate out of the box for me. Butter baby I’m very satisfied with mine

Why they show me this shit after I buy one 😂wtf is KZbin on !

I had a garrison just like that one in 9mm. Lots of times, it would not chamber a round. Had to send it back to Springfield. I was not impressed. Good video 👍

I have the Garrison in .45 cap.it has been flawless. I had a loaded target in stainless 9mm and it just would not stay running. I also have a Rock Island 9mm tac ultra and it just flat out hauls ass. Have my eye on a colt competition pistol in 9mm now, so we will see how it goes.i have a dozen 1911’s two of which are 9mm . The Springfield didn’t run the rock island does. Hoping for better luck with the colt when it comes. Great video , thanks for sharing.

Cant get the gun to work ?,can't even complain!

Looks like you are running the pistol dry especially on the disconnector. Run your 1911 wet.

I have a blued .45 Garrison with a couple thousand rounds through it with no issues ! 1911’s in 9mm seem to have problems from most mfg. imo . Seems the slide to frame fit is too tight and might need lapping a bit to smooth it out . SA will take care of it I wouldn’t panic just yet 😂

I got a Garrison from a person and it did the same thing! The slide locked up and wouldn’t move. The gun looked new but the guy came back and took the gun but haven’t herd anything else from him! He’s avoiding me now so we’ll see what happens! I thought I was getting a decent gun but this is the second one now with the same problem. Good luck with however you make out,I definitely wouldn’t use it for my everyday carry. I’m thinking it might be the barrel loop? They should give you a new gun!!!

wheres the update its been 2 months

You got a bad one it happens with all the brands. Give them a chance and let them fix it before you pass judgment. You can look up videos on every single gun model ever made and find problems.

Send to Springfield maybe they fix it.

👍👍👍🇨🇷😁

1911 meant for 45

1911 don't have buffer springs, I think you meant recoil springs. Not trying to nitpick but there's a lot of people out there doing reviews right now that can't even get the terminology correct. Not saying that's you and you probably just misspoke but I thought I'd let you know in any event

I like your video and the clear perspective you have on the gun. Writing this right now without finishing the full video I have to say this: With your history and experience with a 1911, what happens when you rack the slide at 7:00 into your video, it should've been plainly obvious what was the problem with your Garrison. As is mentioned below, the disconnector "grabs" the slide and won't let it move forward. The extractor may be improperly tensioned as well - none of which are your fault. My Garrison will do the same, but in a much less violent manner as yours does - it definitely needs some work. You can field strip a 1911 in seconds, so you know what does what. These all-steel guns are NOT the same as the polymer/plastic guns that dilute the market now. They may be accurate and reliable, but they do not become a "Tonto" to a "Lone Ranger", if I may write bluntly. All-steel guns require lots of rounds through them, some fitting, lots of oil, care, and some TLC that only you can describe with your gun. I know that a Garrison is almost $1000 but when you get it humming and have some fun changing a few parts, it becomes even more "yours", if you understand my meaning. But this gun is the most vocal, demanding, silky, and bell-ringing gun I have ever owned. I can't speak to it's accuracy, because I just changed the 3-dot sights to fiber-optic/Tritium sights and don't even know what they look like. Anyway, like other viewers of your video, I look forward to a follow-up post-fixes, to see if your Garrison eventually becomes the M1A1 "basic" 1911 in your armory that has fought in so many wars. Peace!

Try a Tisas. You won’t be disappointed.

First mistake was getting a 1911 in 9mm but ur problem is the extractor !

I have had Springfield Armory guns throughout the years and bought one of these because I wanted a 9mm 1911. I put about 200 rounds through it. Took back to the store and traded for another gun. My other Springfields are .45's. Their target gun and a TRP. Sweet pistols. With the TRP, literally no hiccups after thousands of rounds from day one. I shoot it. I clean it and I shoot it. Best ever This one was udder disappointment. If I were to get another 9mm 1911 it would be the Operator

I have the same one, and has been great. Only have 300-350 through it. May just be a lemon. I’m sure Springfield will get that straightened out

I'd like to see what comes back from SA ... thanks for sharing.

Just needs breaking time. Polish your raile and slide with some nice Polish like mothers, that will help, and a couple hundred rounds too. 👍🏻

lol your sheriff will never help you .

Beautiful cattle!

Awesome video! - raising cattle on a family farm seems to be somewhat of a lost art these days. Thanks for posting this.

They are looking good!

Wow! you got a great view

Thats a lot of wind

Now that it’s been some time since this was put out, it’s come true. Oregon is looking at a bill to allow the government to seize anything they want in an emergency. What they deem an emergency. So many businesses have went under due to government. One comment said the government will take care of you. ( Must be a Communist). Tell that to those that lost their businesses.

Deutschland ✌🏻

I wish that millions of people seen this when you posted it. As setting a precedence could have ment us folk down here in the southern parts of Australia wouldn't be sitting on our horse watching our neighbors plow 60 acres of crops into the ground. I am thankful for my family and pray for a better tomorrow. God bless whom ever see this comment I pray for you .

How much extra power you feel you picked up with the Paxton sn93? Doing a project that came with one.

A lot of stores put limits to make sure everyone in their neighborhood will be able to get what they need. Unfortunately the stores at the coorporate level decided to put it our for every store instead of a case by case basis. Those limits were not imposed by the government but decided by each business on their own. I agree with the stay at home order. People like me and mom an die from COVID-19. As for as the businesses that are closed because their nonessential, the Treasury Department and the IRS have many provisions recently signed into place to protect (replace) lost profits and wages. The most important thing right now is public health and safety.

Excellent video, representative Luke Simons

Mike can you send me you email address?