Tomcat Airguns

Пікірлер

@michaelbrown8153 19 күн бұрын

How long are the legs please?

@Atoyota25 19 күн бұрын

About 35" from tip of foot to center of main tube.

@michaelbrown8153 19 күн бұрын

Thanks I am in the uk and making one for myself.

@PracticingLiberty 24 күн бұрын

Use a thick pin or a sewing needle to poke the existing ring in the middle then pry out and discard. Its much easier.

@Atoyota25 23 күн бұрын

Good tip! I STILL forget about doing that, to this day! lol

@magoo21127 Ай бұрын

dude, your camera is to far away and you should slow down. other than that great video

@Atoyota25 Ай бұрын

I can appreciate that! I was still learning back then. Hope the video helped you!

@michaelageyev9864 Ай бұрын

How did you put a bipod on it? There is no information online, I’d like to mount one on mine.

@Atoyota25 Ай бұрын

I have a video on that too. Search my channel. If you can't find it, leave another message and I'll figure out a link for you.

@michaelageyev9864 27 күн бұрын

@ thanks! The video video I found was this one: kzbin.info/www/bejne/hIavmK13mLuVY8Usi=Hxdnx0XL-lO5VFSK It looks like you installed a rail first, then bought a picatinny rail bipod for it. I thought it was a sling stud bipod. Do you recommend installing a rail and going the route you did? Thanks, Michael

@juniorlink4448 Ай бұрын

After you find optical zero do you also take of the buttons and placed them back with the 0 on the dot?

@Atoyota25 Ай бұрын

Yes, if possible, and if that zero is your goal. Otherwise, shoot the rifle and reset the zero to whatever distance you want it to be.

@daviddellariva Ай бұрын

I have a FFP Vortex scope and I cannot see anything except the main reticle no matter what I do even with illuminating the reticle. Any help with be appreciated

@Atoyota25 Ай бұрын

Have you tried the spin method? I think that might be in part 2.

@juniorlink4448 Ай бұрын

The spin method is also ideal, But does this also make sense for mounts that are not adjustable?

@Atoyota25 Ай бұрын

"does this also useless"??? If the scope has turrets that can move the reticle then, this should work well.

@juniorlink4448 Ай бұрын

@@Atoyota25 It was a bad translation i have adjust the text :)

@Atoyota25 Ай бұрын

@@juniorlink4448 Ok, so, in the case where the mounts are not adjustable, this probably would not make much sense to do. Its only purpose would be to show you how far away from optical zero you are.

@lindatheriot8456 Ай бұрын

Hi Tom. What is your reg. Set at. BTW great video as always

@Atoyota25 Ай бұрын

That was quite some time ago. I don't recall what it was set at on that rifle. It was a sweet little shooter though!

@jp92704 Ай бұрын

I like the design and overall quality of the Accu-tac bipods. I will be getting at least one. However, correct me if I am wrong, but it appears that the cant and pan adjustment levers are made of plastic and are not covered under warranty. Those are critical parts. Everything else on the bipods except the rubber feet are metal, why not those levers? Why not under warranty?

@Atoyota25 Ай бұрын

They are plastic. I couldn't say about the warranty but, I've never had any issue with them. I hear your concern though.

@gerardo1560 Ай бұрын

Your one funny guy whitch one guoonna give the steel from the barrel or the rod..... Hahaha i didn't know steel gave

@gerardo1560 Ай бұрын

He walked that one down

@gerardo1560 Ай бұрын

Why not use the old cleaning materials.alcahol

@joehebbo7047 2 ай бұрын

Only the barrel should be clean what about put some gun oil on the barrel outside to protect it and on the mechanism ?

@NathanBrantley 2 ай бұрын

DIY patchworm in a pinch: weed eater string, roll a dab of hot glue size of pellet. Works unbelievably well and you can make multiple

@RaysAirgunsReview 3 ай бұрын

where can i acquire those adapters?? ive got the Air Venturi 74 cu ft bottle which has the DIN...the regulator i bought is the HUMA DUAL GAUGE INLINE REGULATOR( bit more pricier, but shows input and output, latest, greatest model i think..Or Should i just screw the dual gauge regulator on the bottle? i guess with the model i bought i can refill the bottle through the regulator..Plus, since my tank has the DIN fitting, can i install this with pressure in the tank since i have the on/ off knob on top of tank and bleed valve on the side??

@Atoyota25 3 ай бұрын

I got mine from Airguns of Arizona. I have not heard of a regulator that CAN allow filling. All regulators I have seen are one way only. Triple check before you try it! I'd recommend giving AOA a call. Their staff is very knowledgeable and will be happy to help you out.

@Arjan-ue9xn 4 ай бұрын

I would love to see the accuracy results, with an already regulated rifle, and at a 100 yards/meter.

@LarsUlander-i3e 4 ай бұрын

Thanks for a great review. Would you pick PC-4 before FC-4? Is it stable enough for precision shooting? One benefit is that it is narrower and perhaps therefore more versatile?

@JackSmith-jj3bi 4 ай бұрын

I have the Accu-Tac Gen 2 cradle style. Been with me since they came out. I use it in combination with rear bag riser that I custom built for my KRG X-Ray stock. I can set the legs on the legs. Then micro adjust crosshairs to the bull. Thanks Accu-Tac for such solid quality gear.

@myronp243 4 ай бұрын

Clean your pellets l.Empty the can and you will see small specks of lead dust..There are different ways,choose the one that suits you.

@Neo-RSA007 4 ай бұрын

This turned out to be super helpful. Thank you ❤

@Atoyota25 4 ай бұрын

Terrific! Glad to have helped!

@pastorczo13 4 ай бұрын

Gam O Not Game O

@Melskeh 5 ай бұрын

Love this thanks

@RoyanaHaque 5 ай бұрын

Wilson Margaret White Melissa Martin Betty

@Tyrant_Popper 5 ай бұрын

I’ve been looking at almost all of these metal resetting hunter field targets and I must say that combining this Gamo targets hit zone system with the crosman or highland resetting targets paddle system would be the best of both worlds. The highland targets resetting paddle is in the center of its body so your resetting shot would also be a kill zone practice shot compared to the crosman squirrel where the resetting paddle is below the targets silhouette. In concept all it would take is buying the two separate systems and to drill a hole above or below the paddle hole on the target. Then toss the metal rings in to restrict the bullseye as you wish and bingo, no more string pulling and you always have the option to restrict the bullseye. 🤷🏻‍♂️

@francessteele 5 ай бұрын

I was looking for this specific video on how to you these patches because I just bought them however wasn't sure how to use it even tho I had an idea how to. But you just clear everything up for me. Thanks for the informative video.. 👍

@Atoyota25 5 ай бұрын

You're very welcome! Thank you!

@skrik7212 6 ай бұрын

why is going opposite direction with the rod? no bore guide??

@MidwestPicker 6 ай бұрын

@2:25 every time you poked that target with your finger, I was waiting for it to explode 🤣

@gazwandsoxthedog5111 6 ай бұрын

Thanks for the excellent review, you've just cost me £330 🤣

@newagediscovery8710 6 ай бұрын

Definitely great to know which is a better fidget spinner 😂

@Atoyota25 6 ай бұрын

LOL! Hope you enjoyed the video as much as I enjoyed making it!

@carlmorton2556 6 ай бұрын

25 mins for a 5 minute job

@Atoyota25 6 ай бұрын

Yeah, isn't it nice that it's so detailed for people that don't know what to do

@hoss1988 6 ай бұрын

Im glad theres still good ole country boys doin stuff like this, thanks

@colonelcalabash1 7 ай бұрын

Just got a new air rifle and thanks for the advice. Also just liked and subscribed to your channel.

@Atoyota25 7 ай бұрын

Thanks! Which rifle did you go with?

@37gdog 7 ай бұрын

I have a JC Higgins 126.2831 that is missing parts, do you know if the the Crosman 180 parts fit that model also?

@frufru0071 7 ай бұрын

This was a fantastic review. Great stuff! Thanks very much for sharing this with us.🙏🏻🇨🇦 I have just got my first Accu-Tac, (FC5-G2), which I think will be the last bipod I ever buy. They’re a lot more expensive to buy with our lowly Canadian dollar, BUT as you’ve made abundantly clear-ANY other bipod looks and feels like they were made from cheap material, by slave labourers for a low price-dare I say "cheap"? Harris, Atlas…I’m shocked by the humongous difference in quality. You can see it and feel it. I bought Accu-Tac’s "Sling Stud Rail Adapter"-again not cheap but it’s built to last generations! If more people knew they could get an adapter made by ACCU-TAC for ACCU-TAC Bipods to use on a rifle that has no Picatinny Rail, they would choose to. I have done a lot of work to find out that there’s a simple solution.

@Atoyota25 7 ай бұрын

Wonderful! Yeah, the Accu-Tac's came out on top in my "Top Picks" video as well. I compare bipods within 3 different price ranges and pick my top 3. I'm really glad my video was helpful and really appreciate the compliment! It was a lot of work making all these bipod videos! LOL!

@johnfink9782 8 ай бұрын

Can you please tell me where you got parts for your gun

@stevenrowe5047 8 ай бұрын

Thanks Tom for the great video. My problem is it needs to shoot a little faster. I bought mine about a year and a half ago. My main concern is that when I have it on high it has an average 925fps with .22 caliber 14.3gr pellets. When I turn it to medium it drops to 620fps and when I go to low it is 430fps. What could be causing that? Thank you for your time.

@Atoyota25 8 ай бұрын

Hi Steven, Have you tried the 18gr pellets? The Royale's have always been a fan of those. 18's at about 905-910 (IIRC) is magic! How fast are you looking to go? If you break the speed of sound, there's a good chance you'll see your groups open up. Regarding your question, there is a balance between the regulator and the hammer spring adjuster (Part #D2) If you have adjusted your hammer spring already, you may have pushed it too far? If you've adjusted your regulator, without a reg tester, it may be set too low. (A regulator tester is the ONLY way to accurately adjust those regulators.) Be advised, the hammer spring adjuster has loc-tite on it! You have to heat it up to break the loc-tite loose or you'll strip the hex key hole. A side option might be to grab a HUMA regulator from AoA. I've been thinking about picking one up for my loaner R400. 2 reasons... 1) It's HUMA which means it's quality 2) It has adjustment marks on it so, no need for a reg tester. I'd post this question on Airgun Nation. You'll have advice coming from all over the world from people with huge amounts of knowledge about this.

@stevenrowe5047 8 ай бұрын

@@Atoyota25 thank you. I do also shoot the 18gr but the fastest they will go is 830fps. I like to shoot them at around 930fps. I wish it was as easy to adjust as my crown, impact m3, the king or the alpha wolf. My red wolf pushes the 18gr at 980 on low. I will check out that website you suggested. Thanks again.

@moenuffyoyo1885 8 ай бұрын

I'm sold thabk you brother 😊🙏

@mmgee 8 ай бұрын

My system for a Ruger 1022, I use the white jag and a 1 1/8” Pro-shot patch wet with synthetic gun oil. A package of 1000 pro shot patches is the same money as 100 patch worm felt. 😊

@EduardoVarela-qn6in 8 ай бұрын

Ay alguna forma de aserlo de monicion calibre 22

@chemicallust77 9 ай бұрын

Where did you get that ammo box with the compartments in the lid?

@Atoyota25 9 ай бұрын

I think, maybe, Wal-mart. But, it's a "Plano" box. I bet you'd find it with a google search.

@Atoyota25 9 ай бұрын

Actually, I think I got it at Bass Pro Shops many years ago. here's a link to it on the Plano site...www.planooutdoors.com/fieldammo-box-1592575

@chemicallust77 9 ай бұрын

@@Atoyota25 Sweet...thanks for the follow up

@No1JetDoc 9 ай бұрын

The accu-tac FC-5 G2 has cant now.

@danh9225 10 ай бұрын

So if you get consistency when the barrel is 'Leaded in' why are you removing it?

@Atoyota25 10 ай бұрын

Well, naturally, there will be an extreme on the other end of the scale... too much leading.

@TheRforestr 10 ай бұрын

Where can I buy this system as it is no longer shown at Target Forge.

@Atoyota25 10 ай бұрын

Sadly, Bill had to close his shop. Search for AR500 KYL target and I'm sure you'll find something comparable.