Simply remove the trim....and then I decided to buy elecbrakes

Who ever shot this video has no idea

They need an electric release system so you can press a button and release the hitch for ditches , driveways and the like.

Well it's either pay 400 bucks to have it fitted or work out what this bloke is talking about 😂

Nice to see Cam out & about! 😉

Do you make a hitch for a 120kg ball weight caravan?

I have mine set in the lowest hole on the shank and need to go lower still, how do I overcome that?

where can i get a copy of the form to fill in to level up our car and caravan. Any help would be appreciated

An timely answer to "carfiftyfour" below would be nice......

Were do u find them plugs on a trailblazer 2019 plz

This didn't explain anything.

Hi I have one installed in my Rexton, branded SSangyong, It does not appear to be working correctly in that I have to have it full sensitivity and full Boost to even start to feel it and marginally more when I press the boost button . Any suggestions on how to get to operate correctly

Hi there, holden colorados from factory sit lower at the front than the rear. When setting up this kit in this situation, do we aim for level vehicle height or restoring the forward leaning factory stance?

Can your your tow bars be purchased in America or be ordered and shipped to America?

Hiw do i know where to set these knobs to start with for a 17ft caravan ? Also should the knobs just fall off in my hand ? Or arnt they on properly?

Can I use any hole in the drop shank for the receiver pin, to extend the tow ball away from the tow vehicle slightly

Thank for the instructions... however I have had no luck finding the manual on the HR site for a Nissan Navara Ute D23 2020. Can you provide a link please?

Thank you very much, this was very informative.

Hi Mr Heymann Reese could you please tell me how many newton metres should I tighten those adjustable bowl ? Thanks 🙏

Hi guys, just a quick question as there are plenty of self appointed experts out there and I've had various opinions. Do you recommend the likes of a friction grease on the bars at the hitch end. I have heard plenty of squeaks from hitches as the tow vehicle manouvers. Same question about grease on the towball. Cheers and thanks. Stu

Can the tongue be safely shortened to fit a Ford ranger tow bar. The second hole for pin to secure would be good. Can the strange indent be cut off.

Hey guys did you develop (back in the 80s) a slide in lazy axle?

bull shit where is one to suit a navara d40

Hi guys can you use your system with a D035 coupling

Can I ask why you would adjust the ball height using the cam plates over just using the multiple holes in the drop shank?

Got caught on the hard wiring of the blue wire at the rear.

Thanks

What’s the actual weight of the bar? It’s not listed on your website

It would be nice to have a better explaination on how the two dials work. The top dial adjusts the brake force of the trailer but what is the boost dial? Is this the adjustment to manual override force?

This is just a commercial... fuck off

Hey guys. I have located the blue connector at the back but don't have a small black connector. Do I need to connect this? Or is it an either or thing?

We use. And recommend the XBAR at TuffEnuf4Cruisin

I have a cushion the electric brakes only works with the brake controller?, I dont have a break controller in my truck and the electric brakes in my trailer does not work.

So why does this video show different results on same test? kzbin.info/www/bejne/jnO9pmZvpbZrfck

I connected mine like you did but I noticed there is no ignition wire. The brake controller is always on even with car turned off. Or can the guardian IQ somehow turn off?

Thank you very much very helpful made it soo much easier and definitely and u buy them brand new and don’t get instructions lol !!

thank you for detail video

He keeps saying “Simply”. This installation stopped being simple the moment he opened the panels and exposed the interior wiring, then to cut brake wires and shit? Nah man, I ain’t about to have one of those “Final destination” moments man.

I’m after a brake controller and looking at the compact iq, I have a Hayman Reese towbar on a 2019 triton and found the smart link blue plug but can’t find for the life of me that smaller black plug. I got the tow bar installed though ARB. Do they not all come with with this black plug?

Your electric brakè install showed none of the running under the vehicle with wires or front of cab.?0 Not a good instruction!!!! How about some good shots of the wiring from the front to the back totaly thanks

For the people complaining that it is "their" product, I have seen tests from other people and every one shows the WDH coming out on top of the airbags. The WDH distributes the weight...which you want. The air bags only address the sag in the back, they do nothing for the weight in the front.

I'm new to WD hitches. It seems that the Reese hitch does not provide sway control. Am I correct?

Ball mount head angle set properly for correct weight distribution with the spring bar is a long proven weight distribution option but ...it’s not easily adjusted to differences in how the trailer may be loaded. The Anderson system is more then capable of distributing the weight forward back onto the steers of the tow vehicle,and rearward onto the trailer axles. Where the Anderson system excels is in it’s ability to provide load distribution that’s adjustable with the provided socket. Depending on how heavy or light the trailer has been loaded forward or aft,you can easily add or remove weight from the steers to give you the safest and most comfortable ride, without the bounce that (SPRING BARS) provide! Anderson’s other attribute is it’s superior sway control second to none!

Ok watching this is not the same as I brought got only the hard wire and it was already completed which means I need the wiring diagram

Ford ranger wouldn’t tow enough to worry about trailer brakes

what about backing up to position my camper trailer into campsite. i don't want trailer brakes to be on when doing this. my jeep is an auto shift so my brake pedal is use while doing this?

To all you ...newbies out there. You cannot just buy a brake controller for a Dodge Ram pick up. Even if you have the tow package. You must also buy the brake controller adapter harness wiring......... Just bought a Reese Towpower Brake Evnn compact brake controller and tried to install in tow package ram 2014. No luck. This controller comes with one 4 pin box like connector. Called number inside package and was told need to run red wire to brake area. There is no separate red wire. Looked it up and founds a site that offered customer service, You have to buy harness with separate red wire. So then ordered: a Reese Towpower® - 2 Plug Brake Control Adapter Harness, This thing comes with one end having a 4 pin connector and the other end has 2 grey boxed connectors. One of the 2 connectors is just for the red wire that goes to a terminal that is somewhere near the brake. This is for the brake signal light connector. The other gray box goes to a box hanging under your steerwheel dash. If you do not have a prewired tow package, you may also need to buy and install a long 7 pin/plug wire that goes all the way to the back of your vehicle. Please see other information sources about this for better information, mine was prewired and I am also a new to this towing life. more details on - www.carid.com/2014-dodge-ram-trailer-hitches/reese-towpower-2-plug-brake-control-adapter-harness-1583486417.html. This site offers software that allow customer to plug in make and model of your vehicle. Just found it. Why is this so hard? No one really seem to come out and say you need a wiring harness with a brake controller, even if you had a factory installed tow package when vehicle purchased. Anyway, I watched this video about 5 times. I cannot really understand the gentleman. He but does not show enough about the wiring. Please show me where the plugs are, what they look like, how many pins they have. What do I need as adapters? Maybe have someone repeat what he says in a different dialect of English. Not trying to complain. Just need really good instructions that are easy to understand to buy and use this product. Not very many good videos on this subject around the net. Thank you for what I did learn on this video. Would love to see one more specific. Maybe about the product I ordered.

1st - 35 psi? Pretty sure air bag systems can handle a great deal more than that. Try it 70 psi and then show us the result. 2nd - Distribution hitches don't help when there's 600 pounds sitting in the bed of the truck. 3rd - This isn't an either or situation, one can make use of both air springs/bags and weight distribution hitches. These can be used as complimentary systems.

A "weight distribution unit" is a must to not overload the tongue but I hope you are also using a trailer brake controller and not relying on the truck to stop the trailer.

How is this thing connected to the car's brakes? I have a 4 pin (factory installed) and so far not a single video can show / explain that.