Is it work good? I plan to install it to my fuel cell too
@PunsGarageАй бұрын
@hondateam248 yea but I found a better option
@BrokeVetGarageАй бұрын
Clean setup!
@kurser3228Ай бұрын
Do these wheel bearing fit on stock 2000 ek knuckles with 36mm hubs?
@willbewleyyАй бұрын
I’m really having trouble finding a replacement for the bottom line on the firewall… The “Factory line” Is no where to be found at any junkyard near me. If you know of a replacement part number/s for the whole assembly from the bottom line on the firewall to the drier with that little Swoop at the end I would appreciate it a Ton if you’d reply
@willbewleyyАй бұрын
I’ve found the line for the bottom on the firewall…. It’s just everything from the fitting by the headlight to the drier I cannot find
@PunsGarageАй бұрын
@@willbewleyy ebay u will.find it
@willbewleyyАй бұрын
@@PunsGarage i’ve been looking….. just not really sure on sizes or what’s got the correct bend since I have no original part to go off of
@@LeeChong-o4s 96-00 stock one for a civic like 40 bucks on Amazon
@darksilver2919Ай бұрын
How did u do the ac? Did u have I move radiator to driver side and the condenser to passenger side? Cause I’m doing my turbo k swap on my ek and I’m tryna still use my ac
@PunsGarageАй бұрын
@@darksilver2919 yes
@darksilver2919Ай бұрын
@@PunsGarage thank u so much. I just gotta drill the holes for the condenser bracket to the passenger side and then I’m all good to go? Do u use the stock ek lines or I gotta get new ones
@PunsGarageАй бұрын
@darksilver2919 you use some the stock lines and I got the hybrid racing ac kit
@darksilver2919Ай бұрын
@@PunsGarage I did the same
@kevinpenate89612 ай бұрын
Hey, did your ac compre and fan work as hard wire, mine pretty much function as it is hard wire running all the time, not idle correctly
@PunsGarage2 ай бұрын
No everything was working perfectly
@PunsGarage2 ай бұрын
Did u extend the fan wires like rad fan goes to the passenger side and condenser fan to the driver side
@kevinpenate89612 ай бұрын
@@PunsGarage fan and compressor clutch kits in but they are permanently running, idle ad while running if ac is on, the clutch kick in and the fan start running even if the car is off and the key is on the start position (car still off) .... I have a 96 tho
@vongdong102 ай бұрын
So the plug for the factory harness is no longer needed? Is that why you cut the wires instead of using the vampire clips? Edit: I was stressing because I couldn't find that plug but it turns out the factory green plug has all that in it and the harness is just plug and play now besides the fan/coolant wires and charge light wire.
@Born_Lowks3 ай бұрын
Dope
@gabegregory14403 ай бұрын
How much something like this cost?
@carportmods3 ай бұрын
This was the most clear and concise video that I've found. Thanks, bro! Subbed!
@AdventuresWithBugs3 ай бұрын
Think this work on a k swapped em2? If we use the 2000 civic ac stuff?
@herminiobravo33933 ай бұрын
Hey bro were you get the ac condenser and dryer from
@HasbullasBurner3 ай бұрын
Should’ve saved your money and leased a new car
@PunsGarage3 ай бұрын
🤣🤣🤣 y leased
@user-bu6xj7xi6x3 ай бұрын
Bro how does it idle
@PunsGarage3 ай бұрын
Perfect u can adjust it if needed
@user-bu6xj7xi6x3 ай бұрын
Mines works but my engine overheats when running I've head that unhave to go to the kpro and edit the vtp to bump the idle up but unsure
@user-bu6xj7xi6x3 ай бұрын
Dude I'm going crazy new condenser,dryer, still overheating I think I need to bump up the idle but I have kprov1
@PunsGarage3 ай бұрын
@@user-bu6xj7xi6x what fan u running and are u using water wetter
@Siricaned4 ай бұрын
what year is it
@PunsGarage4 ай бұрын
99 civic
@aidevil71224 ай бұрын
You need a pilot bit for that drill lmao
@CorleoneGF4 ай бұрын
I have wagon diff 4 84-87 & 3 diff 88-91 wagon diff.
@hondateam2484 ай бұрын
Wow you are rich now
@Tyler_Bass8505 ай бұрын
I took off in mine from my parents house, made a weird noise, now I have no first gear at all, won’t even go in that slot when the car is on or off, but it’ll go into every other gear, the shift box is old and played out, I’m hoping that’s what it is, just got the car and want to get it legal, but now there no point if something is really messed up internally
@M_arias5 ай бұрын
So did you turn the car on without an exhaust?
@frankrizzo25665 ай бұрын
Did the SI cable fix it?
@PunsGarage5 ай бұрын
Yes
@robertojuarez97855 ай бұрын
I want to do this to my LSD, basically all it needs is clearance foe the bolts to fit? Other than than done in the machine shop does it need any other modifications? Thanks in advance any info helps
@thiagoalves21575 ай бұрын
Lindo 😊
@elijahrivera99886 ай бұрын
K SERIES FOR THE WIN!!!
@PunsGarage6 ай бұрын
K is the way
@adamrayyan22636 ай бұрын
💪🔥🔥🔥👍
@PunsGarage6 ай бұрын
🙏🙏💪💪💪
@WolfPackPerformance6 ай бұрын
💪🏾🐺
@PunsGarage6 ай бұрын
My g 💪🙏
@andrespalombo18386 ай бұрын
Crv❤
@andrespalombo18386 ай бұрын
Niceeeee❤❤❤❤❤
@iAmTaiBoogie6 ай бұрын
@andrewjimenez10836 ай бұрын
where do you get all this stuff
@robertojuarez97856 ай бұрын
I got a 2000 EK k20 swap, just bought a k series AWD trany, currently saving for all parts to convert, one of my questions is do i have to change the subframe of my civic 2000 to fit the AWD conversion? Or regular subframe will work with AWD trany, not sure to if ill have to buy another trany mount bracket for the AWD.
@raines486 ай бұрын
What mounts are you using? My hasport ekk4 mounts doesn’t allow the ac to clear my innovative traction bar. Wondering if it’s the difference in height of k20 over k24. Or engine placement. Thanks in advance
@PunsGarage6 ай бұрын
Am using the ekk2 mounts with hub city rear mount i believe k24 is taller
@Advanced_Wallah6 ай бұрын
AWD in my i20
@its_rigzy71077 ай бұрын
Do you have to add anything in between that and the cabin or is it fine like that
@jr_nobody66497 ай бұрын
Absolute masterpiece ❤
@vasisl79377 ай бұрын
It's good to see you posting videos again.
@PunsGarage7 ай бұрын
Thank you man I appreciate that🙏💪 I got to catch u guys up on the hatch
@armandomejia80597 ай бұрын
What spindles are you using ?
@PunsGarage7 ай бұрын
Gsr with 36mm hubs
@PunsGarage7 ай бұрын
Karcepts
@Screamingz17 ай бұрын
What viscous is that?
@PunsGarage7 ай бұрын
Freelander
@seankaine24117 ай бұрын
I used to rock the Hub City AWD kit i sold that Hatch and then now im using FCS Racing's AWD kit.💯
@effingwrecked191718 күн бұрын
I think I might so S1 built. How the FCS?
@seankaine241118 күн бұрын
@@effingwrecked1917 I've had the Fcs for about a year now. I switched up mainly for weight reduction, the car was a streetcar now I take it out weekends or just to play. The S1 kit I know alot of people with it but my preference I don't like how it looks. The Hubcity kit is better and looks better in my opinion..
@robertojuarez97858 ай бұрын
I have a k20a2 on a ek with hasport axels, and currently saving money for this, if anyone can help me with these 2 questions: Current front axels fit the AWD trany? Do they sell a pipe for this or does it have to be open header? I looked a vid of a 4 door EK AWD and he had a pipe, i love the fact that car stays sleeper. Thanks in advance
@PunsGarage8 ай бұрын
Yes u can use the same axles and u might have to do a custom exhaust if u want it to work
@adorno10108 ай бұрын
how you get the kpro to turn the fan on, I have mine hard wired right now because the fan switch wire is not working
@PunsGarage8 ай бұрын
They might be a setting on kpro I can't remember
@DC2_Daily8 ай бұрын
Question if I wanted to awd swap my integra would I have to move the exhaust to the hood?
@PunsGarage8 ай бұрын
No u fit an exhaust
@fazriseal18718 ай бұрын
😊 😍
@SunTzu48 ай бұрын
Fat ass turbo nice ❤❤
@MacCready_8 ай бұрын
DAMB
@nonotsanchez91868 ай бұрын
Sir, what rear differential is that, from what car?
@PunsGarage8 ай бұрын
Wago
@nonotsanchez91868 ай бұрын
@@PunsGarage thanks sir
@isaacordonaz5879 ай бұрын
I need to find one for the teg🔥
@jxelll66409 ай бұрын
Yo whats the Difference between MIL and Check Engine Cable (BLUE/WHITE) ? I hooked up the MIL Cable, but my Engine light in the Cluster wont go on.