Пікірлер
@makthecheese2004
@makthecheese2004 6 сағат бұрын
When i list vol, there is no reserve and im not sure where to go from there
@eazidiy
@eazidiy 2 сағат бұрын
Send me a screenshot of volume listed [email protected]
@XSyke
@XSyke Күн бұрын
AWESOME video man, this made my search for a head unit, and the proper procedures to follow very easy.
@eazidiy
@eazidiy Күн бұрын
You are welcome 😊
@DylanNorman-nu8lq
@DylanNorman-nu8lq 2 күн бұрын
13 dodge grand caravan?
@eazidiy
@eazidiy 2 күн бұрын
amzn.to/46mkkTc
@Pennicito
@Pennicito 2 күн бұрын
I have a 2011 Matrix base, if I open it and see that I have the correct clockspring, can I leave the airbag connected or is it safer to remove it either way?
@eazidiy
@eazidiy 2 күн бұрын
You will need to remove the airbag
@Phydous
@Phydous 3 күн бұрын
You are the BEST! I used your instructions on a 2003 Toyota Camry with JBL and (with only slight mods) it worked perfectly! Thank you SO MUCH!!!
@eazidiy
@eazidiy 3 күн бұрын
I appreciate your positive feedback ✨️ Could you share your mod for Camry with me at [email protected]?
@asher3888
@asher3888 3 күн бұрын
Wow, was about to change the camera, thanks for saving me the work!
@eazidiy
@eazidiy 3 күн бұрын
You are welcome 😊
@asher3888
@asher3888 Күн бұрын
@@eazidiy Ah, mine was difficult to find the settings but I finally found it. I’m on android 12, I had to put the car into reverse, then press and hold the screen. A little cog appeared on the screen, clicked that and entered the code 0000 to get to the settings 🥵. It’s done now though, thanks! And thought I’d share for others
@eazidiy
@eazidiy Күн бұрын
Thank you for that piece of information.
@makis71
@makis71 3 күн бұрын
Hi, what's the cable with the white plug called? I need one of those. Thanks in advance
@eazidiy
@eazidiy 3 күн бұрын
Wiring harness
@makis71
@makis71 3 күн бұрын
Thanks for your fast reply, I'm trying to find the exact same one (female) but I only run into the opposite one (male)...no luck
@eazidiy
@eazidiy 3 күн бұрын
The female is hard to find
@Assrael_sucks
@Assrael_sucks 6 күн бұрын
PAKISTANI BROTHERS In toyota corolla gli 1.3(both auto n manual), all corolla xli dont support cruise. the ecu is not capable. for 1.6 and 1.8 its possible.
@ronelsuarez-e7c
@ronelsuarez-e7c 6 күн бұрын
for toyota corolla 2012 do i need to change the clock spring?
@eazidiy
@eazidiy 6 күн бұрын
No. You won't need to do that.
@ronelsuarez-e7c
@ronelsuarez-e7c 6 күн бұрын
so i will just buy the multifunction pad and harnest/wiring going to head unit?
@eazidiy
@eazidiy 6 күн бұрын
Yes!
@ronelsuarez-e7c
@ronelsuarez-e7c 5 күн бұрын
@@eazidiy thanks!!
@leonardmayer2362
@leonardmayer2362 7 күн бұрын
Where do you buy another vacuum tube?
@eazidiy
@eazidiy 7 күн бұрын
Autoparts store. I got mine from Autozone.
@MahomeboyMyGOAT
@MahomeboyMyGOAT 8 күн бұрын
How did you know to cut the orange and black wire? I plan to install the right side steering wheel controls as you did, but using a Kenwood radio instead. Once I get the car soon, I will come back and comment to let you know what worked. Thank you for your tutorials, I always install a new radio in every car I get it’s always easier thanks to KZbin friends like you. Subscribed 😺😃😄
@eazidiy
@eazidiy 8 күн бұрын
I appreciate your comment and subscription. The pin 4 is what to cut. In the diagram, it is a Tel/Mute wire. For your radio, it may be a different wire color.
@jeremyraeber4234
@jeremyraeber4234 9 күн бұрын
I can't thank you enough for making this video. You have no idea how much I search KZbin and Google to find something like this. I search for almost 6 months before I found you and now can install my DRL LED Switchback headlights in my vehicle. Thank you thank you thank you
@eazidiy
@eazidiy 9 күн бұрын
I really appreciate your comment. Thank you.
@TorresmoLover-ud2nr
@TorresmoLover-ud2nr 11 күн бұрын
Man you are awesome ! Cloned HD to SSD and BAAMM! error code oxc000000e. You ve save me, thanks a lot !!!
@eazidiy
@eazidiy 10 күн бұрын
You are welcome
@MidnightLadyCrow
@MidnightLadyCrow 14 күн бұрын
On my 2010 chevy cobalt diagram I only see positive and ground. I put the yellow with positive, black with black and put all the colors for speaks. I had removed the original connectors because my friend told me to, I shouldn't have done that and just get a harness. Now it won't turn on when I turn on the vehicle at all. Do I need to put the red wire with the yellow together onto the positive wire? Idk what to do. Please help.
@eazidiy
@eazidiy 13 күн бұрын
Yes, put the red and yellow wires together on the positive wire.
@peeroayad357
@peeroayad357 14 күн бұрын
Thank you bro ❤️
@eazidiy
@eazidiy 14 күн бұрын
You are welcome 😊
@jameshansen8931
@jameshansen8931 14 күн бұрын
I wonder if this works on a GX470? My warm idle is like 1,000 to 1,200 RPM. I know that's about 400-500 RPM too high...
@eazidiy
@eazidiy 14 күн бұрын
You may give it a try!
@SimplyOffthechain
@SimplyOffthechain 16 күн бұрын
Same thing happened to me , it said the adapter will work and it didn’t . So ima cut mine as well and make this work . Not spending more Money lol
@eazidiy
@eazidiy 16 күн бұрын
Hey! You got to do what you need to do 😃
@Brian1.
@Brian1. 16 күн бұрын
Thanks for the video. Use Metra 72-8104 speaker harness. It is the correct harness to connect speakers on Toyotas
@eazidiy
@eazidiy 16 күн бұрын
Thank you for the information
@aryankhattra08
@aryankhattra08 16 күн бұрын
I ordered the kit from the website you listed but it doesn’t say when I will get it? Do you know maybe how many days it takes to get to me?
@eazidiy
@eazidiy 16 күн бұрын
USPS Ground 3-5 days
@BlackJedi169
@BlackJedi169 16 күн бұрын
Interesting... That looks like a toyota. I am about to run some cable from the battery to the boot. But the cable you are using looks extremely small to what i am doing, as i want to run 0 awg and it is way much fatter than that, good video though😊
@eazidiy
@eazidiy 16 күн бұрын
Yes, it is a Toyota Corolla
@amilcareschettini5881
@amilcareschettini5881 17 күн бұрын
I keep getting a P0101 and replaced the MAF with OEM. Throttle body is clean, and the engine filter is relatively new. My mpg has dropped in my 2018 significantly too....
@eazidiy
@eazidiy 17 күн бұрын
Please check the harness connector and wire for corrosion too.
@puletlali4652
@puletlali4652 17 күн бұрын
I have polo vivo 9n 2014 could you pls tell how to connect
@eazidiy
@eazidiy 17 күн бұрын
Unfortunately I do not have the wiring diagram for your specific car. Simply color match the wires, I hope it will be helpful.
@882828jc
@882828jc 19 күн бұрын
My backup camera had a red piggy wire and RCA plug which go to the back of the head unit. It said has go to trigger or reverse wire. In this video, seem like you don't has it, where does it can hook up to ? Thanks you.
@eazidiy
@eazidiy 19 күн бұрын
The radio harness has a reverse wire trigger. It is different color wire.
@THEBOSSKEVIN
@THEBOSSKEVIN 19 күн бұрын
Wait so your car didn’t already have a back up camera if you had to do all that for reverse camera?
@eazidiy
@eazidiy 19 күн бұрын
The model of the car didn't have a camera. Also, a new android radio was installed.
@THEBOSSKEVIN
@THEBOSSKEVIN 19 күн бұрын
@@eazidiy got you ! I was asking because mine do have a back up camera so that means all I gotta do is connect the reverse camera with the new stereo I will be getting right.
@eazidiy
@eazidiy 19 күн бұрын
@THEBOSSKEVIN you must know the right wires to connect to to hook factory camera to aftermarket radio. Sometimes, it may be complicated. Check owners manual or search online for wiring diagram.
@THEBOSSKEVIN
@THEBOSSKEVIN 19 күн бұрын
@@eazidiy got you. Thanks will do that.
@adamn5821
@adamn5821 21 күн бұрын
Why did you use a different scanner to clear the code?
@dopd5675
@dopd5675 21 күн бұрын
hey where did you get the mount for the screen i have a toyota 2007 sport and my screen has no mount idk what to do
@eazidiy
@eazidiy 21 күн бұрын
Here is an Amazon link amzn.to/3XRge3g
@dopd5675
@dopd5675 20 күн бұрын
@@eazidiy thank you so much
@eazidiy
@eazidiy 20 күн бұрын
@dopd5675 you are welcome
22 күн бұрын
I have to change my speakers as well. Thanks for the video
@eazidiy
@eazidiy 22 күн бұрын
You are welcome
@Brian1.
@Brian1. 16 күн бұрын
Check out the metra 72-8104 speaker harness. This is the correct harness to get if you do not want to cut wires.
@XannyBoy
@XannyBoy 22 күн бұрын
Can i ask do you know what power harness for a 2005 mercury sable LS
@eazidiy
@eazidiy 22 күн бұрын
Please check online. Amazon, Ebay etc.
@XannyBoy
@XannyBoy 2 күн бұрын
@eazidiy ended up buying the metra 99-5719 headkit it wasnt cheap but it actually made my ac run correctly somehow 💯💯
@iroshwimaladharma5840
@iroshwimaladharma5840 22 күн бұрын
I want the browser data including the history, passwords, to be there after installing Win 11, how to do it? Other files I can save in another Driver in the same Laptop right? And would it be possible to update Windows 11 when there are updates available automatically? I have Dell Latitude e7250 (i7 5th Gen)
@eazidiy
@eazidiy 22 күн бұрын
Unfortunately, a fresh install is required for these steps to work.
@iroshwimaladharma5840
@iroshwimaladharma5840 22 күн бұрын
​@@eazidiy what about Windows update after installing Win 11?
@badmatt4227
@badmatt4227 25 күн бұрын
I have four wires: White x 2 each Black Grey No readings with black to grey. Only a reading white to white. TN/WH is low signal bank 1 sensor 1 PU/WH is low signal bank 1 sensor 1 GY/WH is low control bank 1 sensor 1 PK/BK is fuse control
@eazidiy
@eazidiy 24 күн бұрын
The white wires are for the heater in your oxygen sensor. If you have readings, it means the heater is working. You may have other issues with the sensor.
@badmatt4227
@badmatt4227 24 күн бұрын
@@eazidiy So if no reading with the black and grey that would mean ______
@eazidiy
@eazidiy 24 күн бұрын
@badmatt4227 those are reference signal wires to measure the air to fuel ratio.
@badmatt4227
@badmatt4227 23 күн бұрын
@@eazidiy So, if no reading the sensor is bad?
@eazidiy
@eazidiy 23 күн бұрын
@badmatt4227 those are reference readings when the engine is running to my measure air to fuel ratio.
@teemubjorkbacka7714
@teemubjorkbacka7714 25 күн бұрын
Thanks G
@eazidiy
@eazidiy 25 күн бұрын
You are welcome my G
@JayT-z1b
@JayT-z1b 26 күн бұрын
Hi, Thank you for the video. Did you use a relay for trunk release?
@eazidiy
@eazidiy 26 күн бұрын
No. You will need relay depending on the locking system used.
@benomar9350
@benomar9350 28 күн бұрын
Thank you. Very appreciated.
@eazidiy
@eazidiy 28 күн бұрын
You are welcome 😊
@thomasjefferson3552
@thomasjefferson3552 28 күн бұрын
Will this work on a 98 4 runner?
@eazidiy
@eazidiy 28 күн бұрын
You may give it a try as long as it is an A/T
@thomasjefferson3552
@thomasjefferson3552 28 күн бұрын
@@eazidiy a/t meaning automatic? I have a 3.4 automatic v6 l 4x4 limited version, thanks again
@eazidiy
@eazidiy 28 күн бұрын
@thomasjefferson3552 yes A/T is automatic transmission
@Chris-sz1fz
@Chris-sz1fz 28 күн бұрын
Will this only work with a head unit that has capability of programming the individual button settings as you do at the end of the video?
@eazidiy
@eazidiy 28 күн бұрын
Yes. It should work
@Chris-sz1fz
@Chris-sz1fz 28 күн бұрын
@@eazidiy I’m going to be installing a Joying head unit. I’m not sure if I can program the steering wheel controls on the stereo or not. I’ll try it. Thanks!!
@eazidiy
@eazidiy 28 күн бұрын
@Chris-sz1fz yes can program the SWC. Look for the settings on your radio.
@belafre
@belafre Ай бұрын
Thank you. You saved me hundreds in having to go out and buy a new laptop. Kudos to you for the clear-cut video. I installed WIN 11 Pro on my HP Elitebook 850.
@eazidiy
@eazidiy Ай бұрын
You are welcome!
@tubo_channel
@tubo_channel Ай бұрын
So this doesn't work for me sadly, but i FINALLY had mine working after following the instruction from an answer on reddit titled "bootrec /rebuildbcd "the requested system device cannot be identified" " it didn't work at first but then i changed the boot option in bios to the 2nd of windows boot whatever (there are 2 option of the same name, but apparently the 2nd one was a windows recovery one), save the changes and then it works! if you're having the exact same error this might help you :)
@eazidiy
@eazidiy Ай бұрын
Thanks for sharing your experience.
@msnyder4849
@msnyder4849 Ай бұрын
Where did you buy the backup camera that mounts with license plate light cover?
@eazidiy
@eazidiy Ай бұрын
a.aliexpress.com/_mOuwinQ
@msnyder4849
@msnyder4849 26 күн бұрын
Thank you
@TheMuscolinas
@TheMuscolinas Ай бұрын
I was sent the wrong radio. it’s too small to fit in my car
@eazidiy
@eazidiy Ай бұрын
Please be aware you purchased a 7 inch radio and you will need dashkit to fit around the radio. Here is the link to buy the dashkit Single or Double DIN Installation Dash Kit : amzn.to/3r7rC9n Radio Wiring Harness For Toyota: amzn.to/3r5d6Pt
@imdyair
@imdyair Ай бұрын
how did you connect right side the cable is so short
@eazidiy
@eazidiy Ай бұрын
Simply use a wire tap.
@imdyair
@imdyair 10 күн бұрын
@@eazidiycan you do a video on that or show how you wired your right side?? :) 😅 i did the left side so correct but my right side still not connected i want to be sure i use the wire taps correctly
@udayreddy1230
@udayreddy1230 Ай бұрын
Hi, I recently installed cruise control in my 2010 Toyota Corolla CE. While the dashboard indicates that cruise control is active when I press the button, it fails to maintain the set speed, causing my speed to decrease instead. I’ve ensured all wires are connected as per instructions. Could you help me identify what I might be missing?
@eazidiy
@eazidiy Ай бұрын
Hi, do you have a prewired pin 40 in your ECM? Also, check my other video on how to use cruise control kzbin.info/www/bejne/kIiboJafrpV5n8ksi=fU9qn7dvvnNbIFuK
@udayreddy1230
@udayreddy1230 Ай бұрын
@eazidiy Hi thanks for the reply. Yeah i have checked the ECM there is a blue wire below Yellow wire(yes it is prewired)
@eazidiy
@eazidiy Ай бұрын
So, your cruise should work. Check video link I sent on how to use it. If no result, the switch may be faulty.
@udayreddy1230
@udayreddy1230 Ай бұрын
Damn man you just made my day. Thanks for the reply and video suggestion. I was wrongly accessing the cruise control. I followed your advice its working. Thank you so much 😊
@eazidiy
@eazidiy Ай бұрын
@udayreddy1230 you are welcome
@lejend69
@lejend69 Ай бұрын
I have one question I have a blue remote wire coming from my amp which wire on the back of the harness should I connect that to to turn it on when the car start up ( the power antenna or splice it into the red wire ? ) thanks
@eazidiy
@eazidiy Ай бұрын
Splice it into red wire 12v ACC
@reyor.m5078
@reyor.m5078 Ай бұрын
I need the harness if is the 26 pines can you put the link so I can buy it from your store?
@eazidiy
@eazidiy Ай бұрын
Unfortunately, I do not have the harness available. Thank you
@AustinPetDetective
@AustinPetDetective Ай бұрын
if the heating element is not working will that make the o2 senor black in colour ?
@eazidiy
@eazidiy Ай бұрын
The black build-up on the O2 sensor is from the exhaust.
@chayannecuellar7032
@chayannecuellar7032 Ай бұрын
Will this work for a 2008 scion xb?
@eazidiy
@eazidiy Ай бұрын
Get the correct harness for your car and color match the wires. It will work as long as your car do not have a factory Amplifier
@jornt
@jornt Ай бұрын
Thank you
@eazidiy
@eazidiy Ай бұрын
You are welcome
@user-we5mi6zl2s
@user-we5mi6zl2s Ай бұрын
Unmeasured air.
@eazidiy
@eazidiy Ай бұрын
You are correct
@user-we5mi6zl2s
@user-we5mi6zl2s Ай бұрын
@eazidiy high vacuum at idle, short term fuel trim should be compensating for the unmeasured air l think.
@alsaysamone4148
@alsaysamone4148 Ай бұрын
Very good instructions video! But it is not complete without the adjustment instruction. Follow up video??
@eazidiy
@eazidiy Ай бұрын
Thanks for the feedback
@cofilm1
@cofilm1 Ай бұрын
Перевод текста с помощью камеры Hello, can you help me solve this problem on Instagram?
@kniteblud7868
@kniteblud7868 Ай бұрын
Omg. You just saved me. Thank you so much.
@eazidiy
@eazidiy Ай бұрын
You are welcome 😊