You sure it's not 10530 the clocks reset after 10k

Make an offer

@@dgautomotivefabrications5817 10.000 €

£23,000

@@chickensound 😂

Don’t do it these tractors gave issues rebuild the 2140 engine or find another to swap

@@xade7863 I sold it lump of scrap

@@drone_tours u couldn’t find a rebuild kit or someone to rebuild it for you?

@@drone_tours You couldn’t find someone to rebuild it for you?

@@xade7863 I rebuilt it but I did not like it

Thank you! Cheers!

damo690 this one was lying in a hedge for about 30 years Someone had taken it out and took the head off messed with the timing to try and get it running I bought it and stripped it all down I was 14 at the time so couldn’t afford to rebuild the engine ie bottom end So I cleaned up the head , valves and bores Did the timing and eventually got it running However I It was breathing heavily and really did need a rebuild but after a year I had finished doing all the hydraulics rebuilt the gearbox and steering ect and by the time I was 16 I bought an engine rebuild kit and fully rebuilt the engine had the head skimmed crank ground everything new including oil pump new clutch bearings everything By the time I finished it it had the best compression I’ve ever seen Bled it all gave it a few turnovers by hand and fired straight up no problem at all Only restored it as it was a massive learning curve

Niall Rabbitte yes I think the tractor was brought over from Ireland many years ago

Trail bike Will was 3 years ago as this is when it was posted

Daniel Schott will do about 15-16 mph mate

Looking around 15mph

At the time it hadn’t run in a while and it wasn’t starting well so the easy start came out however a week ago I have just fully rebuilt the engine Crank ground head skimmed new valves and piston and liners she stats straight away no heat and no throttle

@@dgautomotivefabrications5817 my old man had a diesel one like this when he was young, it always started on half a turn on the hand crank handle, they were too poor to afford batteries!

Thereeasy started when timed correctly. Mine would start in below zero temperatures without heat

He been at the squirt can. No spark engine needs it. It is addictive

modelfarmer fs It’s a diesel and I’m currently fully rebuilding the engine doing the crank and pistons

@@dgautomotivefabrications5817 oh right good jab, what's she like on diesel and how long would a full tank do her

jimmy galloway I bought the loom and it comes with a diagram

Your Governor and weight springs needs attention....easy and quick to do.

Check the pipe from the governor to the throttle by removing the pipe, covering the outlet of the governor with a finger, pulling the stop and check if the stop remains out. If not the diaphragm may be bad. If that's OK check the control rod, which is the toothed rod visible when the inspection cover is removed.

Abonaded channel always been adjust your throttle mate

MrP4LM3R I’m not too sure I forget

they are 6.00 x 16

Ah, interesting, ive seen te20's with 19 inch front rims, perhaps there was a choice of sizes back in the day.

They originally came with 4.00 x 19 but many people put the larger wheels on as they don't sink or tear up ground as badly. It's quite interesting to see the transformation of the tractor from when you first got it to what it is now. Keep up the great videos

Cheers thank you nice to see when yours is done, doing any shows ?

Ohh nice and cheers unfortunately this beaut is for sale as need the space and money but she's a good runner for 40 odd years old

Evan Ryan when we bought it she was like that my guess is it's been tweaked at bit

Would love to see under bonnet of her if u could do a video that would be great I have a 6200 myself and she doesn’t make boo noise

@@dgautomotivefabrications5817 is there any chance you could do a video of the turbo set up?

It has have a straight pipe exhaust

Tef20 man cheers no it's a hole near the stain of the gearbox so I'm just going to fill it and I've just put an oil seal on it