Eddie M

Пікірлер

@tortureyou 3 күн бұрын

One bidding tip I suggest is the entry point and bid increments. When it was 3250 on 2nd unit , a bid of 3500 may have taken it since 3250 took the first one. Waiting for the 3500 bid and then bidding 3750 may have cost ya another 300 with fees. I always try to bid first rather than later since they add time anyways.

@tortureyou 3 күн бұрын

American attachment and small equipment companies should be very worried. I go to Richie Bros auctions all the time and the amount of these machines are literally oversaturating the market. If you do a search by auction results its really hard to believe how many have been bought, all new. Consolidators buy cargo containers full of them and have major auctionhouses like Ritchie Bros blow them out. In a couple years these will be selling for a third of the price.

@Orvillehuit33 4 күн бұрын

Beats doing it by hand

@cameroncarlyle3697 7 күн бұрын

Junk! Ive been dealing with chinese built equipment for 9 years. That is a cheap knock off chinese engine on that unit. YOu can hear the engine bogging down big time during normal operation. look at how you put the gas into the machine. There is no fuel cap? on the exterior that is easy to access?

@96marrufo 7 күн бұрын

I’ve been very happy with the knock off 420cc engines. It’s got plenty of power for the size of the machine and It’s actually given me less trouble than some B&S engines. The fuel fill is not handy but I have a fuel caddy with a pump so filling up is really easy for me. For the amount of work it has saved my back I have no complaints.

@OneWheelTwoSkis 14 күн бұрын

Really picks up a minute in. Great production my guy!

@stevenervin4113 16 күн бұрын

Look at upgrading the shaft of the motor to their "one" shaft they are prone to stripping sprockets and leaving you stranded!

@96marrufo 16 күн бұрын

Thanks for the heads up!

@deej7783 16 күн бұрын

Let's go great video bro💯👊

@randyotts2491 17 күн бұрын

LMAO brother. The rearview shots of the jumps were wicked! Good video!

@randyotts2491 17 күн бұрын

The wife and I had ebikes while camping. The speeds and torque of these things is surprising. Good video.

@randyotts2491 17 күн бұрын

Love watching the skid at work. Good job brother.

@mikedesilets3324 17 күн бұрын

I just got a mini skid from auction too. I'm on 1 acre and can't justify a high-end skid. Looks like yours is already paying for itself. Nice work. The asphalt looks great.

@96marrufo 15 күн бұрын

Thank you, totally agree! This skid will serve me well for my 1 acre lot too!

@deej7783 18 күн бұрын

Hey bro keeep recording and pushing forward enjoying your passions. Just hit record on anything your doing. Some vidoes will hit and somw may not. Put the mini loaders to work the pressure washer the mowers all of it we will watch. Great energy my friend 💯👊

@deej7783 18 күн бұрын

Iove to read the comments, also get a kick from all the Critics😂😂😂 cool little machines not much balls but im sure they can help around the yard

@eddie3314 19 күн бұрын

How did they move it with no oil

@96marrufo 18 күн бұрын

With very large loaders with forks, they just pick them up and set them down.

@98682bobbyd 23 күн бұрын

I got mine a couple weeks ago and like it so far. If you look on the opposite side of where the water goes in, it looks like there is a siphon port for soap. I can't find anything online about this and nothing is mentioned in the owners manual.

@96marrufo 20 күн бұрын

I believe that is a pressure relief, I’ve seen water come out of it after sometime of not pulling the trigger.

@98682bobbyd 15 күн бұрын

@@96marrufo Hi Eddie. Thanks so much for the response. After getting in touch with Husqvarna's technical staff, your answer was confirmed. The gentleman told me that if you're going to leave the machine idling, it's best to turn off and restart when ready to pressure wash. I was actually blown away by the expertise and patience of the person I spoke with. I absolutely love my new pressure washer. Take care and thanks again.

@ExodiaX5 9 күн бұрын

I found myself facing that same issue! Thanks so much for confirming!😊

@mikeanderson7206 25 күн бұрын

Tip number 3 after 4wd and park brake incase your back tires come up put blocks under the stern of your trailer or jack stands help

@Orvillehuit33 27 күн бұрын

Thanks for showing the troubles .. it let’s me come better prepared when I get mine .. what city were you in

@96marrufo 27 күн бұрын

No problem this was the Longmont Colorado location

@randyotts2491 29 күн бұрын

Did the auction house check the engine oil levels before running the engines to position the equipment? Just curious.

@96marrufo 29 күн бұрын

No the auction doesn’t turn on the machines. They move them around with huge front end loaders and pallet forks. The keys are secured with steel wire to handlebars.

@fishaman7834 Ай бұрын

I been thinking about buying one of these for some small projects around the farm.. how much did you pay for them and how have they worked out for you??

@96marrufo Ай бұрын

They are worth it! One of my videos has the bidding and shows what some of them went for and how much I paid (not including taxes and fees).

@kevinthorrington2131 Ай бұрын

Briggs and Stratton is having their engines made in china. Maybe that's the problem! My John Deere Briggs engine is made in china.

@Renoman86 Ай бұрын

You need to strap the buckets also!

@Oakst113 Ай бұрын

Im in Colorado we should ride sometime. if you ever want to trade for a e-skateboard (Onsera black carve)

@jtsokiehobbyandadventures6666 Ай бұрын

I have gopro. Dont like because of over heating and not being able to just use a batter to recharge why recording. Could not get past the over heating problem was the worst problem tho.

@96marrufo Ай бұрын

Yeah I’m figuring out that recording in 4K overheats faster than 1080p

@nadiequeyosepa Ай бұрын

This is nice bro! Keep doing videos!

@monsieurbacteria2314 Ай бұрын

Yo! This is actually a great video, well done. Keep it up!

@TheTundercat222 Ай бұрын

its a ripper..

@OneWheelTwoSkis Ай бұрын

This is Awesome! Great intro and drone work!. The trail is so smoooooooth! It looks fun!

@simsmr691 Ай бұрын

Great video, thanks for sharing the RB experience with us.

@96marrufo Ай бұрын

Thanks!

@user-ye2fu6wr9y Ай бұрын

If you got any old engine drives sitting around I’m trying to get a rig started(willing to fix up if needed) I’m a pipe welder for the local 72 in ATL but trying to get to the pipe line