hi sir. i can't see com port for mini 2SE, please help me
@johnlagreca628816 күн бұрын
Thank you, nice presentation. Would setting this up for multiple clients (i.e. 5) be as simple as getting 5 receivers, a powerful enough workstation and then mapping ports for each instance of OpenWebRx? 5 receivers would require muxing an antenna or is there SDR HW with multiple receivers on a single Rx antenna port available out in the world that WebSDRRx could work with?
@ianxbu509116 күн бұрын
@johnlagreca6288 yes should be as simple as that. You could do it with one receiver but then all 5 clients would have to listen to the same band
@johnlagreca628815 күн бұрын
@ianxbu5091 Yes, I see, clients can listen to/decode any frequency within the currently recieved spectrum width (aka 'band').
@銃翼17 күн бұрын
Can anyone that bought it give it to me for free? I dont think its a big deal considering you can just make a copy for yourself too.
@jeanmorales6159Ай бұрын
I am getting this cide but my Drone has never been droped damaged in any way or crashed, its always been kept in a water tight hardcase made for it btw its a mavic 3 pro
@fm5184Ай бұрын
Thank You Thank You Thank You!!! work great! but $28 dollars later jeje.... still worth it
@MohammedRadman-q2k2 ай бұрын
I have mavic 3 how i can fix it?
@XXXJAB2 ай бұрын
Im hearing GB3MCB IO70OJ
@ThJkR-cd5kr3 ай бұрын
Hi, Thank you so much for your help. This guy helped me to fix my Mavic Air2s with the gimbal. Excellent remote service :D
@dlambethful4 ай бұрын
I can get the PicDisplay to show in the main window. It's always grey, not matter what skin I use.
@ianxbu50914 ай бұрын
Check your file name of the new image,it has to be correct
@dlambethful4 ай бұрын
@@ianxbu5091 I found the problem, there was a checkbox checked that was stopping it. Thanks : )
@jeremykip64414 ай бұрын
Pls give it for free bro
@ianxbu50914 ай бұрын
It's not my software. I had to buy it too!
@jeremykip64414 ай бұрын
@@ianxbu5091 : ( can you send the software i wil give you 5 euro
@g1f2d3s4a54 ай бұрын
not working for me :( it says "error in opening serial port com 5:5 can not open port !! 5 you know this issue? what am i doing wrong? btw thanks for this video. love that kinda game :)
@ianxbu50914 ай бұрын
It sounds like you are using the wrong com port. Check device manager as to which com port the computer has assigned to the drone. Also make sure no other program is trying to connect to drone on that port
@g1f2d3s4a54 ай бұрын
@@ianxbu5091 your tip with the other program helped me ! thanks a lot !
@BOSSGAMERS9123 ай бұрын
had same issue. make sure DJI assistant app recognizes your drone. then proceed to command promt
@spikyhercules4 ай бұрын
Where can I download this
@ianxbu50914 ай бұрын
It's a webpage so you can't download, but can access it here: g0xbuwebsdr1.ddns.net Or here: Http://g0websdr.ddns.net:8901
@RachmadMoko5 ай бұрын
use for mini 3 and mini 3 pro can or no?
@RachmadMoko5 ай бұрын
40021 also 40011 can user this software or not
@Crypto_AL-p9b5 ай бұрын
I just did this last week on my mini 2 after I replaced the gimbal...............the needed programs/files are available if you take the time and research
@jeremykip64414 ай бұрын
where?
@godonz45 ай бұрын
hi, thank you for this video. please, i have a marvic air 2 that is bound to a remote but the remote is not handy. can it be unbind? i was not the original owner. i bought it from ebay after my previous aircraft flew away
@ianxbu50915 ай бұрын
Hi, the official method is to contact dji support with your problem. They will try and contact the original owner on your behalf. But if that fails they won't help you any more. This happened to me so the next step is to replace the motherboard with a non bound one. I found it cheaper to buy a damaged drone and salvage the part I needed then sell it on again to recoup cost. This video then shows how to remove the error that will appear after changing motherboard (on a mini 2). Good luck
@NunoFlyer7 ай бұрын
This is a link for service or I will get a software?
@ianxbu50917 ай бұрын
Hi, the link in the description takes you to the website which sell the software required to do this.
@arthurgumbus39697 ай бұрын
Great Job thanks. Very clear explanation.
@Diki587 ай бұрын
Hello, have you already thought about installing OpenWebRx+ under Red Hat Enterprises distribution including ELK (ElasticSearch Logstash Kibanal)? Sincerely
@Diki587 ай бұрын
Hello, have you already thought about installing OpenWebRx+ under Red Hat Enterprises distribution including ELK (ElasticSearch Logstash Kibanal)? Sincerely
@Diki587 ай бұрын
Hello, have you already thought about installing OpenWebRx+ under Red Hat Enterprises distribution including ELK (ElasticSearch Logstash Kibanal)? Sincerely
@Philip-KA4KOE7 ай бұрын
You didn't say when you were switching
@TheExoticBeard7 ай бұрын
Your WebSDR is the best as someone who's far away and still don't have equipment even if I have I can't hear the UK 2m cool conversations from here .. so thank you for the clean work .. as a servers and hosting guy your websdr is a state of the art .. the online feed back to give is to find a way to show the Audio + waterfall + DSP controllers showing in the same time I suggest to move the waterfall controllers from the tab to the main GUI maybe top side of the green tabs .. or maybe multiple tabs rows so we can show multiple stuff in the same time
@philipcollier78058 ай бұрын
Well done! WebSDR needs more tabs to reduce the clutter. This layout is smart.
@ianxbu50918 ай бұрын
Thanks. Do you think it needs even more tabs or are you saying websdr software in general needed them and this achieves that?
@MikieLAX8 ай бұрын
Thank you for this video and it answers the question I was also pondering after my recent experimentation with both WebSDRs and now FT8. Question: What is the virtual audio cable to my computer and how do I establish one? Thank you again. UPDATE: Oh, I see the download now in the expanded Notes!
@ianxbu50918 ай бұрын
Hi, so virtual audio is a software based audio connection. If you Google it you can download it and set it up on your pc to allow virtual audio connections between applications
@ianxbu50918 ай бұрын
Hey Ben, yep works lovely now and no errors!!
@benm1mlm8468 ай бұрын
You've sorted it then , excellent 😊
@svgaming2348 ай бұрын
Thanks!
@valvemonky473410 ай бұрын
hi is your site not working tried today but no audio
@ianxbu509110 ай бұрын
Yes it's all online ,which browser are you using?
@valvemonky473410 ай бұрын
@@ianxbu5091 HI 1 is working fine but 2 there is no sound the button to start sound is not working i use firefox but have had no problems before
@valvemonky473410 ай бұрын
@@ianxbu5091 HI i have checked and tried on two laptops and still no audio i am aware of the changes to make it work properly on firefox J1 was working for a short time but both are silent never had problems before i know you have had your antennas down due to the weather is it best to email you direct ? very good site it
@ManuelPinner11 ай бұрын
this software be nice if have the ability to receive DATV,
@michelsofia7389 Жыл бұрын
Hello I cannot add additional bands, otherwise my Raspberry Pi freezes and I have to restart it. The band is added, but every time I start listening, my Raspberry Pi freezes and stops. I am using an RTL-SDR V3 dongle
@ianxbu5091 Жыл бұрын
Sounds like you have an error in the band profile. Perhaps incorrect frequency/sample rate? Or not selected the correct rtl device?
@michelsofia7389 Жыл бұрын
@@ianxbu5091 "I have the two default bands set up, and if I create a third one with the same configuration, for example, for VHF, the save is done with the same parameters. However, as soon as I start playback, the visual spectrum is greatly enlarged, I have sound for a fraction of a second, and then no more sound. I am forced to restart the Raspberry."
@Mach7RadioIntercepts Жыл бұрын
That's a lot of manual poking about to start things... Are there scripts which can query the system and then init the dongles?
@Mach7RadioIntercepts Жыл бұрын
You did great work on the new interface! I am so glad to see operators setting up more efficient layouts, with tabs, a larger frequency display, better waterfall colors, etc.
@mrtechie6810 Жыл бұрын
If you upload a new map background centered on your QTH, can you configure spotting to place contacts on the correct parts of the map?
@ianxbu5091 Жыл бұрын
No I don't think you can, it puts the spots on the frequency they were spotted rather than where they are
@mrtechie6810 Жыл бұрын
@@ianxbu5091 ohhh, I thought you could show their geographical positions on the map!
@mrtechie6810 Жыл бұрын
Your KZbin audio is very low!
@ianxbu5091 Жыл бұрын
It sounds pretty loud to me, I just had to turn it down when I listened!
@mrtechie6810 Жыл бұрын
@@ianxbu5091 no, it peaks at only -25 dB. The level should be much higher for broadcast.
@anonymous_friend Жыл бұрын
For a newbie to SDR, What setup can you recommend? I'm a General class ham operator, but have just entered the world of SDR. I can afford more than a $30 dongle if there is something better. I've noticed airspy hf+ discovery gets good reviews. You seem very advanced, so your advice is appreciated. Thanks
@ianxbu5091 Жыл бұрын
Hi, so the sdrplay devices are pretty good. They can cover a good range I clouding HF and also include built in front end filtering. They cost around 100 pounds. Also the new rtlv4 dongle gets good reviews. Perhaps get a nooelec dongle to begin with then progress to the more expensive devices after
@Sarge198 Жыл бұрын
Thank You!
@mightygibgib Жыл бұрын
G’day Ian. I was going about a network SDR using much more complex methods and then i saw your video. This idea is perfect for my application. There is a crucial criteria though, will this plus version work with RTL-SDR V4 usb? Cheers Gerry
@ianxbu5091 Жыл бұрын
Hi, I'm pretty sure it will work with the v4 as it uses the same device string as the rtl v3, which mine is using
@mightygibgib Жыл бұрын
Thanks Ian I will give it a crack tonight!@@ianxbu5091
@JtagSheep Жыл бұрын
Thanks for these videos on customising OpenWebRx+ it has been useful to know where python/owrx stores its htdocs I have never done web dev with python before only FullStack with HTML/CSS/JS. In the openwebrx.css file the first reference to the webrx canvas sets the background via default css and the following two @support code blocks implement support for other browsers, whatever browser you are using results in the correct css support block being used for required css features. Changing all 5 references is the correct thing to do when looking to make this work across most browsers :) thanks again!
@arthurtwoshedsjackson6266 Жыл бұрын
Hi Ian. Just installed the + version on a raspberry pi. How do I about getting this pi online so that it can be listened to remotely. What software is required etc , so like yours in can be heard on receiver book etc. thank you
@ianxbu5091 Жыл бұрын
Hi, you would need either a static IP address for your home network from your isp or use a dns service like no-ip. Then you need to set up port forwarding in your router to forward the openwebrx port (8073) to the Internet facing interface. Then users would enter your ddns name or public ip with the port number on the end into their browser and it should work
@davidmorris1957 Жыл бұрын
Hi I tried to upgrade to the plus version like you say In video but once done I load web browser and it's not the plus version ist the non plus version still. I am using Ubuntu as my os. Thank you
@ianxbu5091 Жыл бұрын
You need to press control f5 to clear the browser cache and reload
@davidmorris1957 Жыл бұрын
@@ianxbu5091 did not work I still can't upgrade
@Scotscan Жыл бұрын
is there anyway to do all this without a raspberry pie. Why can't we just get a windows install?
@ianxbu5091 Жыл бұрын
Hi, it won't run on Windows as its based on Linux. So it will run on another Linux machine. Check out openwebrx plus on github
@cowgoesmoo3850 Жыл бұрын
9-14-23 webSDR and the androjd app for it it workings.
@Test_Card_Tom Жыл бұрын
Hi, the WebSDR 2 page not longer loads on my laptop. WebSDR 1 does. This happened yesterday and today 01/9/23.
@ianxbu5091 Жыл бұрын
Hi, did you not make a note of the new url's on the notice banner? It's now at g0xbuwebsdr2.ddns.net Server 1 is at g0xbuwebsdr1.ddns.net Cheers
@Test_Card_Tom Жыл бұрын
@@ianxbu5091 Thank you. I did use the new url's but only WedSDR 1 worked - I have tried again and and happy to say WebSDR 2 is now working. Cheers.
@antonyhenson8969 Жыл бұрын
I was using this earlier today on 6/8/23 but could only pick up one side of the communications. Do you have any idea why, and is there a way to fine-tune the conversation
@ianxbu5091 Жыл бұрын
Hi that could be due to numerous things. The websdr couldn't hear the other person due to distance or them being on a different frequency perhaps
@ianxbu5091 Жыл бұрын
To fine tune,try clicking the filter tab then selecting a narrower filter, this sometimes helps on weak signals. Also there is a enhancement button on the dsp tab
@dennis8019 Жыл бұрын
inpossible to get working websdr package from pa3fwm he is just not sharing it so easy anymore :( i have multiple sdrplay to play with.. is there not a simulair alternative (not opwebrx) ?
@williethepimp Жыл бұрын
Ian. Going back to this, you entered the locator but would the locator not come up when entering the call-sign and then be replicate within the rotator widget? I understand that qrz xml data may be incorrect but I'm interested in whether entering the call-sign would input the registered locator heading into the rotator widget?
@ianxbu5091 Жыл бұрын
Hi, no it only works from the locator entry, unlike PST Rotator which can lookup callsign's from QRZ. I mostly use PST instead for rotator control.
@sebastienhumetz9169 Жыл бұрын
good job tnx from corsica isl
@Antenna101 Жыл бұрын
Is it possible to set up OpenWebRX without a raspberry pi?
@ianxbu5091 Жыл бұрын
Yes you can put the software on a pc or laptop running linux.
@xiaohuiliu5981 Жыл бұрын
Hello IanXBU, I tried to follow your instruction but stuck at very beginning: password for ssh. It looks like the password no longer raspberry for OpenWebRX 1.2.1. Could you double check? Thank you.
@ianxbu5091 Жыл бұрын
I dont think i covered SSH access here. Just how to create your own admin account for the openwebrx software. The default Pi user doesnt exist so you may need to create one. See here for more info: github.com/jketterl/openwebrx/wiki/Setup-Guide#raspberry-pi-sd-card-images
@LionTurbo Жыл бұрын
Hello, you have a cool project, I would like to repeat it, can you please share the materials and software for this?)
@ianxbu5091 Жыл бұрын
Hi, which bit do you want to repeat as I covered quite a few things. Rotator control or websdr? I have some other videos relating to websdr, 73