Nice I love mine best deal in budget 18 scale crawlers I've seen Try running without the rear spare onboard it adds weight to the rear and takes weight off the front axle i see your front tires spinning a lot I use cheap steel tire weight on the inside wheel wells to get some great traction from the front axle
@DC-RC1810 сағат бұрын
You are right on the ball! This thing has been heavy in the back since I got it. I haven't used it in a while, but I'm going to be putting some weight into the front end as you suggested. Appreciate the comment!
@clsuxx67058 сағат бұрын
@@DC-RC18 The weights I used were from CKAuto you can get them the usual places I went with the black ones in 1oz they also come in 1/2 oz and 1/4 oz Nice black finish with high quality 2 sided tape already installed just peel and stick They work well on my 24th scale up to my 10th scale I think 1 box did 15 trucks
@jwdjpajtgjm6 күн бұрын
cool LiftLUX differential gear box so real
@NORTHERN.MICHIGAN8 күн бұрын
A+ on the visuals, I HAVE THIS TRUCK, IT DESPERATELY NEEDS SOME WORK, REALY LIKE YOURS, IM USING THIS VIDIO, FOR TECHNICAL SUPPORT THANKS..
@DC-RC187 күн бұрын
Very nice of you to say, thank you so much for watching and comments!
@aces62629 күн бұрын
Nice garage man, that is beautiful
@aces62629 күн бұрын
Why not double tires for the rear and middle axles? Also, I'm pretty sure you got an older version of the B16 there, WPL own website says the all of the B-series should have the BC receiver by now, only the C54-1, C24 and C14 doesn't have them. The BC transmitter has two extra toggle button each for throttle and steering, four extra slots of JST PH2.0 for reverse, brake, left and right signal and it has slightly better modulation too. What a bummer. Other than that, I like the ladder on the driver side and weathering! Looks great!
@MysticRiverRC10 күн бұрын
Very nice Jeep crawl!
@DC-RC1810 күн бұрын
Thank you very much!
@567549211 күн бұрын
Nice run ! I love the MN128 hope to get one eventually .
@DC-RC1811 күн бұрын
Thanks so much! I am really happy with it.
@567549215 күн бұрын
Sweet - and thanks for the links ! I've got one on the way from Ali-not-so-Express ( lol ) .
@jacobcarter918916 күн бұрын
i have this truck and i'm going to put leaf springs on it
@DC-RC189 күн бұрын
That will be really cool. I have leaf springs on my MN 82, and also on my WPL Suzuki Jimny. The only problem with the Jimny though is that I changed out the axles, and when I put them back on, the rear stays up until you put pressure on it then it just drops and doesn't pop back up. I put a metal roof rack on it, but there isn't enough weight on there for the leaf springs to not pop up at all. I've looked at pictures and I appear to have them back on correctly. I even ordered the stiffer, or thicker leaf springs from WPL, and nothing helps. I'm now thinking of putting the springs back on the rear, but also throwing some shocks,
@MysticRiverRC18 күн бұрын
The Uni looks great! And that garage is pretty cool too! I subbed for more! Cheers!
@DC-RC1810 күн бұрын
@@MysticRiverRC Appreciate the kind words! I am subbed as well!
@kevincasey687619 күн бұрын
Nice rig . I have the FMS Toyota Hilux . I installed bearings in the axles and a Injora 050 motor . Made a huge difference.
@DC-RC1819 күн бұрын
Thank you! Appreciate the tip, I will more than likely do the same.
@kevincasey687619 күн бұрын
Looking good ! When do we get to see it run ?
@DC-RC1819 күн бұрын
Soon, we have been having some rain here but I will heading out soon! Appreciate the interest!
@ruflasto123 күн бұрын
Another Sweet Build my Rc friend. Keep up the good work. 👍👌
@DC-RC1823 күн бұрын
Thank you for the kind words again!
@ruflasto123 күн бұрын
Nice set up. On my one i have all the metal parts fitted. And up graded the esc to a 1080 Hobby wing quick run. Woks well. But i love what you have done to yours. Big thumbs up. And i have just subscribed as well.👍💯
@DC-RC1823 күн бұрын
I actually ended up ordering the metal axles and driveshafts. But I only received the front driveshaft, so I'm waiting for the rear to arrive. Decided to upgrade with metal despite what I said in the first video. Reason behind that, is I updated my WPL Jimny, and the axles and gears are fantastic. So decided to go metal on the MN.
@ruflasto123 күн бұрын
@@DC-RC18 Nice one. With your set up it will work well. More low down weight will make it more stable.
@kevincasey687625 күн бұрын
The bumper flip will kill up hill climbing ability. The best way to close the gap between the bumper and body would be to relocate the battery to the ESC tray and lower the front body mount . Remove the existing battery tray and mount the ESC between the rear frame rails . The battery in the front makes for better weight distribution.
@DC-RC1822 күн бұрын
Appreciate the tip. I just did it for cosmetic reasons, but haven't seen a change in climbing ability.
@AAMIRRCCRAWLER28 күн бұрын
My Favourite RC Base On Toyota Hilux ❤Wpl C64-1
@AAMIRRCCRAWLER28 күн бұрын
So Beautiful, Muscular RC. What A Winch 😊
@ungurdani8346Ай бұрын
Salut my friend super car ... super video subscribe subscribe
@DC-RC18Ай бұрын
Thank you! I subscribed and will check out your channel, saw a few buses!
@fpvMazerolle2607Ай бұрын
All I did was metal drive shaft and 87turn motor it's awesome I have c64 on the way
@uwek113Ай бұрын
a very good, a great Video,👌🏻 what kind of sound module is this?
@DC-RC18Ай бұрын
Thanks for the kind words, it is the Sense ESS Dual +......the one with two speakers.
@Fortes_RC_AdvАй бұрын
I love this little VW👌😉❤️🔥
@DC-RC18Ай бұрын
Me as well, just finished painting it so I will do a quick video when I put it back together......thanks for the comment
@peterali2127Ай бұрын
👍👍👍💯💯💯✅✅✅🔥🔥🔥awesome
@NWrcadventuresАй бұрын
Nice work brother its looking great love the mn82 i have the red one as well i do dig the shiny red paint on it ive also done a few vids on it and the latest upgrades i did to it good job man !!
@DC-RC18Ай бұрын
Appreciate the kind words! And I know your videos well, I have watched many of them for months now, especially the ones on this model and what you did for tires. Thanks again!
@NWrcadventuresАй бұрын
@@DC-RC18 yes those dj crawlers made a big difference in the driving and trailing duties also great for rock crawling and they are so soft and maluable that they worked great in this setup 🤟 and definitely gave it a much better look the new fms setup i put in it is amazing it changed this rig completely!!
@DC-RC18Ай бұрын
@@NWrcadventuresHey, hope you are doing well. Seeing as you got me onto MN, thought I would let you know that I just ordered the MN128. I ordered the black version with the cage doors. Has to be one of the best RC's I have seen. Assume you have seen it, but if not, you should check it out! Take care.
@NWrcadventuresАй бұрын
@@DC-RC18 thanks brother much appreciated ill look into it in a lil while i might of seen it but i just don't remember all those mn numbers but ill give a check thanks brother fyi you should buy one of those fcx24 land rovers their sweet o ordered the dicovery and the range rover im very excited about this but ill have to wait till july 7 th when they start shipping them to everyone thats not a nig channel like me and everyone else who ordered them or one of em
@peterali21272 ай бұрын
👍👍👍✅✅✅💯💯💯🔥🔥🔥awesome
@DC-RC182 ай бұрын
Thank you very much! Just subscribed back!
@ruflasto123 күн бұрын
Thank you.👍
@PassionHobbyRC2 ай бұрын
very good👍
@DC-RC182 ай бұрын
Thank you very much
@rcworldKenya2 ай бұрын
Just subscribed and I love the video. Truck looks super👍