4 ай бұрын
4 ай бұрын
5 ай бұрын
5 ай бұрын
6 ай бұрын
6 ай бұрын
8 ай бұрын
8 ай бұрын
8 ай бұрын
8 ай бұрын
Пікірлер
@sabio2009 6 күн бұрын
How are those panels braced when installed since there are no top, middle or bottom 2”x4” rails?
@fencegenius 5 күн бұрын
Thanks for your question. If you look 18:30 into the video you see the top and bottom rail the boards are nailed onto and there is a 2x4 cap. We build panels to go between posts and screw each rail to each post with 2 - pcs 4" #10 Exterior Screws through predrilled holes that we drill in the process.
@Nazariosanchez91 6 күн бұрын
Is there a chain link fence version ? Thank you
@fencegenius 6 күн бұрын
Thanks for your question. We are currently only focused on Wood. In the future we hope to bring in various Metal and Vinyl types. Chain link is currently a distant desire because we have the least to offer with chain link because we are focused on enabiling PreFabrication of Panels or Kits. (The primary goal of Fence Genius) But we have been told there is a need for better estimating and BOM with Chainlink so we are considering it. Thank you
@murrdawgsmurray1256 27 күн бұрын
no gaps between fence boards for expansion / contraction?
@fencegenius 26 күн бұрын
With Western Red Cedar (Green Cedar Non Kiln Dried) in the NW we don't have an expansion issue, rather there is more of a contraction. IF someone is using Import Dry they need to induce gaps. Thanks for the question
@DanielRodriguez-yj4cu 28 күн бұрын
Wher do you find those apps for Android ?
@fencegenius 26 күн бұрын
Hi Daniel. There is only an iOS app at this point. Thanks for your interest.
@alanplacko Ай бұрын
It's interesting they allow 6ft fencing on a corner lot, is it normal to have municipalities allow this? I have very strict guidelines in my neighborhood.
@MrEricknudsen Ай бұрын
There are regulations on corner lots but primarily on the actual corner due to visibility. But this is a backyard set far back from driver’s vision. Thanks for watching and for your question.
@justinh6974 Ай бұрын
What type of fasteners are you using in your nail gun?
@landmarkcreations1183 Ай бұрын
We are in the Pacific Northwest as well and I could totally see how pre made panels would really be beneficial especially in rough access or areas that have bushes and stuff in the way. Often times it’s difficult running an air hose and not getting it caught on stuff much less branches hitting you in the face while your boarding
@fencegenius Ай бұрын
We would love to work with you on some of your projects as a fabricator. You set the posts, we can measure and fabricate, then you decide if we install or you install on your preset posts. Think of us like a cabinet contractor thinks of the factory that creates the cabintes, or the general contractor thinks of the truss manufacturer. Please reach out to us at [email protected]
@landmarkcreations1183 Ай бұрын
@@fencegenius we would love that. We are on a run of chainlink jobs at the moment but would love to see how that process works
@amc1325 Ай бұрын
When you are first hanging the panel what is the attachment point between the post and fence? Looks like a piece of hardware on the post side - is there a corresponding piece on the panel side?
@fencegenius Ай бұрын
Part of the process isn't shown in this video but is shown in earlier MyFence videos. Our iOS App prompts the installer with the exact post cutoff height measurement, from the top of the uncut post and it also prompts to install 2 temporary hanging screws by telling us the measurements to the bottom of the top rails. After temporarily distributing and hanging, we go back and screw all panels to posts, removing that temporary screw. In this case, one person installed, and one installed final screws.
@demig67 Ай бұрын
What is the gripper that is used to carry the panels?
@fencegenius Ай бұрын
Its a Bessey Panel Carrier. They work fantastic!
@jjooeegg1 Ай бұрын
How odd they never show how it fastens to the posts ????? Fire your advertising team
@fencegenius Ай бұрын
We pre drill each of the rails and screw the rails to the posts. Didn't think that's something people would stick around to watch lol.
@wigggles420 Ай бұрын
Great job
@fencegenius Ай бұрын
Thank you. It is really the software that enables the quality. Every panel is prefabricated offsite to fit every unique post-to-post location.
@wigggles420 2 ай бұрын
I just died 💀 🤣 😭 😂
@fencegenius Ай бұрын
Haha we laughed too. This customer insisted his landscaping crew set the posts so they were all out of whack. Made it more difficult but never the less prevailed.
@josiahjack455 2 ай бұрын
Have yall ever done 1x4 on both sides so both faves are identical or is the support simply not enough? Thinking about doing a 4ft high fence in identical style to this.
@MrEricknudsen 2 ай бұрын
Thanks for your question. If you’re referring to Nominal 1x4 WRC Trim, with Actual dimensions 5/8x3-1/2 or 4 in our case, no, this would not be enough support structurally. (Even for a 4’ tall fence.) If perhaps you are using a true 3/4x4 Actual size, when you double that by applying to both sides I would guess it may hold up OK for a 4’ tall fence. Assuming proper knot structure and nailing process. But not something we would ever do. Both sides of our fences are equally as attractive. And the screws are uniformly placed in the rails to post location so they are also aesthetically pleasing. Thanks for watching
@rubiksman001 2 ай бұрын
Thats a beautiful fence. How did you attach the panels to the posts?
@MrEricknudsen 2 ай бұрын
We pre drill 2 pilot holes in every rail end during prefabrication and as we take the panels off the trailer we conveniently pre set the screws before carrying to the installation location. On the posts we have a temporary screw set based on the software algorithms direction, which also dictates the post cutoff height, to rest the top rail of the panel on, temporarily supporting the panels. Then once all panels are set, we come back to fine adjust and screw the #10, 4” long exterior screws into the posts.
@shaynepeters6048 2 ай бұрын
How did you get all the gaps between the posts exactly even?
@fencegenius 2 ай бұрын
Great question. With the Fence Genius software, posts do not need to be exactly even. Rather after the posts are set, we measure the distance apart, any grade change, amount of post available, and any post to post rotation. From that point the software calculates a solution, and prompts us how to fabricate it offsite in a controlled environment with better tooling.
@user-wd6dn7lb9o 2 ай бұрын
He's making a career move
@ApexFencing1 3 ай бұрын
What wood did you fabricate the panels out of ?
@fencegenius 3 ай бұрын
100% Western Red Cedar. (Alta #1-2 Face Boards) This system was unstained, but we frequently pre-stain custom colors and finishes before we fabricate.
@fencegenius 26 күн бұрын
100% Western Red Cedar
@pattybarnes6499 3 ай бұрын
Every city and state worker that comes up by my house just stares at my fence and tells me how beautiful it is 😁 I've seen a couple people taking pictures by it, so if your name isn't on it I have no problem with you putting your name on it. You have changed my life for the better. Thank you ❤️❤️
@fencegenius 3 ай бұрын
That is so nice to hear Patty and we are so thankful you let us build your fence for you. It did add a nice bit of security and a lot of curb appeal to your house! And thank you for both this comment and the wonderful Google review you did that unfortunately Google deleted… (It seems to happen to most of our reviews) Andrew and I are discussing getting Fence Signs to put up, so thank you for the option to install one. Keep in touch and Thanks again!
@grheryford 3 ай бұрын
Looks good! I like the dark posts with the contrasting light fence panels.
@fencegenius 3 ай бұрын
We really like them as well. The customer in this instance went ahead and stained them after they were installed but while we were away and building the panels offsite. Turned out great
@andrewknudsen7969 4 ай бұрын
Feel like I am back in 2010 watching a How Its Made video lol
@keithtom6286 5 ай бұрын
how are you securing the panels to the posts?
@fencegenius 5 ай бұрын
Hi Keith. We use 2 pcs 4" - #10 Deck Screws per rail and one pc same down through the cap into the post to help stop post twist. We initially hang the panels on temporary screws set at the dimensions the software tells us to from the rough post top. (Before it is cut to height)
@phineusphineas 6 ай бұрын
Link to tools would be a good addition. The measuring stick you used looked like a useful tool but I couldn't find it online.
@cheeseymccheese7249 6 ай бұрын
Beauty but you installed your gate handle in the wrong spot, should be over the latch to make it a one handed job (hand in the handle also flips the latch open)
@simonfootie6255 7 ай бұрын
Awful
@fencegenius 7 ай бұрын
Just curious what is awful? Is there a question we can answer?
@dougstuart1568 8 ай бұрын
I am the homeowner of this property. Could not have been happier with the job that was done
@fencegenius 8 ай бұрын
Thank You Doug! It was a pleasure designing and building your fence for you and your wife. MyFence.com makes perfection happen by using the power of our Fence Genius Technology and Software and by fabricating each Custom Shaped Fence Panel OffSite, in a climate controlled environment with floor based equipment. Thank you!
@doublej5045 8 ай бұрын
Mexican workers
@fencegenius 8 ай бұрын
The Hispanic helpers were unknown to us but the Homeowner that had us Fabricate the fence had them install the posts and they wanted to learn how to use the system so the Homeowner paid them to assist with the install. They were a great help and were very impressed with the ease with which the system went together.
@tagenclift3893 9 ай бұрын
Fence Genius is top-notch! They're way more efficient than traditional fencing companies. Highly recommend checking them out!
@MrEricknudsen 9 ай бұрын
Thanks for the comment. By producing offsite using a software generated workflow provided by the Fence Genius software and technology, MyFence.com can provide higher quality products with more predictable outcomes and consumer clarity than typical On-Site construction methods. MyFence.com is gaining many happy customers using Fence Genius and at competitive costs!
@user-vf1oo3cs3b 9 ай бұрын
Didn’t realize these panels could be repaired replaced.
@fencegenius 9 ай бұрын
All fence panels are data. So if anything ever goes wrong, it’s as simple as re ordering the panel number in your system!
@user-vf1oo3cs3b 9 ай бұрын
Really like this fencing. Fast and accurate. Amazing !
@fencegenius 9 ай бұрын
Thank you!
@FackitAllman 9 ай бұрын
How do you cut the 2x4's when they go up a hill like that? If there's a topcap, how do you measure the angles for the trim? TYTY
@andrewknudsen7969 11 ай бұрын
A few accurate measurements makes all the hard work easy!
@taqacej7044 11 ай бұрын
Very cool tech! Makes it look easy and efficient.
@taqacej7044 Жыл бұрын
Great system, looks incredible!
@fencegenius Жыл бұрын
Thank you! A little technology to augment skill and enable contractors to do more work offsite can go a long ways!
@andrewknudsen7969 Жыл бұрын
It was a great install! Looking forward to the next one
@fencegenius Жыл бұрын
Working with the two helpers that had no idea what they were going to do and their expressions when they were done so quickly was fun also!
@Crazy85quirrel Жыл бұрын
Wow, that is amazing! Look at how smooth the fence-line is. Crazy that software was able to make those fence panels look so good, especially that small one. Keep up the good work!
@fencegenius Жыл бұрын
Thank you for the comment! Just another walk in the park for the Fence Genius software!
@andrewknudsen7969 Жыл бұрын
That is a darn good fence right there!
@fencegenius Жыл бұрын
Yes it is!
@andrewknudsen7969 Жыл бұрын
Great demonstration with the bump bar. Offsite production has benefits in nearly every manner!
@andrewknudsen7969 Жыл бұрын
I had a great time attending Fence Tech and talking with so many contractors. It was very motivating to have people who chalked it up to a bunch of BS, to then coming back with their friends in amazement with what the Fence Genius solution can bring to their company!
@andrewknudsen7969 Жыл бұрын
Another great walk through!
@fencegenius Жыл бұрын
Seems a bit blurry when first uploaded but it will clear up in a couple hours
@andrewknudsen7969 Жыл бұрын
Great walk through!
@davidb9025 Жыл бұрын
How to over complicat something so easy. Demonstrate on the ground and posts you have already.
@fencegenius Жыл бұрын
Hi Dave. Thanks for watching our video. Yeah, I probably go into too many tertiary aspects in the video and for that I apologize. Bottom line: 1) Establish a level line. 2) Reach down and measure distance apart and record. 3) Measure level line down to the lowest potential for wood and record. 4) Measure level line up and record. 5) Measure angle IF needed. We do this frequently and about a minute per panel invested in measuring brings many benefits with software and that time is offset with saved time on the install process. Thanks for watching.
@davidb9025 Жыл бұрын
@@fencegenius Just demonstrate on a fence itself, far more practical and easy for a novice 👍🏽
@malcolmthomas2695 11 ай бұрын
z
@janellaaustin564 Жыл бұрын
Is there a metal version?
@fencegenius Жыл бұрын
Hi Janella. Sorry I missed your question. Currently, Fence Genius is focused on Wood Only. In the next year or two we will bring in Ornamental and Vinyl. Thanks for your question and for watching the video.
@randylewis8626 Жыл бұрын
really a bucket?
@fencegenius Жыл бұрын
Hey Randy. Thanks for your comment and for watching. I'm training an existing crew how to use the Fence Genius software and system. Not how to use their typical tools. They have their ways of doing things. I preferred the ladder approach myself, but everyone has their ways...
@fencegenius Жыл бұрын
There is a video with all 16 panels sped up
@fencegenius Жыл бұрын
An important note: These posts were set by the contractor over a week before I measured and built on them. They sat daily in 80 to 90 degree heat. During the measuring process, the post to post distance apart is measured low to the ground, So even if the post has moved/bowed some, for the most part it will flex back during install. If it is bad enough not to, you probably would want to replace it anyway. Regarding the measuring methods, there are a number of approaches, enbaled by anything from a Laser Level to a hand level zip tied to a straight rail to a ZipLevel. The measuring relies on establishing a horizontal plane along the post line. Measurer puts a small, discrete mark on the post in the level plane. Then software has user measure the lower portion of the post and input then the upper portion of the post and input. User measures distance apart low to the ground from post corner to post corner on the Rail Side and any rotation angle gets measured at this point relative to that line.
@fencegenius Жыл бұрын
It's important to point out these are each custom shaped to fit the terrain between pre-installed 4x4 posts. Our Fence Genius software assists the user in the design of the system, but then for a nominal cost per foot enables this pre-manufacturing offsite to happen. This increases safety and efficiency, decreases waste, and results in better finished product. (And the builder isn't putting the lumber in the mud and dirt as they build) While this is an incredibly basic fence, Fence Genius can enable highly custom panels such as board or gap patterns, horizontal lattice, or arch type panels to be built using our software algorithms to create the finished contours and augment skill.