que feo quedo eso

porter cable still exists it is in tsc know

I built an E300 with a 24v 500w currie motor and added a 36v 1000w controller the a 36v 14ah lithium, 25-27mph.

Suggest people watch the Project Farm video on off-brand tool batteries to get an idea of what some of the variables are...one critical test was short circuit testing...he found batteries that had no short circuit protection and were obviously pretty dangerous to keep in your shop.

thanks for pointing out that frustrating fact and doing it as most of us would have to..

I go by weight in grams of the battery. My question posed to Biswaye is Why does my real LBXR20 Black and Decker 20V 1.5 Amp hour battery weigh 357.4 grams versus the Biswaye 4.0 Amp hour 20V battery LBXR20 that weighs only 341.3 Grams???? I sense a scam here More Amp hours always amounts to more weight just like the 18650, 3.7V Lithium battery cells used in old laptops the weight in grams means everything !!! I studied this as an Electromechanical Engineering Technologist for the Motion Picture Industry for 20 years. Something is wrong !!!

Where can we get that battery and charger?

Did this ever get resolved for you? Am thinking about getting their service, but not if they're sstill having these sorts of issues.

thanks for sharing! You should be able to tackle any hill with that ratio and motor!From my research we need to over volt the motor if we desire a higher top speed without difficult mods of the sprockets... In many states, 20mph is the top allowed speed for our e-scooters so it's a reasonable and safe target mph. Take care

10 minutes to put this together? Took me over an hour 😭

almost cried when i was headed through a 29" door, realized I forgot to measure before buying... slipped right through, with door all the way open @ 180 degrees. get the flat free tires.

did you break the 15 mph barrier in successive high speed passes

had been using this bench grinder for about two weeks. The motor gets hot really fast. Home use ok. Not for commercial use.

0:34 It's called inflation, thank Biden

What's the slot in the left side for on the base

Well there 25mins never get back...

Instructions state to use a pistol grip with the single pin pick.....

After I turned mine off, the two wheels kept rotating for two minutes and fifteen seconds. I had it turned on at its maximum speed (3,400 r.p.m.). This was right after I bought it, and ran it for the first or maybe second time.

Looks like you didn't dress the wheels which could be the reason you are getting a bit of vibration and the spark when you shut off.

I wanted to buy one of these but it's so expensive

any update on this build, wondering how it performs and how much it cost the whole build.

Like the entire did do but welding it to the frame was not helpful as you said 95% of people do not have welders.

part 2???

Drink a red bull

Where do you demonstrate the horn?

estimated cost for all of this?

thanks

When we first got Mofi we were delighted and purchased second one and disconnected from a hard line. we use it for our home in 32327 and the second on our boat in Maine and Florida. Since they sent new chips a few months ago and "new improved service" it has been unacceptable. My wife has spent hours on the phone with customer support and eventually even sent a new SIM card. It tripled the slow speed for a few hours, then back to the very slow speed. We are very frustrated . Now we are stuck with two Mofis and unacceptable and expensive service. Beware UbiFis claims - and don't get locked in!

wow. Just.... o_0 I have a stebel nautilus, thats crafty!

I had Ubifi for 4 years and they where the best until the same problems you are having. I loved Ubifi they suck.

Just bought one... loved it! Better than a wheelbarrow.

Blower pipe outside, birds Nesting yet?

I just put mine together today. I had no issues with the build. My only complaint is the MDF board. The edges of the MDF board used for the drawers are completely exposed. If any kind of moisture ever gets in there it'll be ruined. I'm considering applying birch veneer to give it a layer of protection. I'm also swapping out the rails for the drawers with beefier ones that allow the drawers to come out further. Overall, happy with the purchase and I highly recommend it to anyone looking for a decent workbench.

It's compact, but I'm having a hard time picking with it due to the length of the picks and when i pick a lock (even with wave rake) the metal to finger pushing is really a pain, even afterwards my skin is red. No good way to hold them, even with the lockpicks tightened to the maximum. Would not recommend (at least for beginners), just get a pick set with longer picks and a good handle.

You nee to rotate the picks further so you are holding the body like a pistol grip.

I'm going to try this weekend

Very good product

I appreciated your video. I've been thinking about purchasing this exact workbench.

There's a fourth measuring option, the shoulder step.

Having the fractions on the dial, is handy for wood botherers.

For $100 you'd think they could at least have put it together and none of the picks in mine seem to work. The knife and combs didn't do anything with any locks that I tried. Looking at a see through clear plastic lock, the comb teeth seem to be too short to push the pins up far enough to clear the cylinder and the rakes can't even open a Master lock that opens easily with one from a cheap Chinese set! I wouldn't recommend this to anyone!

Ubifi is horrible now. Service sucks. Do not use under ANY circumstance

You should check out the Swick. It’s now my go to picks.

If you have complaints about the tools sitting loosely you can just tighten the screws on either side to make them stiffer

I am planning on going to Verizon business plan $99, hope it works better

What’s the spacing on the mounting holes?

The plastic above the hole your running the wires through on the battery box is a access panel just pull it up and u don't have to depin connectors unless ur changing where they are in the clip

It’s the gift that keeps on giving…my noisy neighbors are gonna love it! 😉🤣😂

I’ve had one for 6 months now. The quality of the picks are exceptional. The size is smaller than the keys I have to carry for work and slightly smaller in all dimensions of the “Wave” leatherman tool that also lives in my pocket. Best to worst: The 2 picks are excellent and the learning curve with using them wasn’t terrible. Rakes were very similar to the ones I gravitate to anyway. Door bypass tools probably the most used tool I’ve used yet. Simple and well built. The expansion pack top of key way tension tools very clever design, excellent to use top or bottom of key way. Jigglers , just average quality, some seem pointless for me to have, slightly more flexible than I like. Wafer picks same excellent quality as the first picks never used them. Knife hard to use in this configuration Shim and lock decoder could be better steel Yale bypass tool, haven’t used Combs good quality managed to get caught in every lock I’ve tried using them in. Had to cut lock apart to get them out whole. Washers... not enough of them after 3 months in my pocket tools flop around Handle tools don’t lock at 90 deg or at 180 open leaving tools feeling too short to be very effective in most conditions. It would be nice if the offered “blanks” to make our own favorite and or custom picks. A dimple pick and a cam lock to keep tools from turning in your hand would also be nice.

Thanks for the review......fair and unbiased!!!!