Kegerator.com

Пікірлер

@user-nq7zu3yu7u Ай бұрын

Can I buy one.??

@EdwardJosephGlapinskiJR 2 ай бұрын

thx!

@user-nq7zu3yu7u 6 ай бұрын

Where yo buy

@JorgeCabrera-lb2pu Жыл бұрын

What pressure is recommended for the co2?

@towdjumper5 Жыл бұрын

Great stuff! Thanks just got mine. This by far is the best instructions video ! Thank you very much.

@ReefMimic Жыл бұрын

They give up on new videos?

@ReefMimic Жыл бұрын

Cool! Just the video I was looking for

@6581punk 2 жыл бұрын

I have what looks to be a smeg inspired fridge. I converted it to have 4 taps, it fits 4 kegs. I bought a similar drip-trap but when it arrived I thought it looked hideous and ruined the look. So I bought a glass bathroom shelf and fitted that to the fridge. I removed the glass and replaced with wood as it was too close to the door and it was easier to cut wood than glass. It's also a good idea to fit wood behind the shank and nut. I had to get some quite long shanks to do that but it makes it more robust.

@blackhouse7646 2 жыл бұрын

What brands are the best? Best warranty?

@lesgrossman3405 2 жыл бұрын

Never a good sign when you don't see a reply after this long. 🤡

@dzfromdetroit2840 2 жыл бұрын

Great vid

@samedwards6803 3 жыл бұрын

Doesn’t come with any instructions though!

@lynnallison9885 3 жыл бұрын

Here's a list that helped me out. whinyl.com/bkgrts-guide/ In the end, I went with #3. "1:38"

@StoneyardVineyards 3 жыл бұрын

Cheers we just found your channel and subscribed . We brew beer grow hops make mead and wines . Stop by and sub back friend if you can and stay thirsty

@FoodShowFan 4 жыл бұрын

Anyone have one of these to comment on its performance? Thank you

@echardcore 4 жыл бұрын

I am confused about the washers. I feel like there should be 2.

@gregoam1 4 жыл бұрын

Your instruction video doesn't address how to apply the faucet to the tower. Its either already attached (mine wasn't), or you didn't address it in the video. My faucet threads will not attach with the washer inside.

@jxl180 4 жыл бұрын

I just assembled my tower 10 minutes ago. It was *not* as easy to screw on as in the video. I don't know if there is a quality control issue with their threads but I was able to screw it on with some elbow grease. I was nervous I may have been stripping something, but it worked while maintaining downward pressure and twisting pretty hard.

@broluv124 4 жыл бұрын

Any special trick on getting the 5/16” barb fitting into the 7/16” flare nut?

@b.e.d.brewing3909 3 жыл бұрын

Use warm water on the tubing - this will make it pliant and allow you to push the barb into the hose (it still takes effort though.

@yannah159 4 жыл бұрын

Where’s the beer? Do I have to buy a keg to put inside? I have no idea how a kegerator will have beer???? I’m trying to learn!

@Papasquatch73 4 жыл бұрын

Yes the keg goes inside and depending on the model determines the size and number of kegs you use. This one in the video keg barrel size is ½, ¼, (2) 1/6, (2) Cornelius. A ½ is equivalent to 165 12 oz cans.

@ibristow2k 4 жыл бұрын

thanks this worked like a charm

@PepeDeezNutz 4 жыл бұрын

If I had the 7,000 I’d be drunk all day every day

@christianpaulh 4 жыл бұрын

Does it makes difference if I use my home beer on a D , coupler and keg system , or I use my home beer on a A coupler and keg system?

@zachflynn6845 5 жыл бұрын

I will take one

@michaelcard1973 5 жыл бұрын

Sigh..... "They attach to the valve and CO2 line to release compressed air into the keg..." It is NOT compressed air!

@cyclesdraw5341 5 жыл бұрын

Yeah he is an idiot lol

@ironmonkey720 6 жыл бұрын

Ask them for under counter installation instructions before you buy it... Good luck with that

@yuwilson3883 6 жыл бұрын

we manufacture the ball/pin lock disconnect, we have the best quality in China, my email: [email protected] my skype: salestomex

@widgetikiller 6 жыл бұрын

Great tutorial until the end. When I first used the neoprene clear washer as they show I had beer leaking everywhere. Until I switched it the the black thicker washer. Now it works great.

@stephenbraband7059 6 жыл бұрын

I have a question. I sent a friend of mine the Nostalgia Electrics KRS2100 Black Kegorator. He lives in the UK. His electric is 240v. Is there anyway of converting the kegorator to his electric? Thank you'

@sancocho1718 2 жыл бұрын

There are power convertors that one can buy. I had the same problem while deployed, couldn't use local outlets, we bought the converters over the counter at electronic stores.

@stephenbraband7059 6 жыл бұрын

@IronCross82 5 жыл бұрын

No you Need new a Power Source that can do 110v-240v Or Both.

@LouB3rt 6 жыл бұрын

This video should have been labeled "How much do you want to spend on a kegerator" -Great video though, well done and the presenter was very well spoken.

@Odyssey311 6 жыл бұрын

I have the BR3001 and I can confirm you can move your airlines to the outside of the unit by drilling through the "punchout" holes. I wanted to run both my 20lb CO2 & Nitro tanks. Great kegerator!

@dionmueller1948 4 жыл бұрын

@Odyssey311 Just curious if you ever went through with trying this? I asked the same thing to EdgeStar and then told me that the coolent lines were different for every fridge and advised against it.

@christopherhughes1184 6 жыл бұрын

I lost a canister of CO2 because I did not realize how tight the gas connections had to be! Really tight is the answer - unless I was doing it wrong? Seems like there should be better silicone or rubber gaskets or washers to keep leaks to a minimum.

@b.e.d.brewing3909 3 жыл бұрын

Whenever I change tanks I submerge the whole system in water to see if there are any leaks.

@bobbobson4607 Жыл бұрын

@@b.e.d.brewing3909 a spray bottle with soapy water is easier; just spray the joints and look for bubbles.

@user-vk9vi5hc6z 6 жыл бұрын

How can I fund it how match is it?

@psych0decil 6 жыл бұрын

Do you keep your co2 on after you install the keg or do you close the line in between uses?

@LouB3rt 6 жыл бұрын

You should most likely keep it open to keep the keg pressurized in case any more of the Co2 from the keg headspace is absorbed into the beer. That would be my recommendation. You always want your keg under pressure or it will tend to flatten sooner. If you are storing a keg try to make sure there is at least 30 PSI in the keg- you can search online how to purge a keg of its current CO2 to change PSI inside the keg.