Пікірлер
@lt200420 2 күн бұрын
Cool man. When I was a Cub Scout in the late 80s/early 90s I had a small blue SAK but I don't think it was the Classic SD as I'm almost positive it only had the blade and no other tools. Would you know what it was called? I just bought a Classic SD in yellow at Walmart and I'm loving it. Gotta gets the Compact or Explorer next.
@ephemeralnihilist 12 күн бұрын
Nice beach blade ❤ I use mine as a shower blade 😅
@Youtube-Censorship-Police 20 күн бұрын
i have 2 of them (both 3") and i agree on the detent being a bit mushy (though it isn't a "real" detent in the classical sense anyway, it reminds me a bit of an axis-lock, feel wise). it takes a while to figure out the right angle for a spydie-flick but it's possible. like you i have no issues with the blade "falling" open and personally i think it is a great knife, it's robust, slim, easy to carry and the relatively slim blade stock makes for a great cutter. the only thing i would change are the scales, they could use a bit more grip in my opinion.
@morgizmo87 22 күн бұрын
Nice! Recently picked up a rambler and havent put it down. What a great tool.
@saltylawaia8958 Ай бұрын
Did it develop any blade play? And how’s the bearings holding up. Seen a video on how quality is and been curious
@kzine2000 Ай бұрын
You made an excellent comment about the placement of the main blade on the SD classic, which I’ve found to be very inconvenient. And that’s one of the main reasons I went with the rambler. Having the blade AND the scissors opposite the ring is wonderful and changes the whole usability of it.
@Chris-oy4nk Ай бұрын
My pivot came stripped out and I can’t find a replacement/upgrade can anyone help me out?
@LrdwEDC Ай бұрын
@@Chris-oy4nk I would contact Civivi. I would guess they would only charge you shipping and send you out replacement parts. However, whenever I contact a manufacturer, I always offer to pay for the part, if it was my error, ie i lost it or stripped it. If it came new out box with a problem, they should just confirm which knife so they get the part right, and send it out.
@piterdead7550 Ай бұрын
hello what oil do you use for your knives?
@LrdwEDC Ай бұрын
@@piterdead7550 i have a few faves. Break free clp for bearings and washers Break Free CLP Cleaner Lubricant... www.amazon.com/dp/B0050GWAVG?ref=ppx_pop_mob_ap_share KPL Heavy for detent balls, and slip joints. a.co/d/i7UEwF3
@LrdwEDC Ай бұрын
And thanks for watching and commenting!
@harunomiya Ай бұрын
This is definitely an awesome gift. Congratulations to your son.
@LrdwEDC Ай бұрын
He loves this one for sure! Thanks for watching and commenting.
@wadmez Ай бұрын
Why do you think the Finn Wolf pocket knife is cheaper than the Verdict, while the blade is longer there, and the material is, in principle, better. What do you think set the prices?
@LrdwEDC Ай бұрын
@@wadmez I would guess it’s because the verdict falls into the the Goldilocks zone for edc with blade length 3 inches and below. Also it is thinner, lighter, and has a deep carry pocket club. Blade geometry is better suited for every day tasks. The Finn wolf seems to be better suited for outdoors/bushcraft. I haven’t personally added one, but it looks cool, and I would like to try a Scandi grind.
@wadmez Ай бұрын
@@LrdwEDC What is the goldilocks zone? Could you elaborate?
@LrdwEDC Ай бұрын
@@wadmez in areas that have regulation on knife blade length, most, but not all will allow for up to a 3 inch length. Obviously, there are some areas that are more restrictive, so your mileage may vary.
@Acorn_in_Florida 2 ай бұрын
Thank you for sharing, now pardon me, I'm about to empty my wallet on one right now
@LrdwEDC Ай бұрын
@@Acorn_in_Florida you’ll not be disappointed. The Red E really exemplifies the concept of the Little Big knife. I did pick up the red E nano, but considering it doesn’t have the sculpted handles, it really doesn’t feel as solid in hand. Have fun. Thanks for watching and commenting, really helps.
@tracker_bishop 2 ай бұрын
Looks awesome. I would change out the thumb studs too. Maybe some red thumb studs
@LrdwEDC Ай бұрын
Good call, pretty sure any bugout thumb stud fits. Thanks for watching and commenting!
@keithhastings 2 ай бұрын
I love the customization. I know the Lander scales and scale screws are easily swapped out, but what about the rest of the hardware? Easy or painful?
@LrdwEDC Ай бұрын
Super easy. They also sell full hardware kits. Thanks for watching and commenting!
@Andy-M.1833 2 ай бұрын
Gread Combo! Mine is the Tinker with the sd classic Alox
@LrdwEDC Ай бұрын
Love the tactile feel of the alox, and the classy look! Thanks for watching and commenting.
@toolsgear2695 2 ай бұрын
My OCD is going crazy!! Red with red, and blue with blue. 😆😆😆
@LrdwEDC Ай бұрын
I hear you, me too! Somehow it just works in my brain. Thanks for watching and commenting.
@HalmHammerhand 2 ай бұрын
Does yours have any side to side blade play? Mine won’t get anywhere need drop shut unless I loosen the pivot to the point of developing side to side play.
@LrdwEDC 2 ай бұрын
No blade play at all, rock solid. I would do a full disassembly, clean up, and lube the bearings. Hopefully it will resolve the issue.
@HalmHammerhand 2 ай бұрын
@@LrdwEDC thanks for the reply. I disassembled it last night and didn’t see anything obvious. I tightened the pivot just until the blade was centered. When I say play I mean it takes a small amount of force at the tip to feel it move. Just wiggling it doesn’t do anything. Especially near the pivot.
@LrdwEDC 2 ай бұрын
Does it have play with the frame lock disengaged, say at half closed with lock bar still pressed away from the tang, or is it just in the lock open position?
@HalmHammerhand 2 ай бұрын
@@LrdwEDC No there’s no pivot lash half way. It’s definitely more noticeable with it all the way open and the frame lock disengaged though. If I tighten the pivot till it stops it takes some healthy shakes to close it.
@LrdwEDC 2 ай бұрын
That is disappointing for sure. Maybe smooth out the tang where the bearings run with some fitz polish. Other ideas would be consider bearings replacement with skiff or taco to see if that allows better action with tighter pivot, or just tighten that sucker down with some locktight, and flick it repeatedly until bearings create a nice tract and it breaks in. With the weight of that blade it should be droppy pretty quick 😊
@LrdwEDC 3 ай бұрын
OK, so I noticed the typo. The steel is 14C28N, not 14c27. 😂
@unitedstatesirie7431 3 ай бұрын
I am going to buy a Victorinox 'RAMBLER' and then I am going to remove the knife from it so I can take this Victorinox onto airplanes ✈
@LrdwEDC 3 ай бұрын
Why not a Jetsetter?
@la_old_salt2241 3 ай бұрын
If I only had one, my OCD says black, but my heart likes the blue. 🙂 By the same token, the Classic SD and Rambler are so inexpensive you can have multiples with all sorts of color variations. Neat little blade.
@LrdwEDC 3 ай бұрын
Totally agree, multiples are fun!
@gcvrsa 3 ай бұрын
The Rambler is my favorite model, and it's my most-used knife. It has everything I actually need in an EDC utility knife, and nothing I don't. Where did you get those blue accessories? I've never seen them before, and I really want a lanyard like that.
@LrdwEDC 3 ай бұрын
I get most of the accessories at knifecenter, just search for victorinox blue and sort low to high. Thanks for watching and commenting!
@rOymOnd421 3 ай бұрын
I used to have one of those multitool's when I was a little kid 😢
@LrdwEDC 3 ай бұрын
It is super crazy cool! Thanks for watching and commenting!
@harveydixon7705 3 ай бұрын
That second one looks really cool
@LrdwEDC 3 ай бұрын
It is crazy cool for sure! Thanks for watching and commenting.
@CitizenSmith50 3 ай бұрын
Knives like the second, made in Japan, were popular with the Boy Scouts here in Australia in the 50s/60s !
@LrdwEDC 3 ай бұрын
Interesting! Thanks for letting me know, and thanks for watching and commenting!
@robertbarker5802 4 ай бұрын
I want to love mine but the lock up isn't tight. It has a bit of up and down wiggle.
@LrdwEDC 3 ай бұрын
Lock up should be rock solid. I would do a full breakdown, cleanup, and rebuild. Perhaps just a slight misalignment of scales and hardware. Otherwise as the lock breaks in, the design ensures lockup should improve, not worsen.
@sumanngon 4 ай бұрын
White makes it easy to find...if it falls out of hand!
@LrdwEDC 4 ай бұрын
So true, I have been looking at a white Hunter specifically dor that reason. Thanks for watching and commenting!
@brians.4488 4 ай бұрын
Dude u fast foward thru the tricky part!!
@LrdwEDC 4 ай бұрын
Sorry about that. Most viewers complain if i show the entire process in real time. I can definitely drop a full vid on the next axis lock breakdown. Thanks for watching and commenting.
@oceanwater6887 4 ай бұрын
Do u like the verdict or the mini recon? What’s your verdict?
@LrdwEDC 4 ай бұрын
Well the mini Recon is iconic, but I have not had one in hand. The handle looks nicely done, but it does appear to set you further back from the blade. Thanks for watching and commenting.
@GastonGarciaO 4 ай бұрын
Fenomenal
@LrdwEDC 4 ай бұрын
Thanks for watching and commenting.
@frosty-hq3hc 4 ай бұрын
The little main street is a must need!!!
@LrdwEDC 4 ай бұрын
Thanks for watching and commenting!
@IR4TE 4 ай бұрын
I wish they had an alox version of the Rambler, that would never leave my keychain ever again
@LrdwEDC 4 ай бұрын
Agreed!
@DownHillCol 3 ай бұрын
I was just thinking the same!
@andrewbertubin7634 4 ай бұрын
Is the h1 or h2 steel better?
@LrdwEDC 4 ай бұрын
According to knifesteelnerds, the steel change to H2 was not necessarily an improvement on H1. It appears to be more due to steel availability, and the need to use a different steel manufacturer that resulted in a slight composition change, and therefore a new name. knifesteelnerds.com/2022/06/06/h2-steel-h1-the-sequel/
@hounds760 5 ай бұрын
I have ultem scales on mine soo light it feels cheap i love it hahahah
@LrdwEDC 4 ай бұрын
The lexan clear scales by Original Goat are nice also.
@LrdwEDC 2 ай бұрын
And now Hogue has released an OEM lexan scale model!
@Pourage_art 5 ай бұрын
Kids did well 👏🏼
@LrdwEDC 4 ай бұрын
Agreed, thanks for watching and commenting.
@jamesgomez8035 5 ай бұрын
EDCs are the best, I can't go without my EDC
@LrdwEDC 5 ай бұрын
Agreed! Thanks for watching and commenting.
@Nostalgholic 5 ай бұрын
Looks awesome!
@LrdwEDC 5 ай бұрын
Thanks for watching and commenting! This is a really good full-size button lock, that comes in at a budget price. Adding the updated scales just takes it to the next level.
@pokerriot1 6 ай бұрын
Mine came with extra springs for adjustment. FYI. Rock solid out of the box
@LrdwEDC 6 ай бұрын
Sounds like they have worked out the kinks, and adding extra springs is a great idea. Glad it is solid. I have a Little Main Street on the way, so this gives me hope! Thanks for watching and commenting.
@Sam_T2000 6 ай бұрын
I need this in a 74mm frame… and possibly with the “orange peeler” from the MiniChamp, and one other tool… maybe something new, like a letter opener?
@LrdwEDC 6 ай бұрын
That sounds awesome! Thanks for watching and commenting.
@la_old_salt2241 3 ай бұрын
The main cutting blade IS your letter opener.
@Sam_T2000 3 ай бұрын
@@la_old_salt2241 - I know a knife can open a letter, but it’s not exactly a “letter opener.” such a tool could also be used for opening packages, cleaning underneath nails, if the actual nail file has the screwdriver on it… basically, the point would be to keep the blade sharp for when you really need it to be 🤷🏻♂️
@crowone464 6 ай бұрын
Lucky
@LrdwEDC 6 ай бұрын
Thanks for watching and commenting!
@rm2jjc11 7 ай бұрын
That handle looks awesome! Where do I get one?
@LrdwEDC 6 ай бұрын
Thanks for watching and commenting. Here is a link… whitemountainknives.com/mikkel-willumsen-red-e-axis-folding-knife-black-tan-sculpted-g10-handle-14c28n-plain-tan-blade-wlmre21tta/
@rustyshackleford5331 7 ай бұрын
Those washers have to break in, unlike bearings. Once they do break in, your action should be smooth as glass.
@LrdwEDC 6 ай бұрын
Hey, thanks for commenting. You are absolutely correct. It is already getting very smooth.
@Robert_Thomas832 7 ай бұрын
Don't lose your bearings or it's a potential wash out 😁
@LrdwEDC 6 ай бұрын
Thanks for washing and commenting!
@sirweihowe1005 7 ай бұрын
Thanks for giving it a go! Im glad it helped improve the action a little. I believe you're right on the money about the narrow range of perfect tightness coming from friction of the washers and the spring tension of the Omega springs. Here's hoping that there is an omega spring out there that will give the bar lock more 'oomph' when sucking the blade back in. Cheers!
@LrdwEDC 7 ай бұрын
Couple more spring trial vids coming down the tract. FYI Kansept now has replacement springs, coupled with the washers, it is pretty sweet.
@rayjrdibenedetto867 7 ай бұрын
Good morning. Just watched your video and enjoyed it and like the scales and everything-wondering what that cost if you don’t mind me asking? Thank you and have a good day
@LrdwEDC 7 ай бұрын
Thanks for watching! The Lynch NW Mod Kit was about 120 at the time. Current versions appear to be between 150-160, here is the link…www.lynchnw.com/spyderco-delica-4-lynchnw-mod-2-titanium-scale-kits
@rayjrdibenedetto867 7 ай бұрын
@@LrdwEDC Hi. Thank you for getting back to me! I really appreciate it. Have a good day
@LrdwEDC 7 ай бұрын
You’re welcome, if you try the scales out, you are sure to be pleased.
@red19841984 7 ай бұрын
I was gifted an arcade but in green,bead blasted it off and had my buddy cerakote sit for me.great Awsome knife prefer it over my ad20.5.
@LrdwEDC 7 ай бұрын
That sounds awesome! Thanks for watching and commenting.
@rigby6734 7 ай бұрын
That’s a clean knife bro. Looks good!
@LrdwEDC 7 ай бұрын
Thanks, the Ti inserts are pretty nice, and have a great texture. Thanks for watching and commenting!
@adammcguinness9950 7 ай бұрын
The Penguin is so good. I have one on me today at work.
@LrdwEDC 7 ай бұрын
You know sadly I still have not carried the g10 variety, the Ti just seems so good. Thanks for watching and commenting!
@adammcguinness9950 7 ай бұрын
I have 10 Penguins, 7 carbon fibre, one brass, one denim micarta and a titanium version. I’ve only carried the denim micarta one. I bent the bloody clip today. All fixed now though.
@LrdwEDC 7 ай бұрын
Wow! That is a a flock of penguins! I think they call that a waddle.
@johnsanford3596 7 ай бұрын
I sincerely hope that Demko or Flytanium brings out a Sharklock knife with a 3.5" blade. And with decent style. The Arcade's handle looks about the same as a dull but fancy utility knife handle.
@LrdwEDC 7 ай бұрын
That handle is maybe lacking flash, but the neutral handle is quite comfortable in multiple grips. I am with you on the need for larger. Not that anyone can find, nor can I afford, but the AD20I and AD20S are definitely larger. Thanks for watching and commenting.
@sumanngon 8 ай бұрын
Wherever I look for it shows out of stock!
@LrdwEDC 7 ай бұрын
A few options for in-stock: www.knifecenter.com/item/VN06363033X1/victorinox-swiss-army-rambler-multi-tool-red-228-closed-old-sku-54031 smkw.com/victorinox-swiss-army-rambler-red Victorinox Rambler Swiss Army www.victorinox.com/en-US/Products/Swiss-Army-Knives/Small-Pocket-Knives/Rambler/p/0.6363
@SavedbyGraceAlone84 8 ай бұрын
I put a small rare earth magnet inside. Glued it to one side of the G10 in the factory scale slots. 2 bucks from harbor freight. Added some detent. It's now my perfect knife.
@LrdwEDC 8 ай бұрын
Wow, that is an amazing idea! I will definitely pursue that. I have a Kansept Main Street that needs some serious detent help. This could really help. Thanks for watching and commenting!
@SavedbyGraceAlone84 8 ай бұрын
@@LrdwEDC Yeah I was thinking of making a video but I don't have a channel. It's actually super easy and you can just tear down the knife like you would a cleanup. Took all of 2 extra minutes while I was cleaning the knife.
@LrdwEDC 7 ай бұрын
That is super cool, would love to see a vid or some pics.
@mutstumbo 8 ай бұрын
Nice looking knife. Thanks for sharing.
@LrdwEDC 8 ай бұрын
Thank you, and thanks for watching and commenting!