lol worked perfectly good for me. I actually followed the instructions on the labeling…
@thee_alchemist16 күн бұрын
thanks bro i heard rit dye was good for carpets, i was just making sure and i appreciate this vid saved me time and money 🤞🏽💯
@mkfourgli978517 күн бұрын
Hey great results, how has it held up so far
@APNFORD25 күн бұрын
Nice ramps, ever consider drilling a bunch of big holes in them to lighten them up?
@zackellis2325 күн бұрын
I have! Just haven't had the time. The only concern would be is it worth doing all that work to save 5Lbs. lol Id have to actually calculate the weight savings.
@winstonlu7655Ай бұрын
can i ship my e30 and help me repair rust too ?
@ceasergert2780Ай бұрын
I just watched this went to Walmart got right stuff for 4.78. Went home boiled water added a pinch of soap and dye did carpet for my car hung it to dry for a day It is perfect
@zackellis23Ай бұрын
@@ceasergert2780 hell yeah! I’m happy I saved at least one person a huge headache lol
@usapaw5700Ай бұрын
Do not cut off the surge protector!
@zackellis23Ай бұрын
@@usapaw5700 if the surge protector goes bad, how would you replace it without cutting it off?
@peterdejoseph5197Ай бұрын
It would have been cheaper to get replacement carper at 12-15$ a can and labor. I did a car carpet just like you and at the end paint coat about 150$ and my labor it would have been cheaper for my client and less trouble for me
@alexfuentes3468Ай бұрын
I do not recommend messing with the camber and no toe adjustment. The tq steer is more noticeable because you messed up the alignment worse than it already was. If the wheel is crooked, the alignment is off.
@zackellis23Ай бұрын
@@alexfuentes3468 I get a track alignment before each season, some times twice a season. But my car also makes close to stock power so the torque steer is very manageable lol but you’re right
@travisgismeАй бұрын
I have the same muffler on my focus st with catless dp and full 3 inch exhaust. Pretty much got rid of the rasp, sounds tame till I get on it
@zackellis23Ай бұрын
exactly! im not a fan of the rasp
@ComestomindАй бұрын
good video, was worth the watch. Question....What's the lo-down on those lifts that the car is on? Make those? or did you buy them?
@zackellis23Ай бұрын
@@Comestomind thanks man! They’re made by Quickjacks. They’re like $1500 to $2500online. You can probably find a used set. Just know they have different models for different size/weight cars.
@wrxnfx127Ай бұрын
Dude you gave me confidence with this welding stuff 👍🏾
@zackellis23Ай бұрын
@@wrxnfx127 hell yeah! I’m happy to hear it! Good luck with your project.
@adamajoubАй бұрын
Hey bro I’m a handyman here in Las Vegas and do need things welded from time to time if you’re interested in small side jobs here and there.
@adamajoubАй бұрын
Hey bro I’m a handyman here in Las Vegas and do need things welded from time to time if you’re interested in small side jobs here and there.
@tannerlittle2606Ай бұрын
A shop told me today my water pump is going out... My car has been through a lot and had coolsnt coming out of two lines by the oil filter place and i sent it to a shop anf they told me the water pump is foing out vut i dont hear screeching, see an active leak near the water pump but thet said its coming through a weep hole in it and i know whwt that is but how can you evem tell without removing the side of everything to see the water pump?
@zackellis23Ай бұрын
@@tannerlittle2606 it sounds like the oil cooler (which is the Finned thing the oil filter attaches to) might be leaking. A lot of people delete the oil cooler for that reason.
@tannerlittle2606Ай бұрын
@@zackellis23 it was some of the lines I got the lines replaced but I didn't know you could delete it???
@tannerlittle2606Ай бұрын
@@zackellis23the water pump started to whine today 😢
@edgarulisesferiarodriguez8379Ай бұрын
The correct product to dye a carpet is RIT Synthetic. This is the one to dye polyester, nylon, and acrylic. Additionally, it requires at least four paint coats to recover the same color; you are changing the color, so it needs more paint coats.
@JVM-x9iАй бұрын
I got to tell you I found you while I was looking for replacement pans for my BMW not that I could put them in myself and I saw how easy you make it look to get it done. I’d really like to have mine done, but I’m sure it’s pretty expensive and time consuming. You did a fantastic job. I really admire your work and craftsmanship. John M.
@zackellis23Ай бұрын
@@JVM-x9i I really appreciate the kind words! The project was more than I expected it to be I knew if I took my time it would come out great.
@eastonleckie33102 ай бұрын
Hey man just bought my dream car a 1990 E30 this weekend has the same issue with the rotten floor pans was wondering if you could point me in the right direction for getting the floor panels you have thanks :)
@zackellis23Ай бұрын
@@eastonleckie3310 nice! Congrats. I got my floor pans at Valcas Garage. www.valcasgarage.com/product/e30-front-right-side-repair-floor-panel-prof/
@eastonleckie3310Ай бұрын
@@zackellis23 thanks for the fast reply coming across your channel was like finding a hidden gem!
@zackellis23Ай бұрын
@@eastonleckie3310 hahah it’s no problem! I’m happy I could help.
@Sayu2x2 ай бұрын
I want one
@zackellis23Ай бұрын
@@Sayu2x they’re for sale all over.
@jcdebbs2 ай бұрын
Your video randomly popped up and as a Vegas local, I had to watch. Fellow car enthusiast as well. I sold my ss several years ago prior to moving here so I personally haven't discovered many roads to take a nice drive. I do recommend the drive up to Mt Charleston, it's a nice view up there and a slight change in scenery from the desert landscape. Also, be careful when you drive through Boulder hwy, the cops are always pulling drivers over for speeding, lol. Currently car shopping for another sports car so I can finally explore the backroads out here.
@zackellis232 ай бұрын
I appreciate the boulder hey advise. I guess I'll slow down lol. Everyone drives SO SLOW... it's unreal. But I have been to Mt Charleston once in my truck. I do plan on taking my car soon. What kind of car are you shopping for?
@mattsmith27512 ай бұрын
Always nice to see different views especially in the neon loving it brotha sounds amazing as always 👌🏽
@zackellis232 ай бұрын
aint that the truth! and I appreciate it brother. I hope you're enjoying yours.
@laloow58392 ай бұрын
The sound is beauty men....SHAAAW
@zackellis232 ай бұрын
@@laloow5839 it is for sure!
@landonmccollum19292 ай бұрын
Liking the SRT content. Yeah once or twice a year when we go out west to Cali it's nice to ride around because you can actually see the terrain of the mountains and hills without all the greenery like we have here in the southeast. Don't get me wrong, I like the trees and all, but enjoy the change in scenery.
@zackellis232 ай бұрын
@@landonmccollum1929 I appreciate it! And yea coming from the north east we have tons of greenery but the south west is just a nice change.
@AceSRT2 ай бұрын
You know it's a good day when another SRT-4 POV video comes out. Also, is that an older HKS SSQV? I used to have an older one that sounded like that until I upgraded to the SSQV4.
@zackellis232 ай бұрын
Damn right! And I actually made a BOV block off plate so im running no BOV.
@jimmyheavlow95412 ай бұрын
Just watched the whole video. Man those desert views look incredible. Hope you and your family are doing well! Congrats on the little one 👏
@zackellis232 ай бұрын
Thanks brother! The views are crazy for sure. Congrats on your little one too!
@kennethboydsr39662 ай бұрын
Thanks for the information😊
@e1casper2 ай бұрын
Looks like no one installed garage door stop on your door. I would try that it nails on the outside of the door and seals that gap by way of a piece of flexible vinyl
@zackellis232 ай бұрын
@@e1casper damn I’m 100% gonna look into that. I appreciate it!
@docyt2 ай бұрын
I did something similar in South Tennessee and saw that my electric bill went up by almost 50%. What is your electric bill like after running this 24/7?
@zackellis232 ай бұрын
@@docyt idk yet it haven’t had it for more than a week. I hope it’s not 50% higher though lol it says it cost .60 a day to run or something like that. Not that that’s accurate but still
@jasunto2 ай бұрын
I am thinking about doing this and have decided to vent the exhaust up to the attic. Just going to mount the exhaust hose to the sheet of drywall that covers the attic opening and cut a hole in it. Going to see if i can make a quick disconnect for it and a cover to block it off when not using.
@zackellis232 ай бұрын
@@jasunto that’s going to be the best and easiest option by a long shot. I don’t have an attic above mine so that’s a no go unfortunately lol
@Iflyfpv760Ай бұрын
How’s it working?
@zackellis23Ай бұрын
@@Iflyfpv760 it works good. When it’s 110+ out the garage stays around 83-85 degrees
@bobbys21602 ай бұрын
A swamp cooler portable ac type works well in low humdity
@zackellis232 ай бұрын
@@bobbys2160 that’s what I’ve heard. This was on sale so it was the cheaper option lol
@vbar66l932 ай бұрын
Doesn’t your garage have 1 or 2 vents on the side wall venting to the outside. I live in Vegas and I thought all garages had to have these vents. If so I’d cut a hole through that vent for your hose. When you’re not using the AC, just cover the space with a piece of ply wood or screen.
@zackellis232 ай бұрын
Mine does not have a vent. Im 100% sure about that. Maybe it's because my house in brand new? Idk lol its my first time living not in the north east.
@Rcmiller2 ай бұрын
Think about buying sheets of insulation foam to insulate the door, there is a lot of radiant heat from the door
@zackellis232 ай бұрын
@@Rcmiller the door is factory insulated. It actually does a great job of keeping heat out. It’s cool to the touch when it’s 100 out
@EnviedKing2 ай бұрын
I tried this with my portable ac unit and it will not blow cold in the garage. Soon as I bring it inside the house it starts blowing cold again. Not sure if its because it has some temp switch thats not allowing it to turn on the compressor because its too hot or not
@zackellis232 ай бұрын
If you're restricting the flow of the exhaust just a little too much that will happen. It did the same thing to me initially.
@ericw93732 ай бұрын
I did this a month or two ago on a whim to see if it would work. I had a portable sitting around. I used a dryer vent in my garage to exhaust the hot air.
@zackellis232 ай бұрын
That's what I need but I cant drill a hole in the house lol. Im going to try and make something to help distribute the air more effectively.
@pdmark3112 ай бұрын
Insulating your garage door might help more than anything.
@zackellis232 ай бұрын
@@pdmark311 the door is already insulated. It actually does a great job at keeping the heat out.
@pdmark3112 ай бұрын
Two things. Get a 12-16inch vent duct to adapt the AC hose. Second get a 4x4 or 2 as the base you're door is resting on.
@zackellis232 ай бұрын
@@pdmark311 so I have planned on running the 2x4 method but haven’t had time to do it lol. And yea the exhaust does need to be made longer and a little more effective. I’m also planning on insulating the hose because it gets crazy hot.
@bakerman22222 ай бұрын
How well does the exhaust work since you have it smashed down a little? I've been thinking about doing this myself.
@zackellis232 ай бұрын
@@bakerman2222 it works perfectly as long as you seal the rest of the door and don’t squish it too much. I closed the door too much one time and the AC unit just stops blowing cold air. I do plan on trying to make something to go from The round tube to a long flat one but that will be an “eventually” project.
@l1f07bscs00352 ай бұрын
@@zackellis23I had a 4x8 lumbar with a 3 inch vent cap in it . Duct 6 inch to 3 inch convert . You can wrap the lumber with a cheap Amazon garage under door seal and boom semi permanent solution. It's portable , the door travel might need adjustment
@zackellis232 ай бұрын
@@l1f07bscs0035 that’s was my exact plan just havent had time to make it happen. I was thinking of just pulling the door release cord so the door just rests on the wood. Idk yet though
@moparmadness82372 ай бұрын
What happened to the colorado?
@zackellis232 ай бұрын
@@moparmadness8237 I sold it for the 2023 Sierra Duramax for towing.
@Ahmad-vy8zz2 ай бұрын
You hundred percent right I don’t recommend this product I wish I watched your video before I used it.
@zackellis232 ай бұрын
I will say though people were roasting me in the comments because I did it wrong lol
@sadasivamgowtham2 ай бұрын
Hey Zack… good to see you … I can feel the enjoyment that you guys had from this video … stay happy buddy my regards to Jr….
@zackellis232 ай бұрын
@@sadasivamgowtham hey, thank you so much! The family says hello.
@MrJuandiaz072 ай бұрын
For muffler sound, skip to 16:35
@DEATHWISHVQ3 ай бұрын
It amazes me how people don’t read the goddamn instructions. Anything people see in a bottle they assume it’s just gonna come out and do magic.
@zackellis233 ай бұрын
I agree, people are so stupid sometimes.
@Taino5.03 ай бұрын
Griot garage
@random_dad993 ай бұрын
Wonder if I’ll see the srt around cause the only one I’ve seen around is mine 😎
@zackellis233 ай бұрын
@@random_dad99 you in Vegas?
@mattsmith27513 ай бұрын
We have the same one here at work and we love it !! Good choice !!
@zackellis233 ай бұрын
@@mattsmith2751 I’m happy to hear that! I’ve only used it once at this point lol
@1magnit3 ай бұрын
Dumbest idea ever.
@zackellis233 ай бұрын
Are you talking about the SRT4 specifically or in general?
@zoom6023 ай бұрын
The plastic plug on the AFM where the idle screw is missing. This is set from factory and should not be adjusted. Luckily the factory depth is stamped right next to the hole and you can set it back to factory by measuring with a digital caliper. You'll also want to do a smoke test to find and solve for vacuum leaks.
@zackellis233 ай бұрын
I didn't realize it was missing the screw lol and I did the smoke test a video or two after this one. My leak was the valve cover. it was a huge leak. And I replaced the AFM with a used one and that fixed it.... Luckily I got a used AFM for $5 lol
@vicentegalvez14443 ай бұрын
Thanks man for this great video ! My alternator just died, I'm not looking forward to removing the valve cover, but I don't wanna drop $500 at the sho0
@zackellis233 ай бұрын
damn.. $500 is crazy! hopefully it all goes smooth for you