DIY Guy

Пікірлер

@patriciacontreras7816 Күн бұрын

Thank you ❤

@seanmclemore3205 4 күн бұрын

Hi, Great video just had a few questions. What bolts did you use to mount the bracket in the rivets. How do you determine what’s the best rivets to use for the mount or tv you’re trying to hang?

@themainthing3966 4 күн бұрын

Superb job and very straightforward video. thank you so much!

@dorn697 6 күн бұрын

Question DIY guy if you wanted to mount a 50" in that corner do you think you would have to move that mount up the channel further to accommodate the wider tv?

@steviezxr 7 күн бұрын

Can anyone link some puddle lights that work. The ones I have bought dont work ie canban errors

@jrgreen2742 11 күн бұрын

Your fix worked perfectly! Was going to buy a new thermocouple and your video saved me the $10. Detailed instructions done to the wrench size. Thanks so much.

@jamesthornton8236 15 күн бұрын

Thank you for posting this! My neighbor gifted me a used patio heater when they were moving. They admitted to me that it had not worked in a while but knew I was decently skilled at fixing things. I tried bypassing the tilt switch, and that did not get it. Came across your video and pulled the spring and cap off of the thermocouple and it now works flawlessly!

@nedmead6346 17 күн бұрын

Removing spring bypass it

@rosifotography1 Ай бұрын

Exactly all the things I needed to know!!! Just ordered rivet tool on Amazon, thanks!

@emailrobertbm Ай бұрын

Great vid! Literally just ordered your exact parts. Thanks for the inspiration

@craigw5121 Ай бұрын

Great install! Question. With that mount, would it be possible to pull the TV forward and up until the screen is essentially flush with the underside roof for added protection when not in use?

@YouNolesIt Ай бұрын

That was a very helpful video. Just one critique. It’s a gazebo not a pergola. Pergolas have intermittent openings in the roof and gazebos have an entirely closed in roof. I only mention it because it was a little misleading when searching TV installation videos for gazebos

@bpb5541 2 ай бұрын

Thanks for this

@Neighborly_Content Ай бұрын

My pleasure!

@watchme2hard5 2 ай бұрын

Awsome job this is just what im looking for. Thanks for the breakdown very professional.

@Neighborly_Content Ай бұрын

Glad it was helpful!

@dennisdeluca4350 2 ай бұрын

Thank you, sir. Thermocoupler was the issue. Salute!

@TimWillinghamRatz 2 ай бұрын

This was a great idea and set of instructions. Not quite everything is self-explanatory, but anyone can figure it out. I bought a different rivet tool since the one you posted is no longer available and was disappointed with the sparse instructions and lack of a storage box for it, but was able to get the job done.

@rafitaino3137 2 ай бұрын

Please next time u do a video do better explaining like what size drill bit u use, size of the revit

@Neighborly_Content Ай бұрын

Ok will do

@rafitaino3137 2 ай бұрын

So what size hole did u drill???

@Neighborly_Content Ай бұрын

Depends on the river but I’ll be sure to update next time I make another vid.

@curtismahaley 2 ай бұрын

You are a tool snob… he😂!

@pittssteelers6 2 ай бұрын

Isn’t that a water channel to catch the rain and run it down to the corner where u drilled that hole?

@Neighborly_Content Ай бұрын

No, water runs above in a channel between the panels for the roof. No water entry inside the frame.

@jvideosearch111 2 ай бұрын

Can you come do mine?😊

@Neighborly_Content Ай бұрын

I wish I had time to finish my other projects first. 😂🤣

@rosifotography1 Ай бұрын

Same 🙋‍♀haha

@vette4118 2 ай бұрын

NOW MY DOME & MAP LIGHTS DONT WORK--- THE REAR SEAT ONES DO - THE FRONT IS TOTALLY INOP.... DID I RUIN THE UNIT SOMEHOW'?... 2010 XC60 T6

@Neighborly_Content Ай бұрын

You may have blown a fuse, happens occasionally, I would check the panel under the passenger seat. Use your manual for a guide and look for int lights or courtesy lights. Should be like a 7.5 or 10 amp.

@Mr40warhawk 3 ай бұрын

Unfortunately he skipped right over how tight engine mounting bolts should be...which is why I watched this

@Neighborly_Content Ай бұрын

Just don’t make them go righty loosey 😂 but here is a good guide to find that out as I don’t quite remember mine. www.briggsandstratton.com/content/dam/briggsandstratton/na/en_us/Files/FAQs/engine_mounting_hardware.pdf

@Mr40warhawk Ай бұрын

@@Neighborly_Content thank u sir. This is some very useful information

@gussyman007 3 ай бұрын

I was all set to install the mount you used on my Purple Leaf gazebo and realized that the triangle roof pieces have a lip that is going into the channel I was putting rivets in. Does your gazebo not have the roof pieces sitting in that channel you mounted too? I stopped my project shy of drilling.

@Neighborly_Content Ай бұрын

My BJs brand does not have this. The panels sit on top of the frame but it does not act as a channel. The holes do not go through the top either so no worries on mine.

@zardoz1138 3 ай бұрын

I wanted to hang my 43” tv in my metal roofed gazebo and came across your video. I was trying to figure out the best way to do it. Had no idea about the threaded rivet tool. Bought it at Harbor Freight and within 30 minutes had the tv hung. Thank you for this video.

@Emajination 2 ай бұрын

Do you have a video as well?

@julioortiz7160 2 ай бұрын

Is that comes with the bolts ?

@rosifotography1 Ай бұрын

Same here! I ordered a rivet tool the moment he said it. Can't wait to mount my tv!

@michaelclark741 4 ай бұрын

Perfect, thanks fella 👍🏻

@jmcnite1 4 ай бұрын

Just finished this same setup. Thank you for all the info.

@Emajination 2 ай бұрын

Do you have a video as well?

@jmcnite1 4 ай бұрын

What size drill bit did you use? I’m planning on doing this same setup this weekend. Ty

@westwizard89 4 ай бұрын

Same looking to see what size drill bit was used and what size rivet nut what was used.

@user-hh9vx6vq9n 4 ай бұрын

never did show the most important part as how to adjust the cable???????????

@zaneblane8160 4 ай бұрын

Care to update? Would you change anything?

@humbertoflorentino8221 4 ай бұрын

Do you happen to have the link for the screen you used? I have the same gazebo.

@rtcharghita 4 ай бұрын

You talked a lot and worked a little :-(

@markdull63 4 ай бұрын

Another heater saved from a landfill! The company I work for threw one of these 3 foot tall heaters in the dumpster. I dusted it of and pulled it apart but couldn't get it lit. I modified the regulator like you explain and now it works great. I don't even need a space heater i just like to fix stuff and keep things out of the trash. Gonna pass this off to a friend.

@delorsebarnes6328 5 ай бұрын

Thanks for sharing. Can you please tell me what size screws did you use and what size Rivet nut did you use for the holes and what size drill bit? Did you use? Thank you.

@outdoortvmount 5 ай бұрын

ZeboZAP tv mounts straps without drilling upto 85inch tv.

@jefflovinfishin621 4 ай бұрын

Can’t use those when you have curtains on the gazebo. The curtains wrap across the posts so the mount would be behind the curtains.

@julioortiz7160 2 ай бұрын

Yes that’s my problem too the curtains !

@kerisatterwhite9618 5 ай бұрын

My heater is whistling or hissing. What is wrong and what should look for to fix?

@rdspurlin 5 ай бұрын

Followed your instructions exactly, and the install was perfect. Thanks for posting this very detailed video.

@Route32rg 5 ай бұрын

Best video ever! Saved for when I do mine!

@paulgale523 5 ай бұрын

Worked a treat my patio heater had cut out random for the last few years. And they wouldn’t say on at all anymore and now it’s running fine 👍🏻

@johnpaul-mp7zc 5 ай бұрын

Great video thanks We have a metal pergola/ gazebo too but the bar in the roof is only about 1/2 inch thick and it's right up on the exterior roof. Do you think the NEU MASTER Rivet Nut Tool, will support a 65 inch TV? thanks, any suggestion? john

@Neighborly_Content 5 ай бұрын

Depends on the weight and bolt used to hold it. I may upgrade to a 40 or 46” but 65 may be pushing it.

@650mailman 4 ай бұрын

What size screws are those going in the b a close of the tv I have the same mount but no screws everything that came with the mount are to big

@rafitaino3137 2 ай бұрын

@@Neighborly_Contentso what size drill bit, what size hole n what is the revit size???

@JessicaCallaghan-rr8xl 5 ай бұрын

I am not mechanical in the least and decided to give this a go.....so glad I did. Your simple explanations and specific step by step advice were perfect. Can't thank you enough (and thank you for specifying the 13mm ! I now have two working patio heaters again!

@gregoriolinares1299 5 ай бұрын

Hola alguien que me ayude tengo problemas con una estufa de patio cambie el casquillo y puente los sensores y nada q enciende que otro problema puede haber

@veinspect 6 ай бұрын

Does anyone know if this problem been addressed by Echo?

@Neighborly_Content 5 ай бұрын

People have 3D printed larger sweeps that seems to do better. I’m actually looking to ditch mine as the wheels seem impossible to turn when loaded. I’ve greased and addressed the gears to no luck.