Nice work! can someone please tell me if a F32 trunk cover is suitable for a F82 trunk?
@jianyuanzhang1550Күн бұрын
nice work! Can someone please tell me if the trunk cover of a F32 can be fitted to a F82 M4? are they the same?
@ronniep92722 күн бұрын
The M3 handles like a go kart compared to the F30. It's an amazing car.
@BigRat-fc1uq17 күн бұрын
wish i could afford one 😢 stuck with a regular 340ix
@EldridgeCortes17 күн бұрын
Mines just a 440 🤷🏻♂️
@BigRat-fc1uq16 күн бұрын
@@EldridgeCortes no it’s not just a 440i, i like coupes and the 440i is also the closest to an m4. you also have a great build on it which makes me wish for one more
@noseegsb4marriage18 күн бұрын
I checked out your video on My.IS forums about the tick/click sounds after ignition, I got the same problem right now even on warm engine but it goes away in a few seconds, was it caused by a bad or wornout valves? Or probably piston w/rods?
@Brendan-g9w13 күн бұрын
@@EldridgeCortesHow long did you personally drive the car with that noise? The guy before me replaced the water pump and timing belt and my car is making the same exact noise. I just am trying to gauge how safe it is to drive with the noise
@EldridgeCortes5 күн бұрын
@@Brendan-g9w at least a year with me and then another year with someone else until I lost track of it. I got on it plenty of times and it ran fine but it was annoying to hear and I think that’s why I decided to sell the car. You could always make your exhaust loud enough to mask the sound but it’s all up to you
@EldridgeCortes5 күн бұрын
@@noseegsb4marriage Honestly no idea. The sound wasn’t there until someone did the timing belt. Ended up selling the car but the car was running fine for 2 years after and then sold somewhere else and lost track on who got it (accidentally deleted this comment so reposting it)
@jimmd6818 күн бұрын
If you're 16.
@bruttt219 күн бұрын
Tpms sensor always on.
@EldridgeCortes17 күн бұрын
I bought new sensors from someone that shouldn’t require any programming but that didn’t work lol. Have yet to see if I can get them programmed to the car or unless they’re faulty. 😣
@sammysam261519 күн бұрын
Randomly speeding? Ok.....
@JMTB1019 күн бұрын
Under the bridge the sound of your car is amplified so they always do a pull through there
@dogeland51418 күн бұрын
car go loud vroom
@user-zd7sp1em7k19 күн бұрын
is that oklahoma?
@vinceraniero121719 күн бұрын
Nah nc
@alpha_13_omega23 күн бұрын
On point 👌👍
@Leonel107128 күн бұрын
Carnal podrías compartir el link de donde compraste los rear fenders o el panel trasero? Quiero Comprar un e46 para hacer el mismo proyecto que el tuyo.. Saludos nuevo suscriptor 🤟
@abdiadam630828 күн бұрын
Do you have to remove original parts or just overlay it???
@EldridgeCortes28 күн бұрын
it was an overlay
@altaice3960Ай бұрын
what was the code that was saying gas cap?
@TjClarkishАй бұрын
What shop did you have it done at? I live in charlotte!
@EldridgeCortes28 күн бұрын
WRG
@nickavilez3515Ай бұрын
Love it would love to do mine
@fpsliamj2406Ай бұрын
Damn bro goes hard
@EldridgeCortes28 күн бұрын
thanks!
@joebiscuit2005Ай бұрын
Do you have link bro?
@dnlmvcАй бұрын
Hey man absolutely love the build! By chance are you selling any 440i badges for the m4 seats?
@EldridgeCortes28 күн бұрын
im not but I just wrapped them myself in vinyl
@frankieb2220Ай бұрын
Looks Sick Bro 💯 😎
@ForceFedАй бұрын
Didn't think the yellow would look that good against the blue, but it works beautifully!
@bigsmalltiny159Ай бұрын
such a clean build!
@EldridgeCortesАй бұрын
thanks!
@harjassingh9357Ай бұрын
I miss my snapper rocks blue sooo bad 😞
@jillianmccainАй бұрын
Thank you so much! ❤
@SportGuyDMVАй бұрын
I installed the vrsf catless downpipe on my 435i tuned it to stage 2. Talk about performance gain. Went from 300hp to 360hp. So fun to drive. But be aware when you get the catless dp the smell is pretty strong at least for my car. I see a lot of KZbinrs down play it but the smell is strong. And if your state does emissions testing you're obviously going to fail. So if it's your daily and you put a catless dp you'll run into some issues. Just something to think about. I think I will save up and get a high flow catted dp in the future. But going back to stock dp and flashing it back to stage 1
@IdeaGarage3Ай бұрын
What company did you purchase the spoiler from?
@EldridgeCortesАй бұрын
I mentioned it in the beginning of the video 🙃
@BigRat-fc1uqАй бұрын
is this a 440i or a m4? looks very nice 👍
@EldridgeCortesАй бұрын
It’s a 440 with OEM m4 front end and custom quarter panels
@BigRat-fc1uqАй бұрын
@@EldridgeCortes i’ve been looking at the 440i coupe and why are they so expensive for no reason! i really want one but might end up with a 17’ bmw 340ix 🫠
@EldridgeCortesАй бұрын
@@BigRat-fc1uq the 4 series have usually always been a bit more than the 3 but when it comes to the F8x Ms. the sedans hold better value than the coupes, its weird lol.
@ryanlim466Ай бұрын
Hey man I was thinking bout buying a 440i gran coupe and was wondering how much it costed to put all these mods into your car?
@EldridgeCortesАй бұрын
I stopped keeping track to be honest since it’s a car I don’t plan on selling. But if you want to duplicate this build exactly with all the parts including body work, paint, similar style wheels and everything else that this car has then you need about 15k, give or take. The quarter panel body work and paint up front and in the rear was the most expensive thing here for me. Some times I wonder if I should have just wrapped it myself but the paint color looks too good to not keep and that was my main reason to even start this project because you can’t find and M4 in this color. But aside from that.. I have an individual car to me for the price of what an avg spec near stock 2018 M4 is selling for.
@namcox40Ай бұрын
did it come pre painted or you had to get it painted afterwards?
@EldridgeCortesАй бұрын
You have to get it painted
@tropicanaken3557Ай бұрын
hey I have a question on your front bumper fangs is that a oem m4 bumper or aftermarket bumper ? trying to find fangs that fit f32 m4 style bumper
@EldridgeCortesАй бұрын
It’s OEM
@turbospoolАй бұрын
looks awesome! very clean
@ForceFedАй бұрын
That Vescaa radiator support looks great! Nice little upgrade there.
@threetreewoodworks4200Ай бұрын
Very nice carbon parts. I am looking to get some VESCAA parts for my BMW as well.
@enigmo08Ай бұрын
Don’t mean to sound like a hater… but this piece isn’t something you’d want to replace for a full carbon one. It would be better to have it skinned in carbon. That piece holds together several front end components like the headlights top bracket and the inner quarters. If you were to get into an accident with this piece vs the factory metal brace, it would just shear instead of deflecting energy. Which means more front end damage (possibly pushing the motor further back) and make alignment harder for a body shop to get the rest of the front end within factory spec. The weight savings of this piece are not worth your life/more damage. It also seems like a red flag if you cannot tighten the bolts down within oem specs since the piece would crack from just that (so imagine in an accident). I would hate to see that happen to you, your vehicle or anyone purchasing this product. It even says it on their site “for show only” and not to use it for any motorsports activities, this piece might have enough flex from the chassis to crack it. I think it would be best to start with this disclaimer before promoting the install.
@vescaaАй бұрын
Great install video. It's a pleasure working with you on this project!
@EldridgeCortesАй бұрын
🙏🏽🙏🏽
@aymanchaoui257Ай бұрын
That looks really clean !!
@beefiddy8Ай бұрын
Love the "M Faux!"
@M240WaheedАй бұрын
Awesome build man, I wish they had the rear flares for the f22 chassis
@Richestmanintheworld395Ай бұрын
Those rear arches are soo fire, you just had a shop put them on? Was it pretty straight forward ? Also do you think an 18x11 et25 would fit nice or nah
@Richestmanintheworld395Ай бұрын
Im thinking that would fit nice but want your opinion since u have the arches and 11” wheels
@SaturdayWinterАй бұрын
Do a cost breakdown
@ernestolagunes20842 ай бұрын
Thanks for this info I was getting worried 😅
@bingoplayer2 ай бұрын
Need center caps!!
@muhkolia2 ай бұрын
Too clean
@SampleDeezeNutz2 ай бұрын
Sheeesh. She Sittin fat. I need that m5 bumper but don’t trust anybody online selling. Where did you get yours?
@daniel-jb9ju2 ай бұрын
Beautiful build man , what are those wheel specs ??
@EldridgeCortes2 ай бұрын
Thanks, they’re 9.5 +16 and 11 +17
@daniel-jb9ju2 ай бұрын
What’s the wheel specs? Gorgeous build tho!
@ronniep92722 ай бұрын
I wish this colour was available on the M3 and M4, it's stunning.
@nimbus.f362 ай бұрын
What are your wheel specs bro?! 🔥
@EldridgeCortes2 ай бұрын
I could give them to you but they won’t really fit your f36 just so you know
@nimbus.f362 ай бұрын
@@EldridgeCortes Hmm what specs would you recommend for my 440i, I saw your video that you explained everything on your car and saw you have different fenders so I was wondering if I should run a squared set up or not
@EldridgeCortes2 ай бұрын
@@nimbus.f36 i might make a short video to explain since I’m getting these questions a lot and it’s a good amount to type lol