@@AvithOrtega Just PWM on auto I think.

@@Glob3Tech thanks!

Depends how well you can use them. Indeed, it would be nice 200mpx on each lens/focal point.

@@MAR1ANA-h4m I don't see why not.

@@baconfloppa8785 Fans, rgb, fan hub etc? Yes.

@@aswinrajeev515 If it fits and doesn't get in the way, yeah.

@@pats9738 Hm sounds like the drive is corrupted or hope not,dead. Any chance to try a new sata cable/m.2 slot etc?

@@kapone2k Thanks! And did my method work?

@@Glob3Tech Sorry no, it doesn't launch in to windows at all to begin with, this is why I try to format it from outside of Windows, I have also tried various linux distrubs and none of them see's the partition but it finds a storage device (and no it ain't the booted usb I am talking about)

@@kapone2k Oh wow, yeah, a tough one. I mean I had the Phantom Canyon NUC but I had the freedom to do anything to the drives. The only issue I had was wgen windoes decided to auto encrypt the C drive. Forgot about it and I vould never clone the drive for example. Let me know if you solve it in the end. What model of drive is it btw?

@@Glob3Tech I have no idea, but it's a Dell NUC I got from work for free because no one could get it to even start. I got that part done, I consider to get a M.2 disc and just replace it.

@@kapone2k Could be some wierd dell encryption, I expect anything from them. Yeah, a fresh m.2 👍

@@scalamasterelectros3204 Indeed! 😎🍻

@@nicjolas You want both guiding the air in the same direction. 👍

@@Glob3Tech thanks!!!! :))

@@104Woodworks Cheers man, thank you 😁 Glad it helped

@@alphajovz4154 So glad to hear that! Thank you as well. 🤗

@@CryptoFeedersI had a look but tricky. Looking from the main side, I see some space underneath that front tray next to the PSU shroud. One can go in there. The other 2 can go next to the PSU, if that isn't too long and your cable management is on point. Either improvise something like this dual cage or anything that will fit. amzn.to/3Z0vDi9 A lot of ifs if you want them.hidden. otherwise, have them at the front on top of the PSU shroud. Good luck.

@@Glob3Tech over psu shroud, how to connect HDD there? can we attach there HDD directly, I mean wo this amzn product?

@@CryptoFeeders It should have fan holes there on a mesh design. Secure them there. Don't know if that dual cage will not get in the way of the gpu etc

@@yoble25 Hm, maybe the upgraded kit Torx one from Noctua? It's been a while since I did thst video so don't have the U14S anynore to further test.

@@Glob3Tech I was just looking at their site NM-M1-MP78 kit should suffice and can be used 90 degree rotation. if provided with copy of invoice at least MBO or CPU with picture of Noctua and paper with your name and date they send it for free. That is if cooler was bought before 2019. Customer service at its finest for one of the best coolers i ever had

@@yoble25 Indeed! Glad it worked out.

@@tlwong6752 Hi there. I think so, it has the button at the back to activate the hybrid mode. Don't have the PSU anymore to double check.

@@45eno Very nice! Indeed. For my personal PCs, I do the same, get them second hand. Currently have the NZXT H1 V1.

@@ereder1476 Hm, not that strong. It will bend I think, if just on the pannel. If the weight would be distributed more on the structure as you said, it should be ok with a normal monitor.

@@Glob3Tech ok, thanks for the info!

@@DeridderEvelien Nice! Yeah, those were such fun times. One day I really want to quad sli 480s 😅 just for the fun of it. By the time I found 2 on ebay, the 3rd was dead or the 1st would die 😅

@@Shan_Artss Same here. 😁

@@DennizjeMusic Nice one, thank you. Glad it helped.

@@charleyweinhardt You could try but I think the bios on those will be limited in terms of acces to the full list of ram timings and subtimings.

It's been very interesting working with the legion go, I have it running in Windows 10 fully debloated, got it down to 60 processes. It's a fun thing to play with. So there is a program called smokeless that allows you to access the timings, and there's a guy named technosaur on KZbin that's had a lot of success, only he's got a guide for Samsung DDR5, and i have hynix DDR5. However i seem to be reading that hynix DDR5 or a die is better at tweaking then Samsung... Very limited information out there for all these things lol. Any chance you might be interested in this? Not sure how much you're gaming but I am running lies of P add a custom resolution of 1100 P getting 90FPS with hi settings, upscaling to 1600 P it's a lot of fun to mess with. Anyway cheers thanks for the quick response 👍👍

@@FotoServiciosPtyYou and me both. Only had the camera for a day so had to make the most of it.

@@powersource1988 Indeed.

@@Glob3Tech All adjustable though. I am currently looking for a nice case for in the living room. I am most concerned about functionality and cooling (thus noise) over esthetics. Its gonna go into a cabinet, but when we use it the door can be open. If you have any tips or suggestions sir! Thanks in advance

@@powersource1988 If you are going for an ATX build and this case fits your cabinet, yes, it's a good choice. Plus you are after a silent build, you can swap out the fans anyway. For this flat layout, don't know many other variants. I myself prefer the tower/monolith approach like the NZXT H1 or the Silverstone Alta G1M. I covered the Alta on the channel as well. Just because I like the small footprint vertically.

@@ghostshield4000 😆

@@M4DLC B-die for ddr4 are the best chips available, quality wise. This means higher MHz and lower latency at the same time, out of the box. I'm currently running Trident Z 3600 MHz CL14 32GB which help a lot in the minium fps and higher averages numbers for most games when compared to a 3600 CL16 or cl18 kit. Plenty of charts on KZbin. Yes, expensive but it's up to you if they are worth it either new or on the secondary markets. For AMD don't go higher than 3600 MHz though since it will affect the internal latency of the infinity fabric especially on ryzen 3000 and 5000. If on Intel, whatever you can get sonce the 12,13 and 14th gen can accept either ddr4 or ddr5, depending on the motherboard. The discussion can go multiple ways since it depends at what prices you find what you are after.

@@Glob3Tech thank you very much for this answer, market in egypt unfortunately only offers specific stuff which forces us, i been searching for at least 3600 cl 16 but it's just not here so had to stick with the basic 3200 cl16 thing since my 13400f only supports up to 3200 i suppose. but please if you can help me with this info it would be very appreciated, I'm seeking an asus prime b760m-k d4 mobo since it's very affordable here and since many said it's better to stick with b760 mobos with 13400f, but I can't find any reviews of this mobo and I saw some people say it's vrm and heatsinks are bad, so I'm worried about this part affecting the 13400f capabilities in anyway, idc much about features really just a mobo that runs fine without any heat problems, etc. specially that I'm not an overcloking user anyway. And thank you very much again!

@@M4DLC Sure no worries. I understand, that's why I mentioned it's all relative to availability. Had a quick look at the particular mobo. Overall user reviews, at least from UK seem fine for stock usage. Plus your cpu is rated for 65w tdp and with boost to under 150w if cooling permits. If you have minimal airflow in your case, you will be fine as long as the cpu is properly cooled. I don't overclock myself, I undervolt to have even more piece of mind. So yeah. Good luck and let me know how it goes.

@@Glob3Tech That's good to hear, I'm looking to get an anubis pro case which is an etx case with 3 160 fans support at the front so i suppose airflow would be fine, sticking with the stock cooler that comes with the cpu tho but hopefully would upgrade to a decent cooler in some time, so i think your 2 safety notes should be checked, thank you a thousand again for your help, i truly appreciate it. Wish you a good evening brother :)) ❤️

@@M4DLC Proper stuff, that sounds excellent. Likewise 🤗

@@rasoopa5629 Yeah... I'm afraid they're gone :/

@@Mojo_DK Absolute best, the Phanteks T30s. Over 7mmh2o. But 5mm thicker. amzn.to/3zwjqXT

You can tune the cpu to work at a lower wattage through the nuc software and in return the gpu will be lower as well a bit. I think I had mine at 25w for the gpu and the gpu stayed stock.

So far has been ok. 🤞

Hi. Since they used that 3400ge cpu on this generation, it should work as a direct swap if all motherboards are the same. But I never tried it. I would suggest that you would ask here as well. forums.lenovo.com/searchpage/tab/posts?fid=1308&q=M75q%20cpu%20upgrade&sort=best_match Good luck 👍

Chỉ trông giống nhau với điều kiện ánh sáng tốt, tuy vậy các góc ảnh vẫn mờ hơn sony. Tôi đã thử thấy nó tương đương máy ảnh 24mpx (NikonZ6II) và thua xa Nikon Z7II khi tôi thử nghiệm. Nhìn chung camphone tốt nhưng vẫn còn khoảng cách rất xa procam.

Just SFX-L and SFX. That divider wall is in the way.

They are such cool modern art furniture 😁