Hi; wonfer if new SC board and old board are same size..? can they be changed?
@ReadingStoryTeller2 ай бұрын
Nice vid
@jeffrobbins2 ай бұрын
Thanks!
@dcmastermindfirst94183 ай бұрын
Speed cobra is lame. Can't adjust it. Dyna sync is way better
@flatter333333 ай бұрын
With Bones Reds skateboard bearing is faster.
@tripledeluxedday3 ай бұрын
When I used to skate I used to take the bearings off my deck and boil them on the stove in water then re-lube them and put them back in the wheels and then put the wheels back on the trucks. We would spin the wheels after boiling and re-lubing them and they would spin far longer than before. Faster quieter and longer duration of spin. We used GMS bearings and when you boiled them some gunk would boil out into the water.
@XenoTravis4 ай бұрын
I lost most of my left eyebrow because a spacer wasn't put in right. That stuff can work fine until some random moment it finds the exact parameters to run the error someone didn't see. .... Don't worry it was an electric longboard. China man copied a board, slapped a cool design, did a good price and took advantage of the pandemic free money. The dude (Chinese dude still) never really tested much like QA such be done, they were after market. But... Apparently not when it comes to wheels. He never tested it or designed it so whoever gave him the files (Chinese is full of companies that copies whatever kinda thing) maybe didn't care Idk. The spacer was too short and I believe something wasn't correct on the bearing either. I don't ride crazy so I do full padding with gloves, 300 helmet (legit worth it), elbows, knees, a jacked that is padded in the chest elbow and back. I think one wheel just randomly got too much pressure and I got insane speed wobble (wasn't going fast maybe 15 tops) I jumped off, did 4 long save jumps to just think "oh shit this is how it ends." blacked out, apparently I got up and rode my board home because I don't remember getting home. I don't remember getting up and all that. Impressive. But ugly scar. The left out parts can really get insane but nobody asked or cares for my story. But yeah I like the speed cobra. Please don't mess up your spacers.
@edgardoarroyo74188 ай бұрын
which springs are those?
@donkkong55518 ай бұрын
I can not get my 310 to function a full capacity and what I mean is I can't hit doubles easily on every stroke for whatever reason, I have adjusted this thing a million different ways and changed the beaters and I just don't like it..Also, i feel the beaters over extend when hitting the bass drum head, the base plate seems like it needs to come closer when mounting to the hoop... My 20-year-old Iron Cobra is a better pedal, super annoying..
@chrisl2466 Жыл бұрын
Great video. Thanks for posting.
@cwx82 жыл бұрын
Not entirely sure what lubricating the outside of the ball bearings will do.
@ampegloud2 жыл бұрын
Umm umm umm ummm
@lucksury2 жыл бұрын
I’ve had problems with my slave pedal not rebounding and being as springy as the master pedal even though I have the beater height, beater angle, and spring tension all setup the same. I was thinking that disassembling the pedals and cleaning/relubricating would be the only way to get them to feel the same. I hope this works
@jamtime50172 жыл бұрын
Change the slave tension and use a pull test to see if they bounce together. I like to push the beaters to the bass drum and then release at the same time. You're not going to have them completely bounce consistently together. What are looking for is to get as many as possible. If you can get three or four NSYNC that's good start. Just keep adjusting the best that you can.
@TheBigman6032 жыл бұрын
What about gun lube?
@gregmartinez58363 жыл бұрын
Good looking out about those springs bro! Hell yeah.
@richardwilliams13103 жыл бұрын
For the price DW should give you the chain drive and direct drive assembly for each pedal to convert between the 2 different drive types instead of having 2 separate product lines ... then I watched all this video and seen that the mounting connection for the footboards are different, doh!!!
@tomverstappendrums34233 жыл бұрын
I had a rough squeak in my left pedal for years and I kept oiling it with the good stuff but it was no use. Finally took the whole thing apart and my lefty works great! Should have done this 4 years ago
@oskillah2 жыл бұрын
So you were oiling the slave bearings without taking them apart? I'm trying to get rid of squeak in my slave pedal!
@tomverstappendrums34232 жыл бұрын
@@oskillah Yeah just do what this guy does and you'll be pretty good!
@ozyhasari3693 жыл бұрын
what is the type of the bearing?
@tyedyedied3 жыл бұрын
How do you adjust the beater angle
@azribahari44203 жыл бұрын
The sexiest fire blade ever
@marcus_mayhem3 жыл бұрын
Hey just picked up a pair today. I appreciate you doing the video brother.
@sahanpalliyaguru77753 жыл бұрын
My dream bike
@drumken3 жыл бұрын
I have the same pedal for 7 years, since your video was new. Never tried to dismount it. But I could try that now, I think it's time for some cleaning! :P
@drumken3 жыл бұрын
I've done it!!!! Damn smooth!
@neelbill48303 жыл бұрын
My Dream bike
@AMJ5644 жыл бұрын
The falcons are good if you are a standard heel up player but if you use the swivel or heel toe techniques it can get difficult because the narrow foot board design.
@SilverScarletSpider4 жыл бұрын
So beautiful
@SS-qt4xq4 жыл бұрын
Actually to make that pedal faster it should tossed in a scrap bin and replaced with Trick pro v-1 bigfoots. 😁🙊 Tama speed cobra pedals are low end ...
@ponder854 жыл бұрын
For $400 more, I'd hope there's some benefit to the Tricks. My Speedcobras have been solid, and I'm very happy with them.
@mastertonberry92242 жыл бұрын
If you're going to act that cocky about having big money to spend, why did you cheap out on the tricks instead of getting czarcie kopyto supremes?
@SS-qt4xq2 жыл бұрын
@@mastertonberry9224 It's very difficult to get them in the US , and the waiting time is like a year...
@larrytate16574 жыл бұрын
Can’t believe they kept the springs on the inside.
@isaacsoto60864 жыл бұрын
Your mouth sounds like a slippery salamander slithering around in a slip n’ slide
@jlurenzjr4 жыл бұрын
Appreciate you trying to help people but your actually ruining the pedal. Those are sealed bearings. That lube your spraying on them is getting into the bearing housing and actually removing the grease that’s inside from the factory. All u can do with sealed bearings is replace them but those are very high end bearings that come with this pedal so their lifespan is very long. Cleaning up around the bearings and race’s is fine and even spraying a very small amount of chain lube is fine too but what you just showed people in regards to the bearings will cut their lifespan down dramatically.
@AnthonyLeeBand4 жыл бұрын
Jeff my favorite!!
@jeffrobbins4 жыл бұрын
Naples Home Improvements LLC Scottness!
@AnthonyLeeBand4 жыл бұрын
🤘😁🤘
@AnthonyLeeBand4 жыл бұрын
👍😂
@jpmking96355 жыл бұрын
when they go low....we go high....
@theneverendingjourney71975 жыл бұрын
After watching this I'm wondering if I can change the right twin pedal to a lefty
@k.bowers83725 жыл бұрын
What a Shitty video
@MrE19815 жыл бұрын
UHH UHHH UHMM UHHHH UHHMMM
@the6ig6adwolf5 жыл бұрын
This won't make your pedal any faster because it doesn't change the level of skill you're at as a drummer. It will make the pedal feel smoother.
@littlebear24775 жыл бұрын
The iron cobras are completely different to these !!!
@purpledc15 жыл бұрын
just bought these. Hope they end up being worthy. Bought the trick pro 1-V. I hated it. Bought three spring kits for it and it just sucked feel wise. When to a demon drive which was awesome for about a day before the heel hinge developed so much play you feel a knocking in both pedals. Even after trying to tighten them with their set screw adjustments. Heres hoping I made the right choice.
@purpledc13 жыл бұрын
@@chelososamusic still got them. Still LOVE them.
@analcough53215 жыл бұрын
Id be so fucking terrified bc i know my dumbass wouldnt be able to put that shit back together 😂
@SaberStudiosSydney4 жыл бұрын
This video of me trying it for the first time might help with that particular anxiety haha kzbin.info/www/bejne/j5DalJWhfMyloLM
@shahfacekillah5 жыл бұрын
I did this to my speed cobra and now the pedal is way too smooth!!!!!! Even at highest tension, I can barely feel the pedal!!!! I don't like it!!!
@JesusLordOfLords4554 жыл бұрын
I can imagine that feeling awesome dude
@kamilchowicki5 жыл бұрын
dislike for idiotic music :/
@stevespire36116 жыл бұрын
Wow man, lucky you. I live in south America and wanna get one of these. How different are they in terms of playing? Are the MCD pedals as smooth as the MDD, or are they more similar to the 9002? I have the 9002 and wanna buy the MCD, but I don´t wanna be desilusioned when I get them if there is no real difference.
@jeffrobbins6 жыл бұрын
Honestly, if you already have the 9002's and are looking for an upgrade with a different feel, get the MDD's. I've played hundreds of shows with them and they are awesome. You lose that "floating" feeling with the direct drives but they are my personal favorites. I love the quality and adjustablilty with the MCD's over the 9002's, but my go to is the MDD's. Hope this helps!
@stevespire36116 жыл бұрын
Yeah man, that´s the answer I was looking for. Even better if you already have played MDD. Thanks !! I think I´m gonna follow your advice and purchase the MDD. I appreciate it!!
@jeffrobbins6 жыл бұрын
Steve Spire Awesome, you won’t be disappointed, they are an amazingly high quality pedal and play so smooth. Enjoy!
@level27xrock11 ай бұрын
How are these holding up? Do you still prefer the MDD's over MCD? I'm in a similar boat, I got 9002's, love 'em, but wonder 'what could be'... if I got any of the MFG pedals... I've never played any direct drive pedal before. My local guitar center don't have them on kits to try out or play.. only thing I got really is KZbin vids for feedback. MCD's appeal to me... but if they are even slightly similar feeling to 9000's then I'd be better off just saving my money or going MDD. My current main project is a hard rock/grunge band, mostly single pedal stuff, do a lot of doubles, I saw someone else say for people who like to do these things a chain drive might be more suit, whereas fast double bass single stuff MDD's would be more beneficial
@franckduraesdaanunciacao47436 жыл бұрын
essa moto é linda muito estilosa de extremo bom gosto
@Fitheach816 жыл бұрын
Probably the best videos I've seen on this in terms of dismantling the pedal, cleaning & reassembly as well as being applicable to the Iron Cobra's - at least the 900 something or other ones. I just took mine apart recently to clean and apply lubrication, as well as putting the rolling cams on. There's a lot of screws and small parts to keep track of but otherwise fairly easy to do. There was a comment questioning the point of cleaning/lubricating - in 8yrs I've done it twice, dust and other tiny particles eventually find their way in, lubricant won't last decades either. Dust etc becomes trapped within the lube which increases friction and degrades the lubricant over time - might be much but it's enough that after cleaning etc the difference is there.
@Stankfaced6 жыл бұрын
Dave mustaine
@JesusLordOfLords4554 жыл бұрын
?
@dnanarv6 жыл бұрын
getting themselves out of the gene pool......
@bluesky64496 жыл бұрын
really painful to listen to, consider speaking at faster than 4am in the morning speed
@pitchingwedge16 жыл бұрын
They come with sealed bearings. Lubrication is not required. Except on the u joints.
@Mari0005 жыл бұрын
What’s the U joint?
@the6ig6adwolf6 жыл бұрын
Um, Um, Um, Um, Um, dude this is cringy as fuck!
@eastbaymauiboy6 жыл бұрын
This is a relatively old videos so I'm just taking a shot in the dark here. Are you still using them and how do you like them if you are?. I'm looking at these or the speed cobras. Which ones would you rather have now?
@jeffrobbins6 жыл бұрын
They are both great pedals, and I think you get more for your money with the Mapex, however, I ended up growing to love the speed cobras once I got them setup right. The adjustments aren’t as great on the SCs as the Mapex, but I got used to them and feel I can play faster with them then the Mapex. I have switched to the DW Machined doubles now, but all for the price these two pedals are fabulous.