Pontiac Lemans 64' uno de los autos más lindos del mundo púes tiene él diseño completo de lo que deve tener un auto , Diseño, belleza, calidad, cien por ciento diseño. . Felicidades. .....
@bandittweintraub4 күн бұрын
@4:22 he starts work on replacing the o2 sensor
@bandittweintraub4 күн бұрын
getting P0430 on mine.
@Armayettii8 күн бұрын
Why’d you have to add transmission fluid
@eduardoarevalo464322 күн бұрын
I laughed so hard at the found 10 mm socket joke!!
@GreaseAndGlasspacks26 күн бұрын
Th350 swap was a gamechanger on mine. Still no racecar but i can at least merge onto the highway 😂
@norencenelson811128 күн бұрын
On January 21, 1953, My family and I watched as President and Mrs Truman rode home from the Missouri Pacific depot in Independence, Missouri. President Eisenhower was sworn in the day before in Washington. The Buick they were in belonged to Mayor Robert P. Weatherford. It was a Buick Special that came with the last straight eight in production.
@deakin288028 күн бұрын
rubber fuel hose to the carb is bad booboo.. steel or aluminum
@MaxAC28 күн бұрын
@@deakin2880 good looking out. Cheers!
@neighborhudsnipr9626Ай бұрын
I replaced all rockers an push rods still makes the tick cams looked fine 😢
@MaxACАй бұрын
Possibly an exhaust leak. Does it go away once the engine warms up?
@cesargarcia8658Ай бұрын
Will fit a 2012 silverado
@MaxACАй бұрын
Good to know.
@StepUrFreshUpАй бұрын
I appreciate you about to change on my SRT 8 they quoted me 1500 for new fan assembly and radiator... my fan blades sheered off and went rough my radiator
@CoolBlue87GTАй бұрын
When you press the brake pedal, there is a lever on the "dash" near the blade lever, you simply push that small lever up, that will lock the brake, so you can start it w/o having to hold the brake pedal with your hand. Your deck spindles are trashed, when you heard the grinding noise when you moved them by hand, you can replace both of them for about 40 bucks. New ones are so quiet, you would be surprised.
@MaxACАй бұрын
@@CoolBlue87GT Thank you. I figured the spindles were no good but I will let the next guy worry about it. Cheers!
@michaelfleming40Ай бұрын
I bet that mower cost around $35.00 brand new in the 1960s. 😊❤
@jsnt612Ай бұрын
Ever have problems with the auto zone water pump making whining noise couple.days later ?
@MaxACАй бұрын
@@jsnt612 no it never made a noise afterwards
@Nick-kq9wt2 ай бұрын
I went to a mechanic about year ago and he said the blend door actuator was stuck in the open position and my AC fuse was melting. However, I have never heard any clicking. Does the actuator have to click if it’s broken?
@MaxAC2 ай бұрын
I would think if it is stuck then you would want to take the actuator off and move it by hand to pinpoint the problem
@bobolsen79212 ай бұрын
laught my ass off at your workbench. i was invisioning the chair slipping. great vid ...thunbs up
@MaxAC2 ай бұрын
It was a tense few moments for sure. Lol Thanks.
@Failure_Is_An_Option2 ай бұрын
Absolute clown. There is a park lever... but ignore that. Then the educated among us drop the deck on the ground BEFORE yanking pins.
@MaxAC2 ай бұрын
@@Failure_Is_An_Option park lever doesn't release a belt thats rusted to the pulley. I guess you missed that part. You should watch it again.
@markwagner92 ай бұрын
lol
@handdtrufan69272 ай бұрын
Just watched your video. I have to tell you. I'm building my Grand daughter's 2000 miata and I had to move my 1939 Buick to get it in the garage. What do you have under the car covers? I have 1984 Fiero and a 1991 Caprice under mine.
@MaxAC2 ай бұрын
@@handdtrufan6927 that's awesome, watch my other videos you can see the whole fleet. Cheers!
@charlesport12022 ай бұрын
hell ya brother
@MaxAC2 ай бұрын
Thanks buddy
@islandnites2 ай бұрын
I like the front a little high in the front. I don't care for the opposite where cars cars looks like they're going down the road on their faces:
@franciscocastillopons17552 ай бұрын
I respect people who make their own stuff
@davidkay62412 ай бұрын
Get your Self the front brake disc conversion with the two inch drop spindels.
@MaxAC2 ай бұрын
If i wanted a 2 inch drop i would have left the crappy old springs on it. and the power drums stop the car just fine.
@davidkay62412 ай бұрын
@@MaxAC why leave crappy springs on it? You said that it rides like crap with the old springs. And i would have installed new control arm bushings. Do it rite the first time. Have a nice day.
@MaxAC2 ай бұрын
@@davidkay6241 surprisingly the control arm bushings were still good so I lucked out on that. Cheers!
@Jordon_Fischer2 ай бұрын
Hey man great video just letting you know when your disconnecting those throttle linkages and govern spring always try to take the whole carb off first then take those off it just makes it a whole lot easier.
@billbecht94523 ай бұрын
Pretty cool
@UhBuddy19763 ай бұрын
😊 Bubba, I hope by this time you have bought yourself an impact.. I could’ve had them blades off in about 30 seconds. Lol.😊
@michaelfleming403 ай бұрын
I worked on my late father's secretary's lawn mower with that same type of two stroke engine. I bought a new condenser, a stater point, and a coil, put it all together and my word, it started on the 1st, maybe 2nd pull. I was one happy camper. Back in 1989. 😊❤
@lzh31313 ай бұрын
This is a really good video. Fixing the compression without dragging it out. Straight to the point! Thanks for making the video. Appreciate you were willing to sacrifice your camera.😅👍👍👍
@peachyclean933 ай бұрын
I absolutely miss my neon made it to 250,000 MI the body was shot because of the salt that they put on the road make sure you change over the transmission cooler from the radiator and make sure you change the timing belt that sucker will last you a long time !
@MaxAC3 ай бұрын
Trans cooler and timing belt? So the same problems my Xterra has... dang.
@610610billy6106104 ай бұрын
Now for the power. I have the same carriage. It's running 40v reliably, and the difference is very noticeable in power. I just use the dewalt battery pack adapters and ran it off 2 dewalt batteries. I have a 60v dewalt battery, but im not sure if I want to push it.
@808-Stat34 ай бұрын
I got clicking in front dash, middle and right lol. Just started. I gotta do all 4 I think.
@fightdhr88664 ай бұрын
I can pull the coil ground on my kholer and it bypasses all the switches..Got a runner..❤
@Bluegrassguitarman234 ай бұрын
Yes you should have painted the center and the dash it looks awful with everything else shining
@Bluegrassguitarman234 ай бұрын
The carburetor is not set properly it shouldn't surge like that
@davewinters32905 ай бұрын
I ordered my 14mm x 1.5 from Amazon. But the lug nuts are way bigger. I had to drill the rim hole out, I was afraid to tap those smaller lug nuts because you lose a lot of strength. Toyota Sequia and the larger Lexus SUV's use 14mm x 1.5
@MaxAC5 ай бұрын
Thank you for finding those
@mikecollins17525 ай бұрын
Ebay dude 7to 12 dollars toro chargers
@MaxAC5 ай бұрын
vs a $1 charger from a garage sale? and have to wait for some idiot to mail it to me? No thanks, have to maximize profits on resale.
@Claybowl50005 ай бұрын
Could have just drilled the rim to make it take round style lug nuts…
@MaxAC5 ай бұрын
I would suppose you could if you had a drill press that would hold a rim
@devonszpot5 ай бұрын
Worms just get bodied by like everything 😂
@chinocc11285 ай бұрын
I bought a doorman brand actuator and it had instructions on resetting I guess the motors or some like that to the actuator is that needed ?
@jtorres17645 ай бұрын
Why did you edit out the part of you putting the back light back in!?!? That’s where I’m struggling!!!
@MaxAC5 ай бұрын
How did you take the light out? Just put it back the same way.
@EZrider15 ай бұрын
Mopar magic!
@davidsmith66145 ай бұрын
GOOD CAR TO START WITH BUILD ITCLEAN
@zenashtv69115 ай бұрын
You have saved me and my car !! Your videos help me change my water pump and now my radiator ! I love the Hank hill reference ! My car had water pump issues and you help me fix it and now my radiator having issues and this here help thank you so much!
@MaxAC5 ай бұрын
Glad It could help
@alexandercage25005 ай бұрын
Some foreighn jalopy.
@tvoprosucks5 ай бұрын
did you ckeck the preload on the pinion bearings?
@MaxAC5 ай бұрын
Nope.. just went full send.
@melvis20175 ай бұрын
Thanks for the update and the way you explain things thanks once again for the efforts appreciate the great job and your great teacher 👍🇩🇰🙏
@jtorres17645 ай бұрын
What’s the part called exactly??
@jtorres17645 ай бұрын
My trunk won’t open with either of the buttons. When I press the trunk button on my key fob it lights up but won’t open.
@billrobinson93085 ай бұрын
Lucky kid learning how to drive a car basically that’s so awesome
@truthray28855 ай бұрын
She sounds so much better at the end than she did at the beginning.