MrSharp

Пікірлер

@parkinsontatak 19 күн бұрын

Okey stupid question here :) can I use it to file my nails? Will it do any damage to the sharpener?

@brucesmith9144 Ай бұрын

This is a great tool. I use that ceramic notch to keep the scissors sharp.

@brianlash154 3 ай бұрын

It's always better to strop more often than sharpen The steel lasts longer and you don't remove unnecessary metal over time

@rafaeltavares6928 3 ай бұрын

No need to use the notch imo.. Using just the stone and then cutting paper is sufficient

@nono559 4 ай бұрын

How much pressure do you put on the knife when sharpening?

@Netsolacetech 7 ай бұрын

Great video! Now let's do one on victorianox nail cutter and try clipping your nails and tell us how it feels.

@AKCrazyRussian 8 ай бұрын

Nice work 👍🏻

@beyza.808 8 ай бұрын

I had no idea how to use the ceramic part. Thanks for explaining so well😊

@alainsellier7751 10 ай бұрын

Great video! Thanks.

@darknyght3962 10 ай бұрын

You arent even getting full strokes in! Without running the entire blade on the stone there is no way youre getting that sharp!

@robertoservadei4766 10 ай бұрын

I bought it. Useless.

@Drunken-Startrooper 11 ай бұрын

Good Video. Gonna order this today 👍🏼

@djijomurdjevic Жыл бұрын

Can 3mm thick blade fit into the notch? Can you sharpen carbon steel blades with this sharpener?

@LORDVADER357 Жыл бұрын

So how much is the grit level of this sharpener? 400, 1000, 3000... 8000...?

@Slav_boi Жыл бұрын

Mr sharp i know i am commenting over a year when you posted this but you helped me to learn how to sharpen a knife on the victorinox sharpener,its cheap (15€) and yeah thank you

@mamyramaha Жыл бұрын

Hi, and about lifetime's stone sharpener ? thanks

@janoo85 Жыл бұрын

common why evrybody useing it in the opposite way? i make my knife sharp with the rod part and with the v shape ceramic part u just make it wors and more dull.......but the v shape part can reprofile ur blade and wit a few strike on the rod u can make it even sharper.

@holdenmcgroin3995 Жыл бұрын

Would this sharpener be OK for larger knives? Have a victorinox santoku and just got gifted this sharpener

@palmbeachcane9523 Жыл бұрын

Just bought 1 the other day and used it on a knife then dropped it & the stone broke in 3 pieces. Just got my second one and will not be dropping this one.

@Alsayid Жыл бұрын

Do you find it is a bit more difficult to sharpen the very tip?

@PJ_Grateful Жыл бұрын

Yes it's not ideal for EDC use, but it's the best and compact sharpener you have in your backpack

@ReiverBlue1971 Жыл бұрын

Good grief, I've owned once for about 3 years, never heard it call a "dual" sharpener so didn't know about the ceramic sharpener in the lid!! :) NOW I can get them sharp, thanks :)

@allffl3793 Жыл бұрын

Come si pulsce lafilatore.

@allffl3793 Жыл бұрын

Ma si usa a secco o con acqua? Fammelo sapere.

@sterkriger2572 Жыл бұрын

One thing that I do is to use the ceramic notch until the blade glides on it so I know for sure that is perfect

@101325 Жыл бұрын

How do you hold a consistent 20 degrees? This is the bit I can never do.

@PJ_Grateful Жыл бұрын

I only lock my wrist and i see how the edge falls on the sharpener

@beyazlamor5591 Жыл бұрын

Usually, these kind of sharpener stones are used with water. (By making it wet first, then applying the knife to the wet sharpener). Why don't we use this one with water? It is not common to sharpen knives dry.

@robhead22 Жыл бұрын

Beautiful job!! Thank you!

@Braun30 Жыл бұрын

During my service I used to simply sharpen my pocket knives against the very smooth and shiny blade of my bayonet every time I used it. It was razor sharp as long I did this.

@timsummers870 Жыл бұрын

Does it bring back factory sharpness?

@PJ_Grateful Жыл бұрын

Not really but it's still the best fieldsharpener 👍😊👊

@janosbalogh5686 Жыл бұрын

Actualy after i am sharpening with the stone part is always sharper than after i am pulling down with the ceramic blades. So the ceramic part just make it duller than the stone. So after the stone u are just ruining.

@ashab1 Жыл бұрын

Just lightly run it across once or twice to remove burrs I have seen the ceramic blades used to sharpen serrated blades I am not sure how effective it is though.

@trajtemberg 2 жыл бұрын

Great little thing, it's been in my pocket for more than 12 years. Don't bother with V notch, just strop a higher angle on the thinner sides. Also, not really suitable for super steels (takes way too long to get any results).

@PJ_Grateful 2 жыл бұрын

Yes Sir. I totally agree with you. It's a fieldsharpener. The best sharpener is the one you have with you👊🧑‍🎄👍

@moayad.alghamdi4156 2 жыл бұрын

I feel stupid saying this I’ve been trying to sharpen my Swiss champ and Swiss work and it just gets worse. It’s th 20 degree angle but still I just can seem to get it I don’t know why ?

@drengskap Жыл бұрын

Without seeing the condition that your blades are in and how you're using the sharpener, it's difficult to diagnose the problem, but I'm an experienced knife sharpener and I can confirm that this Victorinox tool is quite effective if used properly. However, all sharpening requires practice, and it took me a long time to get to a point where I felt fully skilled with several different methods, including oilstones, the Lansky fixed-angle system, diamond and ceramic rods, leather strops, honing steels etc. The best thing I can suggest is maybe finding someone local to you who is skilled at sharpening, and getting some advice or a demonstration from them - maybe a butcher or a woodworker? If that's not possible, then look at more videos, keep practicing, and maybe try a different system. This pen sharpener is fine, but it's really best for quick touch-up sharpening - for creating a whole new edge, you might do better with a Lansky kit or similar, then using the pen sharpener to maintain the edge. I hope this is helpful advice.

@redpillnibbler4423 Жыл бұрын

It could be you are sharpening at too steep an angle? - you might need to reprofile the edge.

@supermalic 2 жыл бұрын

Thank you for sharing.

@PJ_Grateful 2 жыл бұрын

Totally my pleasure 👊😊👍

@rhaebolhayon808 2 жыл бұрын

How much sir your sharpener victorinox?

@PJ_Grateful 2 жыл бұрын

About 15 dollar 👊😊👍

@jonathandominguez5568 2 жыл бұрын

You think it will work for any knife?

@PJ_Grateful 2 жыл бұрын

For smaller blades Yes👊😃👍

@claro371 2 жыл бұрын

Isn't honing the last step?

@e.v.i. 2 жыл бұрын

Can you make a video on how to sharpen a serrated victorinox knife like the skippet pro with this sharpener? I want to buy the skipper pro but don't know how i would sharpen it

@James-vg8bn 2 жыл бұрын

I tried a Wheatstone and it’s was ok but not great. Tried this and it works great!!

@mrbigberd 2 жыл бұрын

I wish it came with a way to stand it up (maybe a notch the fine sharpener could fit into) so it could do gravity fixed-angle sharpening like the sharpmaker.

@PJ_Grateful 2 жыл бұрын

Great idea 👍😃👊

@asamunandri 2 жыл бұрын

Wow, I had one before..and didn't know that the ceramic side can slip into the handle. Nice tips. Gonna get a new one..

@PJ_Grateful 2 жыл бұрын

Thanks 👍 it's a great fieldsharpener for sure. 👍😄👊

@danielwickwar5434 2 жыл бұрын

Thanks @MrSharp for an easy to follow guide, I've just been given an early valentines Swiss Army knife and it's been so relaxing just sharpening it up with the Victorinox. It's slicing through paper like butter now 😁👍

@PJ_Grateful 2 жыл бұрын

Thanks for your support Daniel👍😃👊 much appreciated 👍