Hey thank you. But is the light suppose to stay red?

I bought this it's works well I have ran a stove a freezer a Fridge TV cell phones

Yes, but where is it made? I don't want anything made in China.

Wow that's some really bad advice. 100 hours of runtime in between oil changes?! You guys really don't want your machines to last at all huh? The first 5-6 hrs of runtime to allow the wearing process to happen, change out that oil, and then every 25 hours of runtime maybe 50hrs if conditions are ideal using synthetic oil. 100 hours... that engine will be blown up for sure, or heavily worn to the point it's burning massive amounts of oil.

where can I purchase the recoil for a Firman H07553 439cc ohv

Excellent video! My Firman is a couple years old and I've never connected used it except for maintenance cycles and the carb is clogged from bad gas. I'm gonna use this video to clean it out when it warms up this weekend! Thank you!

My Furman generator Burns about as much oil as it does gas. I'm not impressed

is this a pure sine wave generator? I need clean electricity for welding

Hello, I bought one a few years ago and after assembling it i set it aside and about a month ago i added oil then started it but after testing it the air cleaner cover didn't stay snapped shut si i checked further and the air cleaner metal plate was bent and its bent in the areas where the screws go. Are there replacement parts since its out of warrenty even though its like new. Also after setting running theres bolts and nuts falling off. Looks to me they could be engine mount bolts.

How do you add a trickle charger to one of those little inverter batteries with tabs?

Great video,I wish they had a amp draw display just like the hrs/hz/voltage that gives someone some kind of how much of load you have drawing on output of the outlet, How about making it less noisy maybe to 60 dbs and Also why not make a Inverter generator so the hz won't hurt critical equipment that needs the hz stable.

Alguien me puede ayudar con una respuesta ¿Cuál es la diferencia entre la T07573 y la T07553??? Gracias.

THIS COMPANY NOT WORTH BUYING ,,,WASTE OF YOUR DOLLARS

CO SENSOR FAILED ,RUNS FOR THREE SECONDS THEN SHUT OFF ,,1000,00 DOLLAR MISTAKE

MY UNIT FAILED SEVEN DAYS INTO AFTERMATH OF HURRICANE,, DESTROYING MY FOOD SUPPLY ALL OVER AGAIN STILL WAITING ON CALL ON WHERE TO GET IT FIXED

THIS GENERATOR IS 💩💩💩💩,,,PAID A THOUSAND DOLLARS RAN NEW UNIT FOR FOUR DAYS FOUR HOURS ON AND ONE HOUR OFF!!!ON THE FOURDAY UNIT STOPPED RUNNING ,WOULD CRANK AND RUN FOR THREE SECONDS AND DIED ,,,NO HELP FROM CUSTOMER SERVICE,, STILL SITTING WITH W PILE OF 💩💩💩💩 NOT KNOWING WHERE TO GET IT REPAIRED!!!

I don't think I will buy the brand again because of the difficulty of removing and replacing the battery on Firman Inverter generators. There needs to be an access door just for the battery. I have 3 Firman generators. 1 is gas and propane, the other 2 are gas only.

thank you very much for this. I have the VFO and AVR+Brushes being shippped to me soon and need to replace them on my T08071 Tri-Fuel. Now I see what need to be done.

can you make a vid showing how to troubleshoot the 1200 model, last time i used it, it worked fine, 8 months later we lost power the other night and i tried to run it to power the tv for the wife and me, and it would only light up a led rope light, nothing else - when i metered it on voltmeter was getting 13.5 to 18.5 v on both outlets, i opened the cover and there is no visible avr on the 1200 model, so hopefully will be more simple to diagnose and hopefully fix as i cant afford a new one anytime soon and we have been losing power almost every other week. - many thanks in advance ! hoping its something in-expensive like the voltage regulator

"We're all about safety" but no gloves to protect hands from gasoline exposure.

sad thing is that you mention that we can call to get carb parts, when I called to inquire about the float valve spring, I was told I had to buy the whole carb as firman didn't have internal parts.

These generators are junk. I have two and receptacles don't hold cords plugged in any more, and the generator is just 2 years old. Can't use my power tools because cords won't stay plugged in.

I have a wh03242 and all it does is idle I figured out the stepper motor was not working I installed a new stepper motor but still it does not work can you help please

Question, I’m about to wire the generator to the house, are Firman generators bounded or float?

Followed these instructions on my T07571 and it’s running like new again

Coming from the same guy that sponsored nkla. Firman out of respect pick someone with a better track record.

But why? Zero details given. Imagine your mechanics giving you those generic details while maintain your helicopters.

Ok cool. Heavy D Sparks. Where’s the rest of the video?

It was a great presentation, but missed a lot of key points. Kinda like the instruction manual.

Looks very well made. But didn’t start on the first pull start up. Runs very nice. I’m happy so far. The instructions really need some work. Like points of interest. Most of the instructions look like they were done by a 3rd grader. More pictures with no instructions. Like simple brake in time on engine. Or when to change the oil. Or how to read the digital display. Or when to turn on off switches on or off when starting. All done in pictures. It’s like Firman put all of their money into making a great product and then skimmed on the instruction manual. One would think,you would get more for $1000 unit.

Well, I guess - love is love. Some guys like girls, and some guys like gasoline powered engines …

Is it common for the unit to produce 270 volts with things already plugged into it? If not, what is my issue?

Which gauge extension cord do I need to use for the GFCI?

I call customer service they don't answer

Please someone help

I don't know why my don't want start in gas

Can you retrofit the Costco Firman Generator Item 1900555 Model T07573 with a remote start?

Just bought this!! My first generation here in NC after hurricane Helene. Any recommendations for this generator is appreciated. Plugs, extension cords, oil, ect.

Thank you for the video Firman! We purchased 3 in the last 48 hours due to Hurricane Helene devastating impact in Georgia. This generator is worth the money (every penny) and very simple. This Video is accurate! Very simple to unbox and get it started. Under 10 mins!

I have a Furman dual fuel model h07553, If I want to run natural gas in it do I have to change anything or just get the natural gas hose you guys offer Thank you

Can you switch from propane to gas without turning the generator off. Thank you Steve

What size is the oil plug bolt? This is not mentioned.

Do you have a specific carburetor that I could order on Amazon?

I love my Firman generator. I bought 2 & would recommend Firman to others.

Biggest problem for T07571 is there is no shut off. So carbs will get gunk up all the time. I’ll have to add one on mine.

P03618

W EXCELLENT video. The female moderator as the PERFECT questions.

Bonjour, pouvez-vous me montrer les trois gasket s’il vous plaît

HA! Mine had 6 and NOT easy!

Would not buy any of these compact models as they are a royal PIA if you have to perform any maintenance on them, which will always be the case at some point. Changing oil was not easy, battery replacement was a challenge. Now I'm trying to clean my carburetor and see that I have to take all of the generator housing off before I can first remove the whole carb before I can then access the bolt that holds the bowl in place. My first encounter with Firman support was lousy as well - a person on their chat that ghosted me, my phone call answered by someone who barely spoke English and never e-mailed me the document that he said that he would, and I've received no response to my on-line submission.