The shop is trying to charge me $485 to do this??? That’s wild
@aftereartharcade9 күн бұрын
Its less then 1 hour job for the shop... $200 per hour QQ crazy. I'm sure you know this but its good to check the battery before you replace the starter. Junk yards will sell very cheep tested battery if you are in need of something inexpensive.
@cronicjohnson28 күн бұрын
Maybe you know but is there. Speeduino build to do 5 sequential cylinders? I think the drop bear goes up to 12. Is there like a diy viersion of the drop bear or similar?
@aftereartharcade28 күн бұрын
Thanks for the comments! :D This U4C has 4 channels and can do up to 8. You pair 1 channel to 2 cylinders. dropbear from my understanding has 8 so you should be able to do a v12 with a drop, but v04 boards like the one the u4 is based on have 4 channels. more info in link wiki.speeduino.com/en/boards/Dropbear
@technojunkie213Ай бұрын
What is your wrench extender called and please provide link to purchase?
@aftereartharcade29 күн бұрын
Hey! i get most my stuff from harbor freight. They are affordable and worked out for me. The extension is the first link and the red breaker bar "extension " is the handle from the jack in the second link. www.harborfreight.com/wobble-socket-extension-set-9-piece-67971.html www.harborfreight.com/automotive/jacks-jack-stands/3-ton-floor-jack-with-rapid-pump-red-56624.html
@cdajit7795Ай бұрын
I have a 2007 Yaris sedan I just replaced both sides of mines , but my driver side is now leaking from that metal line that runs directly into the cylinder, not sure what’s the lines called
@aftereartharcadeАй бұрын
The break like goes into the wheel cylinder. Sometimes if the line is old or you over tighten it can leak. check to makes sure you have a snug connection after its bolted to the drum back plate. Post a video if you want ill try to help.
@MrStevenWalkerАй бұрын
Very cool, I'd like to do this with my s13 sr20❤
@aftereartharcadeАй бұрын
is it a 180sx? love the hatch s chassis! You got this dood :D
@lundyracingАй бұрын
Looking forward to the wiring video!
@aftereartharcadeАй бұрын
Hell ya!!! I'm still working on it. This summer has been brutal, but its more that I got pulled away from this project due to work, and some other personal things, but it should be out before the end of the year. Shooting for sooner rather then later...
@lundyracingАй бұрын
Dude this guide is kickass!
@jenzelkАй бұрын
how good is this opensource ecu, can it run say a honda k24 in a bmw canbus? love the eurobeat!
@aftereartharcadeАй бұрын
Well I can't say how good it is vs other ecus, but you will have options on how you want to run the K24. Depending on how you want to set up the spark and what kind of injectors you are running. This U4AC has 4 channels for spark so you can run each cylinder, but for 6+ you need to set up the spark in pairs. wiki.speeduino.com/en/wiring/Injector_wiring. The big thing here imo is you can us MAP to get your fuel tables and thus adjust for boost levels. A speeduino does the same thing as a megasqurit or something but for less. As for the BMW canbus thing. I'm not exactly sure. From my understanding canbus is a protocol bmw seams to have some of its own other protocols too. medium.com/@chairface/talking-to-your-bmw-tapping-into-a-cars-communication-bus-4adff7ac640d It doesnt seam like the canbus is fully implemented for broadcasting functions for the speeduino yet. So ide image you would need to do some custom things if you are trying to control things over can with this ecu, or if i was you i would join the forums and ask there.
@jenzelkАй бұрын
@@aftereartharcade that wiki link was helpful, it looks like speeduino can work with the analog bmw's before 1999 when they went to canbus system. Thanks bud!
@DTD2212Ай бұрын
I saw Speeduino supports CanBus, and I would like having the option of reading RPM and oil and coolant temp over OBD2. Do you know something about that?
@aftereartharcadeАй бұрын
wiki.speeduino.com/en/CanBus_Support2 Yes it looks like you can.
@AliYmaxАй бұрын
Nice
@MrBlacJack12 ай бұрын
thank youu
@MykeHawke-r9r2 ай бұрын
Wooooot!!
@MykeHawke-r9r2 ай бұрын
Excellent
@dustinadams42522 ай бұрын
I was really close to buying a speeduino but I actually found a guy talking about rusefi and ended up buying a uaEFI board. I wish I could have gotten a dropbear to try out as well.
@bastion88002 ай бұрын
Not sure if you fixed but in my experience, that smoking off the exhaust manifold was caused by a leaky distributor seal. You might have to rebuild the distributor. It's not too bad of a process.
@aftereartharcade2 ай бұрын
Awesome! Ill for sure look at that! Its been difficult to find where that leak is coming from. From what Ive been reading it could also have a leak in the valve train too like the stem seals. Thanks for the comment :D
@DomT03112 ай бұрын
You'd be better off with cubes of dry ice instead of one big chunk. But what do I know, the cubes didn't work for me either lol
@aftereartharcade2 ай бұрын
I did end up breaking the dry ice up when i tried to use in the car. It worked, but it cost a bit and is hard to work with, but its satisfying when you do get pieces off with it.
@fredf17942 ай бұрын
Thanks for the speeduino series! Please keep it going! This is the format I need.... breaking it into chunks.
@aftereartharcade2 ай бұрын
You got it Fred! Thank you for the encouragement! I've been dealing with some personal issues, but we are working on the next few videos still :D
@RockyRoman3 ай бұрын
That squirt tho ;)
@kylocidy33663 ай бұрын
Just got an AW11 two days ago! Looking to run all the basic maintenances on it to get it to a good baseline. This was helpful and shockingly recent. Thanks!
@aftereartharcade3 ай бұрын
Sick, Good luck with yours! AW11s are sweet, glad I could help out!
@GoopRoppongi2 ай бұрын
Yooooo i got mine 3 days agoo
@GoopRoppongi2 ай бұрын
@@aftereartharcade thanks!! glad there's recent stuff on the aw11, imma edit when i finish the oil change
@carterburlison3 ай бұрын
What are the odds that I adapt the speeduino to a school bus diesel
@aftereartharcade3 ай бұрын
I think kind low due to how the diesel engine works. They don't fire injectors or spark the same way. but if you understand how DE work you can probable adapt the code to do it, as it is open source.
@aftereartharcade3 ай бұрын
speeduino.com/forum/viewtopic.php?t=657
@carterburlison3 ай бұрын
@@aftereartharcade super helpful! Thanks man!
@carterburlison3 ай бұрын
Keep going!! Im damn near learning step by step through you
@aftereartharcade3 ай бұрын
Hell ya that is awesome! I appreciate it :D I'm working on the next video in this series, but some life issues have gotten in the way.
@iicordii6483 ай бұрын
For everyone planning to watch, it has loud ass random music. If you have it muted, it’s a helpful video
@aftereartharcade3 ай бұрын
Thanks for the feedback! Kinda reflects my personality people say I'm more helpful when muted tooo... >< Anyways I'm still learning all the yt stuff so i appreciate you telling me the music is to loud.
@thomasjoyce83743 ай бұрын
Dude would you ever get in a discord call and help me get this setup ? I can burn the base tune for some reason . I will literally PayPal you !
@aftereartharcade3 ай бұрын
Yeah we can work something out! I'm still learning myself lol but maybe together we can figure it out! Im wtmk_bk#8448 still working on the After Earth Arcade discord but feel free to message me. Tuesdays would be the best time for me.
@thomasjoyce83743 ай бұрын
@@aftereartharcade sweet man I added you . Much thanks 🙏
@lobotomyy4 ай бұрын
Your „Distributor“ sends out a hall signal, you dont need a vr conditioner. Set jumpers to direct and pull up
@aftereartharcade3 ай бұрын
Hey! Thanks for reaching out and letting me know. I tested with a multi meter and I'm getting some ac voltage when connecting to the 120 degree signal and the negative then rotating. Also it produces a RPM reading in tuner studio. If I remove the VR conditioner then jump direct and pull up as you say I no longer get an RPM reading in tuner studio when rotating. The meter test suggests its a VR and it does work seam to work in the VR configuration and described. I don't doubt that it maybe a hall signal, but why then I'm not getting a RPM reading when setting it up as you specified? What are some other things I can check to verify?
@lundyracingАй бұрын
@@aftereartharcadethe ac detected could possibly be interference? Is your sensor wire shielded?
@aftereartharcadeАй бұрын
@@lundyracing I think you are right that it is interference. i realized that this is an optical sensor... so it really should be hall... that is why lobotomyy was trying to say.
@krashanb57674 ай бұрын
More videos with Speeduino on KZbin. Very nice :P
@thomasjoyce83744 ай бұрын
Are you willing to build a speeduino board for me ? Obviously would pay for raw material and labor !
@aftereartharcade4 ай бұрын
I'm hopeful if you follow the videos you should be able to put one together yourself. I plan to show the full process of hooking it up to our z31. Even if it blows up :p . Sending out assembled speeduinos is a service i could provide, but to hook it up the the car you would need to do your own wiring or we would have to put a harness together for you. That could be expansive :< but what engine are you running?
@thomasjoyce83743 ай бұрын
Ka24de ! And I bought the exact parts as you . Having issues with tuner studio.
@aftereartharcade3 ай бұрын
@@thomasjoyce8374 Oh sick! Did you install the firmware with speedy loader? If so what issue do you have with tuner studio? Do you know what injector and ignition set up you are running?
@thomasjoyce83743 ай бұрын
@@aftereartharcade I followed the video step by step (amazing video btw) I wrote down the error code it was throwing , something with the imi I think. And I downloaded the most current version with speedy loader . I'll add you on discord sometime soon
@weavermarkel25174 ай бұрын
Nice vids! FYI the Arduinos on the WTMtronics site have the Atmel based 16u2 serial chip. The pic is old, you can't even buy those particular units from robotdyn anymore, and it was not a CH340, but another vendor's IC.
@aftereartharcade4 ай бұрын
Thanks for the info! :D The one i bought from WTMtronics was a CH340 but that was late last year.
@802Garage4 ай бұрын
My AW11 is currently sitting, but it's the project I want to work on most. Going to be SR20 swapped, turbocharged, and mostly stock appearance outside. Lots of 3D printing will be involved too.
@aftereartharcade4 ай бұрын
Hell ya! That thing is going to sound sick!!! What transmission are you using? AW11s are so coool
@802Garage4 ай бұрын
@@aftereartharcade LSD 5 speed from a Sentra. :) I've figured out how to adapt the axles/hubs with off the shelf components, I believe. Still need to actually mount everything and all. Just have other projects to finish first. Down the road I may try to import an X-Trail VET engine, but that's way in the future.
@802Garage4 ай бұрын
I think we are the same brand of ADHD hahaha.
@aftereartharcade4 ай бұрын
Glad to find someone who can relate :p
@martin86134 ай бұрын
I named mine Yesenia or Yesi the Yaris
@aftereartharcade4 ай бұрын
I like that name very cute :D Fitting of this car. Idk people like to talk smack about the Yaris, but its a very dependable car and i think the hatch looks cool. (The sedan is cool too lol) Ours is DD or delivery driver :p . But im thinking about changing the name to Yaurirtle and seeing if we can make it look like a Squirtle lol
@martin86134 ай бұрын
How many miles on yours? I just bought an 07 sedan with 217k and she's running like a champ
@aftereartharcade4 ай бұрын
We are at 201k right now! Hell ya the 1nz is really good. If its not burning oil it was taken good care of. I use Chemtool b12 every other oil change.
@neetASMRch4 ай бұрын
Your production value is always rising bro. Love seeing your progress. Hope you get coilovers! Though for an 80s car, i imagine itd be pretty hard to find an economical option for daily driving purposes.
@aftereartharcade4 ай бұрын
Appreciate you Neet! Im trying to level up!! Megan has the most economical, but lots of good reviews on the BC and they are just a bit more. I decided to go with KYC struts they are $60 and OEM like. Getting the car back on the road is my first goal. Ill probably upgrade to the ground control lowering spring kit in the future.
@Plons0Nard4 ай бұрын
Expansive ? I think you mean expensive
@aftereartharcade4 ай бұрын
That is the one! --$ :D
@maxel0225 ай бұрын
Bruh, WD-40 is a lubricant, a big NO in breaks world. You need a break cleaner and only break cleaner to remove the grease and oils which come from factory to protect rusting of the discs (rotors) on the shelf. Also, you need to address that torn rubber asap, as soon as you get dirt and water in those joints, they will behave like sanding paper inside of them, completely destroying those CV joints.
@aftereartharcade5 ай бұрын
Thanks for the information! That is kind of why i did it to see if others thought it was bad idea. We use to use wd-40 for everything, but you are correct. DON'T USE wd-40 live an learn (i did say don't quote me rofl). I was out of break cleaner. Ill go get some and and use break cleaner. I ordered a new axle and it'll be in before I drive it anywhere.
@aftereartharcade5 ай бұрын
wd40.com.au/uses/whats-the-best-way-to-clean-brake-rotors#:~:text=Can%20You%20Use%20WD%2D40,No. Also the web sight says you can so idk, but ill use break cleaner anyway
@aftereartharcade5 ай бұрын
🍋 +❤🔥 =🍻🥳
@koopathegoblintroopa50035 ай бұрын
you should have called me. I would've come to help ya. Glad you're okay though.
@aftereartharcade5 ай бұрын
Haha thanks Koopa! I'm glad i have friends like you :D I think i enjoy the chaos. If it got to unmanageable i would have.
@LOKISX5 ай бұрын
Long live Eurobeat :D
@aftereartharcade5 ай бұрын
at least you get it! 👊😁 and the music you use is always so good! just say'n lol
@LOKISX5 ай бұрын
@@aftereartharcade 😊🙇♀️ thanks alot.
@CodeAsm5 ай бұрын
Now i need a car to play with :D
@jake_bytheocean5 ай бұрын
does it fit my honda
@aftereartharcade5 ай бұрын
Yes! The U4 can run up to 8 cylinders. They also make a plug and play called a dropbear. speeduino.com/shop/home/38-speeduino-dropbear.html
@ultimabear5 ай бұрын
I wanted to watch and learn from this but the disco and glitching was too much to bear. Sorry.
@aftereartharcade5 ай бұрын
Thanks for the feedback. I love euro beat so it was surprising to me so many people didn't like the music. I get it though to each there own. Being fun and informative is my goal so im sad my style prevented you from learning. To break it down in text. I got my components from wtmtronics. You will need a speeduino, and Arduino with a 16u interface, a if you dont get a U4C speeduino you need a stepper driver for the tps, and if you dont have HAL crank and cam signals youll have VR ones so you need a 2 channel VR conditioner. speeduino.com/home/ wtmtronics.com/ This is the relivent info in the vidoe.
@MrKaleidoscope5 ай бұрын
I like your videos vibes
@aftereartharcade5 ай бұрын
Thank you!! Appreciate the support 👊
@lordmemester87985 ай бұрын
I have to say, interrupting yourself with music to freeze frame and circle something is really funny. Please keep doing it!
@Wtfinc5 ай бұрын
Bro, i was so put off by this that i was like wtf is an ecu¿ I’m a whole mechanic. U just don’t expect an arduino to be an ecu. What even funny is I thought about doing this once and still didn’t make the connection. Very cool
@vaporizer825 ай бұрын
Microsquirt’s been doing it this way for years.
@MikeHarris19845 ай бұрын
that music was horrible and speed thru the end. I would have like to see a walk through of the board and items not just an unbox and "here it is" video. would have like to see it put together, and running an engine and how to set it up.
@aftereartharcade5 ай бұрын
Thanks for your feedback. I'm creating this series to do just that. This was the second video of what parts you will need, and the parts i got to give people and understanding of what they will need to get started. In the next video we will assemble the ECU. The goal will be to go over each component, and how to wire it. We will be running a v6 vg30det, from a Z31. This is a long form project and doing it in small chuks makes it more manageable for me. I understand that waiting and short, component baised maybe not what you are looking for, but once the series is completed I feel it will be easier to watch in chucks and people can skip to the part of the process they want to see. My biggest goal here is to just get the word out more about the Speeduino. Again your feedback is much appreciated. Maybe my future videos will be more what you are after.