Born Biker Titan

Пікірлер

@SaumBodhi Ай бұрын

My rear wheel won't move because the caliper is directltly attached to the hub. Not sure what to do.

@bornbikertitan5812 Ай бұрын

Ok do u mean ur brake caliper is stuck on ur brake disc and now u cant move ur rear wheel. Sorry im just tryin to make sure im understandin right.

@SaumBodhi Ай бұрын

@@bornbikertitan5812 sorry that wasn't very clear. I was a bit confused because the part of the caliper that's connected to the frame via some sort of swing arm was tightened solid and wasn't behaving like a hinge anymore, and when this happens you cannot adjust the rear axel & chain tension because it locks the wheel where it is. This is the bolt on the caliper that's attached to a rod going towards the front of the bike. When it is loose it lets the caliper angle change as you move the wheel, yet it keeps it from going too far around. I'm still not sure what to do with this part if I keep it loose or if i lock it and unlock every time i need to adjust the rear axel? The previous owner had it tight, so i'm doing the same... things seem just fine. If i kept it loose i might lose the bolt as I ride eventually. Yet i never see anyone adjusting this bolt in any youtube tutorials. I'm not even sure what the thing is called! Haha

@kevinabood3598 2 ай бұрын

thank you

@kevinabood3598 2 ай бұрын

best tutorial around on youtube good job!

@PwndersWoW 8 ай бұрын

awesome video😁😁

@MoisesdeMenezesMenezes 10 ай бұрын

Bom Baker titan um grande abraço sucesso GS500 e alovel moto you ok revisando parabéns Bom Biker

@MoisesdeMenezesMenezes 10 ай бұрын

Ok. Bom Baker sua GS500 e mesmo linda ok 👍 🎉ok.

@MoisesdeMenezesMenezes 10 ай бұрын

Ok bom ok yes junta do motor ok yes obrigado parabéns ótima revisão Moisés litoral praia grande SP Brasil ok 👍 👍

@nainka11 Жыл бұрын

Thanks... and... Well done

@solwaysandsRC Жыл бұрын

Appreciate your video and advice for next time to avoid issues getting the new spring on.. Has inspired me to see if I can do this on some older suzuki oem shocks that I thought were unserviceable.

@Butterfly07949 Жыл бұрын

Put some pvc insulation tape on the jaws of the spring compressor, and then there wouldn't be any scratches on the new springs. Good video mate.

@bornbikertitan5812 Жыл бұрын

Ok kool good idea thank very much for that.👍

@krisko1023 Жыл бұрын

Mah, man.. I own you a beer :D Just saved my butt from crashing somewhere cuz I`ve forgotten to place the spacer back in the tire.. You're the top G, thank a lot!!!

@bornbikertitan5812 Жыл бұрын

No worries, safe riding.

@vanruj Жыл бұрын

Oh wrong gasket I thought you r replacing on on top of engine😅

@vanruj Жыл бұрын

Do I have to change oil when replacing the gasket?

@bornbikertitan5812 Жыл бұрын

Hi, it just depends on how long u have had the oil in there for, i change my engine oil between 1yr and 3month- 1yr and 6months. Hope this helps.

@willriseabove6858 2 жыл бұрын

Thanks a bunch I had my chain fail and i needed to replace it and the sprockets however the minute I got the tire off things started falling and wasn’t sure how the went back together 😓

@Motorirumori 2 жыл бұрын

Sorry for my english do you have any video on how to make the same job with the OIL SUMP, basically under the oil bolt gaskets

@alejandrorauseogomes8915 2 жыл бұрын

Still helpful in 2022 thanks 😉

@itchyrocks5557 2 жыл бұрын

SOA Opie fan you think? 🤣 Full Beard: Check! Tattoos: Check! Toque with top flopping over: Check! Harley-Davidson Dyna Super Glide Sport : Did I mention his toque??? 😆 Sons of Anarchy: Tokyo Chapter 😬 This Opie is a Nopie! 😂 Just busting yer chops my man, no harm intended 😉 Cool of you to make the vids for the new riders out there, keep it up!

@octavianandrei3381 Жыл бұрын

this is exactly what I was thinking at while I listen the video:))))))

@Galamesh123 3 жыл бұрын

Are you from the south east mate? Fancy doing mine for me ?

@bornbikertitan5812 3 жыл бұрын

Na not from south east mate. What are you stuck on mate.

@rahanarichards5580 3 жыл бұрын

👍🏾

@LW91 3 жыл бұрын

Nice tutorial

@bornbikertitan5812 3 жыл бұрын

Thank you very much as long as it helps 👍

@rahanarichards5580 3 жыл бұрын

👋🏾👍🏾

@DTMotorcyclesEssex 3 жыл бұрын

Nice man 👊🏻

@mattduncan5500 3 жыл бұрын

@Born Biker Titan how on earth did you get the bolt off with the allen key , without holding the other end ?? (from inside) and i understood , the unit would just spin inside the shaft , if you didnt clamp it on the otherside

@bornbikertitan5812 3 жыл бұрын

On the other end of the falk were the big bolt seals the other end i found that the spring inside when compressed helped. But the red mud guard was still attached to the falk so it kept the body still.i hope this helps you fela.

@daviddalrymple3406 3 жыл бұрын

Very informative thanks

@viliusskarbalius8507 3 жыл бұрын

Nice video, im going to check mine and that was helpful. For future, music is very loud and youre talking quetly, so it would be nice if you alighn the sound volume. Cheers!!

@bornbikertitan5812 3 жыл бұрын

ok thank you for letting me know i'll keep it in mind.

@heemlo649 3 жыл бұрын

One mistake you made is the spacer needs to go on top of the spring for optimal performance, not the other way around. That's how it comes from the factory and how it is shown on the parts fiche.

@bornbikertitan5812 3 жыл бұрын

thanks very much for letting me know.

@ulfmusskacken 3 жыл бұрын

What the hell your clutch rod came out with the cover??? I'm confused

@bornbikertitan5812 3 жыл бұрын

Yep it came out with the cover because there was alot of dirt from the road but the push rod is fine not broken. I just put it back in its home on the bike it just needed a clean up. I can still change gears. Hope this helps. Let me knowif your still unsure.

@nelsonguerrero8056 3 жыл бұрын

Gracias por tu video explicas todo muy bien 👍👍👍👍👍

@sprinttomax 4 жыл бұрын

throttle on the left? wtf :0

@bornbikertitan5812 4 жыл бұрын

Yh doin recording frm my phone so some times vid is fliped. but we all kno throttle is on the right. Soz bout that.

@sprinttomax 4 жыл бұрын

@@bornbikertitan5812 Ohh hahaha

@agu160579 4 жыл бұрын

Muchas gracias!! Con tu video, he podido cambiar el aceite y los retenes de mi GS500E !! Gracias por tu tiempo!!

@Komnenos1234 4 жыл бұрын

Thanks

@philippash5264 4 жыл бұрын

Hi, found your video interesting, I have gs500 of which I have upgraded the front suspension which is worth doing. What difference did changing the rear spring make? Cheers Phil

@bornbikertitan5812 4 жыл бұрын

the difference i found was that my old spring had worn out even when i had done the adjuster to its max it wasnt springing up enuff. with the new the adjuster was on its lowest and it felt slightly higher and more solid. Im glad you found the video interesting. I hope this helps. good luk with your upgrades phil.

@philippash5264 4 жыл бұрын

@@bornbikertitan5812 Thank you for your reply I will go ahead with the upgrade, cheers phil