How thick of wood did you use and how long did it take to cut the monogram? I’m thinking about one of these machines. I’m sure I’ll be impressed since the only experience I have is from my Xtool diode 20W. 😂 I don’t get much production in a day.
@merlinunderwood8494 күн бұрын
Can I get the discount codes..just incase I need one!!
@thatlaserdude4 күн бұрын
@@merlinunderwood849 $200 off F1 and F1 Ultra: TUF1DARRYL200 $200 off S1 40watt: TUS1DARRYL200 $150 off S1 20W: TUS1DARRYL150 $100 off S1 10W: TUS1DARRYL100 $250 off P2: TUP2DARRYL250 $500 off P2 and F1 Bundle: TUPFDARRYL500 $200 off M1 Ultra: TUMUDARRYL200 When you use this link. xtool.pxf.io/baK9x6
@gloriamccoy69296 күн бұрын
UMMMM LOL If I didn't know how busy you always are I would have to say you have too much time on your hands
@thatlaserdude6 күн бұрын
@@gloriamccoy6929 Hahha. It’s true
@michellejonas15547 күн бұрын
What do you use for hanging your spray paint?
@tomzphone9 күн бұрын
After installing the riser base, how the hell am I supposed to use the laser now? It won't measure the distance, because everything that I want to cut/engrave is sitting too low.
@ThatMomWithALaser10 күн бұрын
🔥🔥🔥
@StupidBulletsTech10 күн бұрын
Beautiful. I wish I had that much space!
@thatlaserdude10 күн бұрын
@@StupidBulletsTech thank you!!
@mohcine01112 күн бұрын
What about xtool p2!?
@thatlaserdude12 күн бұрын
@@mohcine011 I have one. It’s a very good desktop starter laser. I also have a code for $250 off if you like. TUP2DARRYL250 when you use this link xtool.pxf.io/baK9x6
@mohcine01112 күн бұрын
@@thatlaserdude thank you for your answer, I mean how to avoid the burn without using masking tape
@Dedra-bj1oe18 күн бұрын
I love your quirky energy because I speak the same language! Lol. Thank you so much. Your video is extremely helpful. Just bought my laser and am ready to hit the ground running 🏃♀️
@thatlaserdude18 күн бұрын
@@Dedra-bj1oe thank you ♥️. Come join my Facebook group. So many helpful people.
@LaserGranny18 күн бұрын
Got my Mira 9 today. Now I am positive I need some real man power x5 or 6!!!
@Metanoia4623 күн бұрын
how can i remove the laser engraving if i wanted to get it back to plain?
@Cleaner-World24 күн бұрын
annoying, yet useful!
@dgperforms125 күн бұрын
Thanks man! Looking to get my first Laser. New Sub here
@thatlaserdude25 күн бұрын
@@dgperforms1 awesome. Thank you. If you need help picking a laser I’m happy to help. You can email me at [email protected]
@RobSandstromDesigns25 күн бұрын
Good video - just subscribed based on your email to me after Laser Maker Con.
@jessetutterrow432026 күн бұрын
The edges of the cut pieces will be black from the laser. When you spray paint how do you avoid paint splatter getting on the edges?
@thatlaserdude26 күн бұрын
@@jessetutterrow4320 I have never to this day. Had a customer complain about some of the overspray. But if I do want a perfectly clean finish on the edges, you can take some dark stain or paint. It’s just a lot more work.
@thatlaserdude26 күн бұрын
@@jessetutterrow4320 I have never to this day. Had a customer complain about some of the overspray. But if I do want a perfectly clean finish on the edges, you can take some dark stain or paint. It’s just a lot more work.
@bitacita63628 күн бұрын
hi dear, I have the Gloforge Aura, but I don't know how to set them up. Can you tell me how I can set it to draw on the back of my iPad? thanks
@MileyonDisney29 күн бұрын
Awesome!
@MileyonDisneyАй бұрын
Hi, That Laser Dude! Just saw your LaserMakerCon video about Christmas. Awesome tips! Thanks!
@bettythomas13Ай бұрын
Great Explanation. I have watched other videos explaining kerf and this is the best one.
@mrsdizi1234Ай бұрын
Do Not buy!!!!!
@justineolausen1115Ай бұрын
How come you iron it ?
@thatlaserdudeАй бұрын
@@justineolausen1115 it’s a little palm sander. 😊
@justineolausen1115Ай бұрын
@@thatlaserdude oops 😂
@thatlaserdudeАй бұрын
@@justineolausen1115 ya gave me a chuckle. 😆
@justineolausen1115Ай бұрын
Love your videos , thank you :)
@patrickobrien4266Ай бұрын
Those are awsome !
@user-ls3cg2dd6mАй бұрын
This cracks me up. Way too funny
@thatlaserdude6 күн бұрын
@@user-ls3cg2dd6m ♥️🤣🤣
@nato7.62mm4Ай бұрын
Hey I have something laser related that I dont know what to do with, it was new when I got it like 2 or 3 years ago and it has just been sittin' in my shop so any ideas of what I could use it for? Or could you use it for its intended purpose? It is a CAMFIVE SL-1D (specialized chiller for CO2 laser generator) if I cant figure out something to do with it and you dont want it, then I am probably gonna have to scrap it... I live in Atlanta but will be moving to Talladega Alabama in November... L8R G8R. :-)
@thatlaserdudeАй бұрын
Please use my link here darrylaspin--thatmomwithalaser.thrivecart.com/encore-vip-pass-limited-offer/
I'm just getting started in laser cutting, what wood is best used when spray painting and is that 1/8 or 1/4 inch. Thank you, I'm glad I found your channel to help me along here.
@jessetutterrow432026 күн бұрын
I would use the 1/8-inch. You have three layers and if you used the 1/4-inch it would be too thick and heavy.
@DiabloHVAC26 күн бұрын
@@jessetutterrow4320 Thanks. That what I was thinking.
@lindagurns9613Ай бұрын
Great video! Thanks for all suggestions 🙂
@latoyasanders16292 ай бұрын
Thank you ❤ I needed this so bad. All my questions answered!
@jessicaburns72372 ай бұрын
Just aligned my mirrors and im ready to make my first cut. Do I always have to have my computer hooked up by usb to the laser?
@chadtuggle98142 ай бұрын
Just finished my first one! Love it, great file. Only hard thing about is deciding which pieces i wanna use lol.
@donniewakemup87292 ай бұрын
Is this an upcoming video? I really like the look of those. Is that your own design or am I able to download it?
@thatlaserdude2 ай бұрын
Everything is do is my own art. Drawn by me. No clip art. 😊. But this particular design is for members of my subscription group only as part of a 30 sign bundle for their June design. All my other art is available at www.thatlaserdude.com
@UnitTx19532 ай бұрын
So when will this be ready???
@thatlaserdude2 ай бұрын
It was released but is a file for members of www.forgeworldplus.com as part of a 30 sign bundle for their free June file. 😊
@phillgriffith2 ай бұрын
The 20w S1 comes with a lower wattage power supply unit, so upgrading the laser module requires a new power supply as well. xTool sell the 40w as a very costly kit. What is a shame is they don’t seem to sell a 20w module for 40w owners. Basically get the 40w then you have the versatility, unless all you plan to do is engraving. Great machine. Fun video. Thanks.
@traviscagle98076 күн бұрын
You can reach out to them and they will sell you the 20w head.
@michaelwillson68472 ай бұрын
I agree just need find the cash for laser 😕
@jhoanset3 ай бұрын
Excellent!
@nicolaaloisio24743 ай бұрын
Great video. Any chance I could talk to you about Amazon Handmade? Trying to decide the best place to sell what I make.
@mikemarsh94953 ай бұрын
I want some of what he has had 😂 Great video and explanation of kerf.
@Grafikdetail3 ай бұрын
Awesome work, Darryl!
@user-ff5bo1qe5x3 ай бұрын
WHAT PATTERNS ARE BEST FOR ENGRAVING ON METAL?
@Rcschim3 ай бұрын
hope you take this as constructive feedback: your audio sucks ;) way too much echo, prevents me from watching it further tbh... greets from Austria, Mario
@thatlaserdudeАй бұрын
I know. And it’s great feedback. I am really struggling trying to figure out how to make it better. I’ve bought a few different mics. I can’t seem to figure it out.
@SullyWags3 ай бұрын
Great explanation and easy to understand! Thank you, look forward to more videos!
@LakesideStreams3 ай бұрын
Will the S1 40W cut 1/4” MDF?
@deejanssen15713 ай бұрын
LOVE your videos and reels.
@karenhadden49803 ай бұрын
Great review. I love my S1 40w!
@1-Nice-Guy3 ай бұрын
I'd like to confirm...did xTool provide you this laser?
@michelemmacleod3 ай бұрын
You two are the best. I am always learning and laughing during your videos.💗