Thank you, but for me I stragglers to connect inside

Thanks ❤

Thank you very much, just did exactly what you put on here and my cooker is on.

i got extra white wire where does tjhat go

what if i have a white wire red green and blue where does white go

Thanks so much! no more begging of my lazy man! done it all bymyself :) !

Am probably being blond but I have a bush freestanding cooker came with no cable, ordered a cable but it won't fit under nor stay down with screws. Is 10mm cable too thick?

If my electric cable earth isn’t covered with the yellow and green cable cover, but is in between the blue and brown and all coved with the grey wires cover ,can you still use it?

What mm2 wire do I need for a 9000W appliance? (It splits it into 13A 3000W three times)

mine only has two copper connectors, both sides at the top 2 screws

What if earth isn't coated can still use it?? Got wire from sparky on site

My cooker pole has 6 wires 2x blue , 2 x earth 1 brown and 1 black how does that work

You can also use a 10mm cable for a cooker

Could be my eyes but yhe brown live wire looks like its going into top left hole not middle left..🤔

If I was going to pay over £100 for a qualified sparky to install my cooker I wouldn't be on here watching Vids of how to do it myself 😂

Your video has helped me fixed for someone. Most important thing here is i got my daily bread from your video. God richerly bless you with more 🙏.

Gg

محتاج الروزيتا ديه من اين اجيبها

محتاج الروزيتا ديه من اين اجيبها

محتاج الروزيتا ديه اجابها من اين

Thanks for the upload . Subbed!!

If the nail underneath is not okay with me, I think it is lost, what should I do? Many thanks

It is important that all electrical appliances are installed by suitably qualified person registered with a competent person scam ? Wrong there is no legal requirement for any one to be registered with a competent person scam or to-be qualified . You clearly are not qualified or competent, as you have mentioned nothing about tightening the terminal screws to the manufacturers required torque setting or electrical testing the cooker before switching the power back on, ie continuity ie R1+R2 and insulation resistance test. And to complete a minor works certificate to certify that the install is safe. and what safe isolation and locking of the MCB then test to prove the circuit is dead . I have been an qualified electrician for thirty three years so I know you are talking rubbish. Do the job right or leave it to the professionals. Also you have put out a video showing the general home owner how to install and connect an electric cooker, and you mentioned nothing about safe isolation and proving the circuit is dead by testing it with a GS38 approved two pole voltage indicator and locking off the circuit MCB RCBO. And what about filling out a mirror works certificate. .what a pilchard.

This is quite simply the WORST connection box on the market, do not buy this cooker as your Electrician will want to kick the shite out of you by the time he's finished connecting it

AO want £90 to do this job, and it's £90 I just don't have, so this video is ideal thanks 👍

Curry’s charge £95 for 5 minutes work installing fee 🤬🤬

Thanks you sir🙏🙏🙏

I just needed to know how to take the black box and open it was a mystery until I went underneath 😂 thanks for the video

Ive just bought a BUSH BESAW50B and im finding it extremely difficult to install. Ive tried and 2 other people have tried. we just can't get the wires in the tiny holes! stressed

What wire did you use for installation mate as old cooker ran on 10mm twin earth but this wont fit into new cooker and upon reading instruction doesnt clarify which wire to use ?

Hi I got a smeg electric hob without cable can you please explain me where I have to connect the live and neutral and earth cable please

thanks m8 you just saved me £55.00

I’ve just purchased bush betaw50b cooker and I haven’t got a clue what I’m Looking at but doesn’t seem to have come with a wire to connect cooker to the wall. Where can I purchase one from and what will I need?

Mine looks nothing like that

Hi i just one to ask you please I have hotpoint cooker per aprire over heated and melted it is it possible to put deferent brand on it please

called out an electrician but it cost £180. A few days later it wasn’t working so called them back but had only forgot to switch the switch on the wall . Damn ! They billed £150 just for coming out and flicking a wall switch. Total cost £330 .

Thank youuuu almost wasted my chicken

Thank you for help 🤕

Thank you

He is wrong about using 6mm cable .10mm is the correct cable to use under recent regulations

Thank you for making this video, saved me quite a bit of money:)

thanks 👍👍👌👌🌷🌷❤❤

Helpful instructions

Exactly what i was looking for too. Very helpful, clear instructions...Thank you.

What do we call the U shape copper inside please, the one on the video... thank you

I bought a new cooker the wires on older one are black. Red. Green and yellow are these old wires there a ppain to get in to the new terminals should i get new ones

Exactly what I was looking for, thank you!

Does it matter which live or neutral connection. 123

Heyy man thanks a lot this video really helped thanks man

BIG THANK YOU