I love the design but the fact the battery isn't replaceable and they don't sell replacement filters is a bit of a deal breaker.
@TwoTone332 күн бұрын
So question I have this keyboard the hyperx alloy 65% and I also have the razer mini huntsman, The razer has red switch with optical switches, so like the red switches witht he wire on it, and I do like them cause its quiet. Would it be possible for me to take my hyperx apart and switch it out with the razer ones?? cause I know the hyperx isent hot swappable which is kinda dumb I think.
@MisterBlinkBlanco6 күн бұрын
What is that pouch at 6:20 ? Looks great
@mabehir49388 күн бұрын
î spilled a drink on my 2 months old hunstman v2. some buttons are sticky now and come back up very slowly. do you think i can clean it with this methode?
@WinKo-b2p9 күн бұрын
how to tie?
@justinfg806218 күн бұрын
Haven't been watching at all recently, thought you had stopped
@avgsgn17 күн бұрын
I admit I’ve been super busy with work and life so uploads have taken a back seat.
@hiper_tops20 күн бұрын
Did you measure the starting speed? Very cool :)
@JTG40cal24 күн бұрын
I have been hunting for a W micro mini forever if anyone knows where to find one!
@avgsgn24 күн бұрын
Wow that’s pretty rare! Hope you snag one!
@Christine-u2j25 күн бұрын
great review!
@avgsgn25 күн бұрын
Thank you!
@chase797426 күн бұрын
Just bought this mic, and the audio quality isn't good. There's a lot of peaking and distortion even when talking further away from it.
@avgsgn26 күн бұрын
That’s where you need to adjust the internal mic gain down, that’s what’s happening for you.
@CaddikenАй бұрын
🫡
@MUGA_EnjoyerАй бұрын
How did you manage to connect them? No matter what I do I see two different Bluetooth devices with the same name and only one works per time. The instructions provided in box is not clear and bad written.
@avgsgnАй бұрын
That’s weird. You might have gotten a faulty set. Mine was really straightforward, only one line item appeared in my BT list.
@MUGA_EnjoyerАй бұрын
@ no problem, I resolved it by watching tutorial of a different product with the same technology using different combination of taps not mentioned in instructions for some reason, they just had to be synced between each other
@avgsgn25 күн бұрын
@@MUGA_Enjoyer That's so strange... but I'm glad you resolved it! I don't believe I've ever experience something like this, even with other earbuds. Thanks for sharing though!
@CircleSportsMusic_phАй бұрын
Why i Can’t hear the condenser mic? I only hear the output voice of maono condenser if i will play the recording..
@avgsgnАй бұрын
I’m a little confused about what you’re facing - the Maono condenser is the condenser yeah?
@tactical_gokuАй бұрын
Check out the 511 Tactical ABR Plate Carrier in combination with your INVRT system. You can stow the INVRT in the 511 ABR carrier and deploy it over the plate carrier system.
@avgsgnАй бұрын
WHAT! Okay i have to check it out!
@omgsssaazzff-v3oАй бұрын
Can you bind the top buutton to ctrl+shift+alt and the forward button to trigger the combination ctrl+shift+alt+BT5 ?
@avgsgnАй бұрын
I’ve not tried that but i don’t think that’s possible though. Maybe in separate software (like for games for example), it may be possible.
@omgsssaazzff-v3o27 күн бұрын
@@avgsgn Okay, damn.
@omgsssaazzff-v3o27 күн бұрын
@@avgsgn I tried asking keychron, they have a simular mouse and it does not have this feature either, they are probably all built at the same china factory :'/
@avgsgn25 күн бұрын
@@omgsssaazzff-v3o I think it could be a firmware-based limitation.
@ZYGTropicalsАй бұрын
This is soooooo F’ing awesome!!!! Holy F’ck!!!!!!!!
@jamiepalmАй бұрын
Hi is the sizes same as the Oura ring? Just asking cause I have an Oura ring
@avgsgnАй бұрын
Yep, US sizes are the same.
@prodigy_xdАй бұрын
Thank you for the video. I still have this Keyboard and i thought about buying a new one, because i dont like some of the noise (spacebar and backspace mostly). I noticed that not the stablizers seem to be the problem, but the rattle of the switch stem itself. If you just put your finger lightly on the side of a key and wiggle, you can see that there is a lot of flex and give on every key. They are kinda loose fit. That of course is audible every time they jump back into position while typing. I have now decided against modding or replacing, because it is not super terrible, and i recently started wearing ANC headphones while working... that is also a solution to keyboard noise, i guess 😅
@avgsgnАй бұрын
Hahaha ANC is magic isn’t it? Also - it’s been quite some time since I made this video and I found out that the metal “stabilizers” are there to ensure each keypress is even all the way throughout!
@mastaleeАй бұрын
Vision FG 👍
@maximilianocastellanos22992 ай бұрын
Mine just broke. I swear idk if did something wrong. But ur supposed to use different side one for vacuuming and one for dusting. But now my battery doesn’t charge
@avgsgnАй бұрын
That’s right. Different sides. Anyway - mine’s the same. The battery doesn’t charge. It lights up for a couple of seconds when i plug it in but it doesn’t turn on.
@StarbucksBobАй бұрын
@@avgsgn is HOTO replacing yours? or are you looking for the next duster vacuum combo, would appreciate an update video
@twomelodyinaharmony2 ай бұрын
Can we also use this for recording song covers? Is it preferable for singing?? Please help brother!
@avgsgnАй бұрын
You might want to try Fifine’s mics instead of this for singing purposes. The gain management is quite sensitive on this mic!
@twomelodyinaharmonyАй бұрын
@@avgsgn Thank you so much for your advice brother!!
@goldie98642 ай бұрын
Maybe wasnt what you wanted, but I think it looks amazing and better than I expected.
@avgsgnАй бұрын
Thank you, it definitely makes me feel better 😁
@Cal3163262 ай бұрын
Great review bro. Best I seen so far. Just got it from shopee on flash sale at only $17.70
@avgsgn2 ай бұрын
Dude $17.70? That’s A STEAL!
@MrNobodyIII2 ай бұрын
let me know if you ever get rid of it
@hoongfu2 ай бұрын
Woooo ergo keyboards! Just what I need.
@avgsgn2 ай бұрын
Yeah you do need one! Hahahahaah
@Gman10242 ай бұрын
Ooh wee, that ano purple nurple is saweet.
@avgsgn2 ай бұрын
I’ve since swapped out the keycaps though! On hindsight i felt that the vior set was a little too red.
@TheWeaversofEternity2 ай бұрын
Yessss! Was waiting to see your Neo Ergos! Glad you decided to make a video on them. Great builds, shots, and editing bro!
@avgsgn2 ай бұрын
Editing wasn’t the best in this one I think - there’s still a lot for me to improve on. But thanks my dude! Appreciate you being on this journey with me too, haha!
@Daddysbehind2 ай бұрын
Neo what? 😂
@IrisFifine2 ай бұрын
Nice vid! Thanks for the wonderful review and for your kind support for FIFINE! :)
@avgsgn2 ай бұрын
Thank you and FIFINE for your support as well!
@hoongfu2 ай бұрын
Do you have a podcast now? :O
@avgsgn2 ай бұрын
HAHAHAHAHA no I don’t!
@GSC7GBB2 ай бұрын
You should revisit spinners and fidget toys. Lots of cool new stuff to check out 😅
@avgsgn2 ай бұрын
I've still got good friends who are still really into spinners and fidget toys so I'm still sort of "in touch". However, sit tight - I've got something interesting to share soon :)
@hoongfu2 ай бұрын
@@avgsgn teasing us! Looking forward to it!
@rbeezy202 ай бұрын
Does both side turn on at the same time?
@avgsgn2 ай бұрын
Yes it does. It’s standard physics for air flow actually - when air goes in one way, it has to come out the other.
@Moontrak2 ай бұрын
Why nobody create one with just sicssor, blade, saw😉
@avgsgn2 ай бұрын
Maybe you can!
@BENGYBOY773 ай бұрын
How did you remove the back screw? I see where it is but I don’t know how to get to it to unscrew it. The one by the usb c port
@mathew60973 ай бұрын
is this good buy?
@avgsgn2 ай бұрын
IMO, if you’re new to mechanical keyboards then definitely yes. However if you’re already knee deep into the keyboard hobby, then maybe not!
@mathew60972 ай бұрын
@@avgsgn leobog hi75 or this xvx keyboard?
@avgsgn2 ай бұрын
@@mathew6097 Hmm, that really now depends on design aesthetic. I find that knobs are super useful, but IMO it doesn't look pleasing given how large it is on the hi75. Price wise, I'd say the hi75 is a better bang for your buck and has lots of color optios (and kit / prebuilt options) but the xvx has a screen with good customizability, and the screen layout itself helps it stand out from the sea of 75% keyboards in the market.
@mathew60972 ай бұрын
@@avgsgn thanks i went to leobog hi75 :D
@mathew60972 ай бұрын
@@avgsgn i just bought it from amazon 50% off, got it for $40
@Sanguivore3 ай бұрын
Great review, my brother! :D Glad you are enjoying such a nice knife!
@tjp-re4du3 ай бұрын
I just spent an hour swapping scales on my Manix 2. The lanyard tube destroyed me, i got it done. But the screwdriver tip is great.
@avgsgn3 ай бұрын
I’m glad you got it done. Sigh, the pain of the lanyard tubes!
@N3wbMa5t3r3 ай бұрын
Ultem on knives sucks. You get a drip of lubricant under the scale and it looks like crap.
@avgsgn3 ай бұрын
Oh my dude I wholeheartedly agree. Same for any clear type scales. You can see the ugliness the lube caused on the clip side of the acrylic scales when I weigh it in this video too.
@N3wbMa5t3r3 ай бұрын
@@avgsgn I love the cool look of Ultem but I sent mine back and got the G10 version.
@meesterskullbaby3 ай бұрын
my original FG fell apart in a few months and i've lost the screws. I love the lock and the blade but the build quality seems a little low.
@avgsgn3 ай бұрын
What!! Did you get in touch with CIVIVI for that?
@theunknownatheist38153 ай бұрын
Try putting some tape inside the scales to change the sound. 😂
@avgsgn3 ай бұрын
Exactly hahahahahahaha
@Youboobcensorsfreespeech3 ай бұрын
When did the sound of a knife became a thing? 😂
@alexcole20783 ай бұрын
decent video. use the steel washers that come with the aluminum scales no matter what version of the vision you get. the steel washer prevent the bearings from wearing the aluminum.
@avgsgn3 ай бұрын
Yes the steel washers are in there, I just did not include them in the weight when weighing the scales.
@hoongfu3 ай бұрын
Man they all looks so good! Good buy on the scale! How did you ever calculate shipping costs accurately prior? LOL To change the sound go back to your old school Nerf modder roots and use some hot glue hahahaha. jk Maybe resin?
@avgsgn3 ай бұрын
It’s usually just an estimate. For a small, light item like this I usually don’t sweat it. Honestly I think foam would really help. I might cop some adhesive foam.
@Gman10243 ай бұрын
Sweet pattern and they did a great job on the finish. I don't have a vision yet, but besides the obvious black coated, didn't realize the finish differered so much with the other versions, good to know. Tons of weight reduction , wow over thirty percent is huge and great for those who like a lighter edc. Maybe you can spread some shoe goo or rubber cement on the inside of those liners to change the sound without adding too much weight. Thank you for sharing in this slice, and I hope things are going well for you and yours B.
@Gman10243 ай бұрын
On a sidenote, I bought a Tacklife DC01 Digital Caliper on 4m4zon about seven or eight years ago for measuring spinner buttons, bearings, etc. for around ten bucks. Not sure if they're still available or not, but am sure there's another offering in that price range if it isn't. And since I mentioned spinners, here's a GAGA BUCE!!!! for old time's sake, haha.
@avgsgn3 ай бұрын
Thank you for the support always Gman! Oh shoe goo, I didn’t even think of that! That’s an interesting one. I’ll defo have to look into it. For the calipers, I really just might consider!
@juvefc1233 ай бұрын
Ashkeebs have a few on sale. I just bought a B-stock black, with hot-swap PCB and FR4 plate, all-in for $162+shipping. Given that price, would you change your opinion on recommendation? They still have some solder PCB's on sale too if you still wanted to try one out
@avgsgn3 ай бұрын
$162? That’s a steal. I wouldn’t be complaining much if it was $162!
@Scythlex3 ай бұрын
Just orderd mine, its 162 CAD too which is nuttty. Got the soldered version (will be my first soldered, and plateless) can't wait!
@vanthang78364 ай бұрын
Its so good Where can I buy it?
@nicolelairdese8374 ай бұрын
246 Rae Avenue
@aodaibdarni4 ай бұрын
Amazing build! Can I ask.. What's exactly the Salvun's suggested leaf spring config ?
@bugloaf4 ай бұрын
Funny thing, my original G10 scales came off really easily, but the liners didn't want to budge. That's ok, because I didn't want to deal with removing the blade anyway.