2 жыл бұрын
2 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
4 жыл бұрын
Пікірлер
@andrewfrandsen3481 2 күн бұрын
How long after ordering did you receive it
@RoadPatina 2 күн бұрын
@@andrewfrandsen3481 took a week or so
@mannychico1 5 күн бұрын
Do you still have the drive shaft for the 5 speed??
@RoadPatina 5 күн бұрын
@@mannychico1 maybe, but I would have to dig much further than it’s worth!
@colspan9936 9 күн бұрын
Where did you find the lock/window switch? I need a set for my 2K RS coupe. Love what you're doing. It gives me a ton of enthusiasm for my own car!
@RoadPatina 9 күн бұрын
@@colspan9936 thank you! I found it used from a FB marketplace part out.
@lacais8069 12 күн бұрын
You could add a 1" wheel spacer to even out that side. I had the same problem with my rear axle, a full inch diffrence so i added a 2" wheel spacer to the left rear wheel and added a 1" spacer to the other side and front on stock rims and it turned out good.
@johnmullaney458 18 күн бұрын
Looking to fit 35x12.5 r18’s on my 21 tundra. If I space the bumper out will I be able to fit them on bilstein 6112’s and +25 offset?
@RoadPatina 17 күн бұрын
@@johnmullaney458 you may be close to the cab mount without aftermarket UCA. They correct the caster bringing wheel forward, away from cab mount.
@johnmullaney458 17 күн бұрын
@ thanks man! was planning on grabbing some ucas anyway!
@johnmullaney458 17 күн бұрын
@ any suggestions on modest priced ucas
@RoadPatina 16 күн бұрын
@@johnmullaney458 only have ran these from total chaos. Seem good but pricey. You could prob go with a metric tire slightly smaller and save some money and headache with more clearance.
@johnmullaney458 16 күн бұрын
@@RoadPatina looking to fit ridge grapplers which are closer to 34.75
@kuppler14 21 күн бұрын
Just ordered one. Can’t wait to get it and install it into my 2017 tundra
@RoadPatina 21 күн бұрын
@@kuppler14 nice!
@MichaelSmith-kt2tv 27 күн бұрын
Brandon nice video Thank you for such great info
@RoadPatina 27 күн бұрын
@@MichaelSmith-kt2tv you are very welcome! Thanks for watching.
@Gnik4144 Ай бұрын
1:43 same, I’ve always loved those wings
@loralkinney Ай бұрын
Do you have an email I can contact Dasaita?
@Matthias_764 Ай бұрын
did you have to cut wire and/or splicing into the factory harness? I had to do that on my 2003 Tundra and it sucked so I was hoping on my new to me 2015 model SR5 that I wouldn't have to cut wires or anything like that
@RoadPatina Ай бұрын
@@Matthias_764 no cutting or splicing. Completely plug and play!
@Matthias_764 Ай бұрын
@@RoadPatina bet, thank you!!
@thedon9670 2 ай бұрын
My pinch weld jacking points on my 2005 JDM STi are exactly like yours. They have also been crushed by improper lifting in Japan. Thanks for making this video, helps me out a lot!
@RoadPatina 2 ай бұрын
@@thedon9670 glad I could help! Get at it!
@eriknash8783 2 ай бұрын
I have always had poor results when going aftermarket on brakes, especially with toyota. OEM pads are always the best. Not even sure why you are doing brakes yet. Your OEM stuff still has 50% life. I guess you needed to make content for content's sake. I'm out
@JHKNVY02 Ай бұрын
There are several online test and while Toyota is near the top, and pretty incredible for most, there are a few better options but at significantly more cost. Toyota makes a great product
@Sophara.R33 8 күн бұрын
Only problem he did the brake job is because he got brake pulsation and he states that the brake just done not that long ago and it’s already warpped
@orientalwoodworks 2 ай бұрын
Nice vid! Do know if this is the only wheel method has that is hubcentric, or are there other offerings??
@RoadPatina 2 ай бұрын
@@orientalwoodworks thank you! I think they have a spec sheet on their website that shows the center bore of all their wheels.
@402car_kid4 2 ай бұрын
i went out of state to buy my 05 sti because i wanted no rust etc but when i took the wheel liners off it was packed with mud and sand like theyve been off roadiung lol. im ok with that because the rockers wasnt a spec of rust. i went through and scuffed and undercoated the whole underside and wheel wells with 2 part epoxy primer and herculiner. that shit is so tough and is amazing for undercoatings.
@RoadPatina 2 ай бұрын
@@402car_kid4 Nice! Sounds like a ton of work! Someday.
@DIESELLBZ 2 ай бұрын
Are you still on these same pads and rotors? How have they been holding up, and how many miles have they gone in the 2 years? Stopping performance? Would you buy them again? Sorry for all the questions lol
@RoadPatina 2 ай бұрын
@@DIESELLBZ same pads and rotors. Got a slight squeak but may just need clean and relube. I would def buy again over OEM for sure. Maybe 15k miles so far.
@DIESELLBZ 2 ай бұрын
Thanks for the input, and great video. Do you have a link for the kit you used?
@RoadPatina 2 ай бұрын
@ thank you! I bought the rotors and pads on tire rack. I should have added stainless lines. Next time!
@Josh-pn4qb 2 ай бұрын
Hello - have you experienced any issues since installing the unit? Did you relocate the mic since it was on the center speaker in the video?
@RoadPatina 2 ай бұрын
@@Josh-pn4qb no issues just the mic speaker is low. It’s now near the cluster.
@samsonitejones4012 2 ай бұрын
I have watched many of these Dasaita Install/reviews. But nobody mentions hooking up the factory GPS Antenna. Do these head units have Satellite GPS navigation? The car play is great but everything is cellular based.
@RoadPatina 2 ай бұрын
@@samsonitejones4012 Yes, there is a gps antenna that comes with the unit. I only use CarPlay but it does have gps antenna with its own nav.
@amicidavinci 2 ай бұрын
Does XM still work?
@RoadPatina 2 ай бұрын
@@amicidavinci I don’t subscribe to test. I don’t see why not. It does everything under the sun!
@303MoTo 2 ай бұрын
Thank you for posting this! I just did my own brakes (pad replacement only) on my Subaru BRZ, had my Tundra in for an oil change and they suggested pads and rotors for my rear brakes - a 2020 with only 35k miles. Seems to be a theme with these dealers. This looks super similar to the Bembo BRZ job I just did. Off to buy parts. They quoted me $600 for the parts/labor. Booooo
@RoadPatina 2 ай бұрын
@@303MoTo same same just bigger and heavier parts! Give it a go
@DrunkenChewbacca 3 ай бұрын
What are your wheel specs?
@RoadPatina 3 ай бұрын
@@DrunkenChewbacca 35x18x12.5 Method 18” +25mm offset. Zero offset pokes out more than I like!
@lukealdrich4780 3 ай бұрын
How did these hold up overtime? The rotors
@RoadPatina 3 ай бұрын
@@lukealdrich4780 holding up really good! Got a little squeak but prob need clean and lube.
@lukealdrich4780 3 ай бұрын
@ thanks for such a great video! I think I'm gonna go that same route.. I ordered TRD pads like 8 months ago and they finally shipped. I suppose I should do the rotors too since I don't really wanna resurface them. I see many others but most come with the pads. Do you think that would be a good set up? Thanks man again great video! 👍🏼
@RoadPatina 3 ай бұрын
@@lukealdrich4780 sounds good. I would get high quality rotors. My OEM rotors were resurfaced and warped fast. These have not warped at all.
@lukealdrich4780 3 ай бұрын
@@RoadPatina awesome, got em ordered and looking forward to the install thanks to your vid. And advice. Thank ya much.
@josebarillas4643 3 ай бұрын
subi/yota gang all day
@RoadPatina 3 ай бұрын
Amen to that!
@marknewman8609 3 ай бұрын
I have recently been having issues with Zlink (Apple CarPlay) in my Tundra. It randomly stopped working. I have tried searching and trying everything but cannot figure it out. All bluetooth still works so I think it is an issue with Zlink. Any suggestions?
@BrianAchaibar 3 ай бұрын
Beautiful truck man! You did great! Can you please share the link for the lug nut set up! Thank you!
@RoadPatina 3 ай бұрын
@@BrianAchaibar thank you! I appreciate that. The lug nuts are some basic black spline set that Americas Tire/Discount Tire sent with the wheels.
@herman6333 3 ай бұрын
Did it rub on your upper control arms?
@RoadPatina 3 ай бұрын
@@herman6333 not at all. TC UCA clear very well.
@DemetriGxC 3 ай бұрын
Glad to see my old car is getting the love it needed. Wish I had the money to fix her up back in the day.
@RoadPatina 3 ай бұрын
@@DemetriGxC hey man! She is coming along nicely.
@DemetriGxC 3 ай бұрын
Finally found your channel. Miss my 06 STI. Glad to see your videos.
@RoadPatina 3 ай бұрын
@@DemetriGxC She is in good hands! Coming together behind the scenes.
@pickledcottoncandy 3 ай бұрын
Do you think +12mm offset will work without a chop? The wheels i want only come in that offset. Thanks in advance if you answer.
@RoadPatina 3 ай бұрын
@@pickledcottoncandy I have a feeling they will rub with that offset and 35s. If they are your favorite choice, modifying the cab mount or a smaller tire may be worth it!
@pickledcottoncandy 3 ай бұрын
@@RoadPatina thanks, man. They are, and I really don't want to chop it at 20k miles. Damn.
@muletowndumpsters 4 ай бұрын
A 1" front level could fix that too?
@RoadPatina 4 ай бұрын
@@muletowndumpsters The King coilovers are about a 2in lift.
@DiLLY_V92 4 ай бұрын
Man I’m jealous. My 06’ sti I picked up to resto has completely rusted out rockers underneath the side skirts. I realized it when I went to jack the car up for first time and pinch weld disintegrated to rust dust. The car drives and runs so good though 🤣 I’m just gonna have to buy a welder and do my first rocker panel swap
@RoadPatina 4 ай бұрын
@@DiLLY_V92 buying tools and learning is a good thing! Check out @subiesantuary channel with all the rust repairs.
@Strat2352 4 ай бұрын
Thanks so much man! The auto connecting to Carplay was the only thing I was missing 👍
@RoadPatina 4 ай бұрын
@@Strat2352 glad it helped!
@ramirezrocks1813 4 ай бұрын
So is there any difference between shipping from china or us?
@RoadPatina 4 ай бұрын
@@ramirezrocks1813 probably depends if you live close the USA or China!
@rjnoj-xb5kq 4 ай бұрын
What’s the torque value for the caliper bolts? Sorry if I missed it. Thanks!
@Thuglife-5004 4 ай бұрын
Did you connect the ground wire to anything?
@RoadPatina 4 ай бұрын
@@Thuglife-5004 I don’t think I did, but it’s probably best to do so!
@undersc0r 4 ай бұрын
Man I remember watching your videos on the white rs a few years back and really wanting one. I ended up getting an mr2, but one day I gotta own one of these.
@RoadPatina 4 ай бұрын
I have always wanted an MR2, instead I choose to torture myself with old Subarus!
@TdMega 4 ай бұрын
I have an 06 , white , I'm the original owner 100k
@thedon9670 5 ай бұрын
Brilliant. I have a 2005 JDM EJ207 arriving from Japan in a few weeks and was wondering about doing something like this to make it a bit more functional. Looks like a fantastic upgrade!
@thedon9670 5 ай бұрын
I whole heartedly agree with your thought process - well done!!! I am getting a JDM spec 2005 Hawkeye STi from Japan shipped to Australia in a few weeks. Looks pretty stock and can't wait.
@RoadPatina 4 ай бұрын
@@thedon9670 awesome! Congrats
@jorxitoherrera 5 ай бұрын
Got a 2020 tundra, where can i get that grill ?
@RoadPatina 4 ай бұрын
@@jorxitoherrera Toyota dealer, it’s OEM!
@Jaronbrock333 5 ай бұрын
That thing is clean
@RoadPatina 5 ай бұрын
@@Jaronbrock333 not bad!
@lvp8068 5 ай бұрын
I installed it. I have 2 issues: the air bag is giving me an error. And the rear speakers are not working. There are some 5 connections from the tundra that don’t fit anywhere in the unit. Can someone please help?
@RoadPatina 5 ай бұрын
@@lvp8068 did you try the other CANbus box that comes with the unit?
@lvp8068 5 ай бұрын
@@RoadPatina yes, it is that bog box. i took it form the other set of cables and put it into the correct one. the air bag issue was resovled after i restarted the vehicle. the issue with the speakers still remains. it seems is a common problem. Also, i use a USB port to listen to my MP3s which im unable now to find this source in the unit. IS there a place where i can choose the usb port?
@HallFleming 5 ай бұрын
I spy some new blue carpet on that intro! 👀
@RoadPatina 5 ай бұрын
@@HallFleming you are correct, Sir! Good eye. Now I need to find the discontinued transmission tunnel pad. It’s soaked in soda and sauce 🫤
@shiftpinoy 5 ай бұрын
I just got this unit and my unlock/lock beeping noise stopped. Is yours still working??
@RoadPatina 5 ай бұрын
@@shiftpinoy yes, mine works. You should be able to go into the factory settings and change it. There may also be a software update
@shiftpinoy 5 ай бұрын
@@RoadPatina I’ve checked on the software update and it says it’s up to date. And I don’t have anything on the factory settings.
@COBALTGRUV 5 ай бұрын
I would like to know if anyone with a 2 gen tundra has installed a front camera with this unit, and what did you use? Video? Thanks! 🤘🏻
@Chinese_Chicken 5 күн бұрын
It is compatible for a front, just unsure who has done it. Factory HU is as well, YT channel Wheeling Full Size installed something around 8 cameras on his Tundra
@Rubiowelds 6 ай бұрын
Just installed and the main issue that might be a deal breaker is can’t figure out how to get the front door speakers to work also the eq doesn’t function normal . Only the front settings changes anything . If I mute front all speakers mute anything else does nothing
@RoadPatina 5 ай бұрын
Did you try to update the software? Reach out to Dasaita.
@philliprose8447 6 ай бұрын
Is it equipped with XM?
@RoadPatina 6 ай бұрын
@@philliprose8447 yes
@markmargevicius5717 6 ай бұрын
does it support SirriusXM sattelite radio?
@RoadPatina 6 ай бұрын
@@markmargevicius5717 I don’t see why not, it does everything else under the moon!
@amicidavinci 2 ай бұрын
@@markmargevicius5717 No. The XM receiver is the lower box on the factory head unit, which has multiple connectors going into the upper unit. This new head unit replaces the entire factory head unit. Others are saying you have to use the XM app on your phone. Deal breaker for me...
@xxxwafflemanxxx 6 ай бұрын
I have a 2013, I'm thinking about getting one. I know its a slightly different model, but I'm wondering if the regular FM Radio still works well. Thanks.
@youaclown8604 6 ай бұрын
Is this the g12 or g13 unit?
@TheOlds350rocket 6 ай бұрын
My screen never powered on checked the wiring everything
@RoadPatina 6 ай бұрын
@@TheOlds350rocket Dasaita tech support?
@TheOlds350rocket 6 ай бұрын
@@RoadPatinaI appreciate the reply if you can help me I'm willing to try again to see if it'll fire up
@theboosterdepot9723 2 ай бұрын
@@TheOlds350rocketdid you get this figured out? I swear I have everything connected property and it won’t power on when I start my car
@TheOlds350rocket 2 ай бұрын
@@theboosterdepot9723 yeah I got it working one of the pins in the harness was loose so I pushed it back in and it powered on.