How do you remove the front panel from the stacking kit if you want to take the tumble dryer off the washer (for example, if you are moving house)?
@footeking48654 ай бұрын
Can you stack the washer on top of the dryer?
@Sichenglou3 ай бұрын
Definitely not. The washing machine is a lot heavier than the dryer and produces tons of vibration during spinning.
@simoncairns296 ай бұрын
Miele is a solid brand. But don't be lured into believing that all products last for 20 years with minimal servicing. I have purchased several Miele appliances over the years including a Miele Tumble Dryer. At £2200 it was significantly more expensive than all of the rest of the available dryers on the market. Full disclosure, I bought a Miele Washing Machine in 2014. It had a 10 year parts and labour warranty. The dryer only had a two-year warranty. Two months after the warranty expired, the dryer started leaking. Two service visits later, I was told a pump had failed and needed to be replaced. The repair and parts cost over £350. The last technician said it was the first pump he'd replaced on this machine in all his time at Miele. With this in mind, and aware of Miele's reputation for building quality long-lasting products, I proposed to Miele that they waive the invoice. After all, it was just after the warranty, but only two years into my "twenty years of reliability." Miele would not play ball at all and insisted the bill needs to be paid. £2550 is an awful lot of cash to be spending on a tumble dryer, when Bosch offer a heat pump tumble dryer for £500. Customer Service were not helpful at all. Just be mindful that good products do go wrong, don't expect Miele to stand by their 20 years of reliable service claims.
@leanne23307 ай бұрын
Where to buy new Miele hinge pls
@adamevo610 ай бұрын
Very helpful and well explained
@Frangipani_Flyer10 ай бұрын
These are fantastic at what they do. I’ve just bought a second one for another house. Super flexible but I wish the dust tank was a bit larger. I wouldn’t hesitate to buy a third one.
@deborahdaviesdd-artist105911 ай бұрын
Can you please ask whoever that man is if he would like to marry me please? I have been pulling my hair out. I always read the manual but the manual is in Portuguese because that is where I am and I don't speak Portuguese! Anyhow, I'll wait for his answer. ;)
@NikhilInamdar8711 ай бұрын
Hahahaha
@DM_and_YouTube_SEO_expert11 ай бұрын
Hey Mam, can I talk to you about your KZbin channel growth?
@DM_and_YouTube_SEO_expert11 ай бұрын
Hey Mam, can I talk to you about your KZbin channel growth ?
@EnockOlogo-kn3et Жыл бұрын
Thanks u alll
@YaasBoutique Жыл бұрын
❤️
@sergioortiz1839 Жыл бұрын
How often should the drain hose be drained?
@sergioortiz1839 Жыл бұрын
Does this dryer have a gas line?
@jobond3317 Жыл бұрын
Can use a wok on Miele cooktop
@garlicbread312 Жыл бұрын
Delicious!
@aztekboyca Жыл бұрын
If you don’t take out the transportation bars does affect the performance of the unit?
@rocus80m Жыл бұрын
I cant believe it you have to drill holes into a washing machine... :/ looks like more a DIY Solution
@raquelhernandez3773 Жыл бұрын
Do the screws actually go into the washer? Would it leave holes on the washer if you decided to un stack the washer?
@adrianbulete Жыл бұрын
Valid question! 👍
@annesheehan712 Жыл бұрын
Thank you, very clear and informative video. One question: what sort of stock is suitable - cubes, premade, or does it have to be home-made? I'm over making 2L of stock each December. Thanks.
@robertchallen Жыл бұрын
I have to unstack my washer/dryer for moving....how does one get that facia plate off to access the screws?
@Lakaloa Жыл бұрын
I'd like an answer to this too. I haven't clipped the fascia in fully yet as I see this being a problem.
@conrad3k Жыл бұрын
You can pry off the face plate even if it clicks into place. I tested this before installing - wanted to be sure it can be removed afterwards 😅
@washinglover3952 жыл бұрын
Gorenje is better
@pamelamedina48092 жыл бұрын
ᑭᖇOᗰOᔕᗰ
@jityagurjar2 жыл бұрын
Can we have a similar detailed video for WWG 660 wcs please
@jityagurjar2 жыл бұрын
Excellent detailed video . Could you please film one more detailed video for WWG660wcs for 9 kg washing machine
@jm03617 күн бұрын
Same thing. And I have a WWG660 WCS.
@caroltehuki72322 жыл бұрын
This is the worst washing machine on the market. Absolutely zero quality control. Damaged goods delivered, 3 times!!!. Shocking store controls at HN and zero customer satisfaction as far as I'm concerned. Beter to spend your money at the laundromat, heaps more satisfaction.
@Trafce2 жыл бұрын
1st ....
@TheBeaster662 жыл бұрын
Overpriced piece of crap ....
@insanelook2 жыл бұрын
I used the wtv502 and installation was same as this video which used 501. Happy ending.
@yorumustasi2 жыл бұрын
I have a few questions about the screws, will it damage the washing machine? Are the screws going through the washing machine? If it is correct, I would like a different accessory, is there an alternative?
@insanelook2 жыл бұрын
It does and it's the only way to do it and the final result is just great. U won't see anything when the dryer is on the washing-machine afterward anyway.
@rocus80m Жыл бұрын
Absolutely agree with you, thats more like a DIY solution, than a professional Miele solution so wtf You can find some other solutions where you dont need to drill holes, but use a strap lol not sure what is better
@elleism2 жыл бұрын
This tutorial was brilliant, thank you! It was so much easier to follow than the paper instructions, which were in German.
@yasertaalo24909 ай бұрын
Wie heißt bitte auf Deutsch der Kunststoffsockel, der die beiden Maschinen verbindet?
@JinKee3 жыл бұрын
so deep
@BaccaratZorro3 жыл бұрын
赌侠-佐罗 Z 😎横空出世!为拯救水下众生,独家首创起牌“金三角“打法,即使庄家做牌也对你无能为力!有视频为证,切勿错过!!!从没有碰过百家乐者,勿进!!!赌博是世界上风险最大的游戏!!!三思而后行!!!
@jessaandaya6763 жыл бұрын
what is the highest ht. can the feet adjust?
@kheilasreti45353 жыл бұрын
😂😂😂
@anaperezsanchez17173 жыл бұрын
Cuanto vale la secadora? Lo no
@anaperezsanchez17173 жыл бұрын
Precio de la secadora pequeña en Amazon
@89retal2 жыл бұрын
Unos 900 euros
@RyanF70183 жыл бұрын
They have a type of fiber board on the top of the washer it does not do any damage to the washer as long as you follow the guide correctly and have it square on top of the unit. Took 5 minutes brilliant stacking design.
@RyanF70183 жыл бұрын
@@trollmeister69 if you stack it leave it stacked , if you must remove it leave the stacking device screwed into it.
@stevieg64183 жыл бұрын
Miele should stop using old display technology - everywhere now is AMOLED etc. The new induction hob with the colour display is ugly due to the fact it is and old TFT screen used.
@Puckerization3 жыл бұрын
Not very informative is it?
@LoveMeBack4 жыл бұрын
SonI have to drill holes in my 1500€ machine?
@TomTom-zb7cu4 жыл бұрын
I have the same question. does this mean that I will lose my warranty?
@woutschotsmans64823 жыл бұрын
So, do you need to drill holes into the cover of the machine?
@whacklp61203 жыл бұрын
that's absolutely dumb, find a different kit.
@yorumustasi2 жыл бұрын
Same thoughts, do you know an alternative?
@LoveMeBack2 жыл бұрын
@@yorumustasi I used a few pieces of gorilla tape with the 512.
@ridhwaanarries9834 жыл бұрын
Jane Wilson i have the same philosophy about a quality product.Thank you for the customer feedback video.Thank you Miele.
@iGuille4 жыл бұрын
Is this the same guide for the WTV502?
@yorumustasi2 жыл бұрын
That is my question too
@insanelook2 жыл бұрын
Same yes as I got the WTV502 and followed that video which used the 501, no difference of installation and same final result.