Hi did you post a video showing how to fix and then got taken down?
@vasiliyo2 ай бұрын
Best Video!
@claudiobelli98422 ай бұрын
thanks
@userskorea3 ай бұрын
great video
@claudiobelli98423 ай бұрын
Thanks friend
@kilovolt24943 ай бұрын
Still recognizable and notorious Chinese quality. Especially these broken pieces in the beginning. No, thanks a lot, I will pay more for something better
@DSCKottawa4 ай бұрын
Ottimo tutorial. È difficile trovare batterie al litio sostitutive per questo cacciavite? Sembrano più piccoli del 18650.
@pandar114 ай бұрын
got this exact one and its the same deal, its gone from the clicking to literally not spinning the bit at all now. Been looking for a teardown video to have a look inside and came across your video :D
@claudiobelli98424 ай бұрын
HI maybe you've already seen it, but here ( kzbin.info/www/bejne/mWbJh4SkjbB7rtE ) I show how to disassemble it. I hope it's useful to you ;)
@emilandresen90096 ай бұрын
Had mine lying around in my tool box for a long time, though not because the screw driver itself actually worked. I just kept it because of the tool bits and aesthetics i guess. Anyway i today decided to clean up a bit inside my toolbox, also meaning repairing broken tools. When i opened the screwdriver seen in this video, i firstly realized that the battery was completely dead, though that is caused most likely from the fact that the screwdriver had lied in the tool box for years, with a completely dead battery. That being said, a dead battery is most likely not what has caused your issue. I might be a bit ignorant on the topic, but if you want to fix this specific type of screwdriver, with the problem seen in the video (weird sound or and stuck when turned), then good luck my friend, because your gonna need it. The small dc motor is attached to a series of gear reduction spur gears, and as i looked onto the gears i could see with my bare eyes that the upper most gears where completely fuc*ed🤣. So there you go, if you want to fix this issue, go get some new spur gears🤣. Good luck mate😉
@claudiobelli98425 ай бұрын
Thanks friend As mentioned in various comments, back when the video was made, I purchased and replaced the gear assembly for just a few euros. It was easy-peasy! 😉
@emilandresen90095 ай бұрын
@@claudiobelli9842 That's awesome, how does the screwdriver hold up now? Is it the same gear that seemingly easily breaks or did you buy some upgraded version?
@mrnarason6 ай бұрын
I barely even used this and the battery stopped charging...
@bcur53764 ай бұрын
You can see in the video it's a 3.7V 350mAh Li-ion ICR 10440 cell. Tried to post a link, but if you search ICR10440 you should find it!
@mcm10006 ай бұрын
Could you tell me where to buy the engine?
@claudiobelli98426 ай бұрын
Hi, if you look the earlier messages, you'll find the link where I bought the spare parts. Just keep in mind that they date back some time ago..
@soulr34v3r7 ай бұрын
El motor es como de los juguetes
@saikulhadi64267 ай бұрын
What type of battery does it use?
@claudiobelli98427 ай бұрын
a normal 3.7v battery
@bcur53764 ай бұрын
You can see in the video it's a 3.7V 350mAh Li-ion ICR 10440 cell. Tried to post a link, but if you search ICR10440 you should find it!
@bcur53764 ай бұрын
You can see in the video it's a 3.7V 350mAh Li-ion ICR 10440 cell. Tried to post a link, but if you search ICR10440 you should find it!
@Dobriy_Chelovek11 ай бұрын
Хватило ровно на один разбор ноутбука. Стерлись шлеци редуктора. Никому не советую данную отвертку, предыдущая модель в разы лучше.
@spiaggi11 ай бұрын
I have the Xiaomi branded one at work and the Mijia at home, both brand new, same finish but different sound 😅😮
@RaccoonTech Жыл бұрын
I have the same problem (Please tell me if you managed to fix it? Did you replace the entire gear motor? If so, please tell me the model so I can also find it and get a tool to repair my screwdriver... Thanks
@claudiobelli9842 Жыл бұрын
Yes of course, I replaced the gears keeping the original engine because it was of superior quality. Read in the comments, I also indicated the links. check if they are still valid.. have fun
@RaccoonTech Жыл бұрын
@@claudiobelli9842 I couldn't find the links in your comments or in the description below this video( Can you please tell me where you ordered the gears for this motor reducer? Did you order them from aliexpress? if so, tell me what they are called by name so that I can also order for myself))
@RaccoonTech Жыл бұрын
@@claudiobelli9842 Model N20 200 RPM 3v?
@claudiobelli9842 Жыл бұрын
@@RaccoonTech In the comments it says.. Anyway I got it here. I took the 150rpm version but it's a little fast, so I recommend the 3v and 100rpm version. Furthermore, I also advise you to replace only the gears and keep the original engine because it is of superior quality. So actually when you buy the voltage it doesn't matter. Remember that you will also need to shorten the tree to the right size. it.aliexpress.com/item/4000309894567.html?spm=a2g0o.order_list.0.0.378d3696OSIcma&gatewayAdapt=glo2ita%29
@RaccoonTech Жыл бұрын
@@claudiobelli9842 This link you left in the comments is a slightly different gear motor, it has a longer tip. But I found the same one with the same dimensions that should fit perfectly. And yes, I will replace only the gears, and I will leave the motor original.
@Glow113 Жыл бұрын
Bro my motherboard was broken where do i get it
@deliveredlate Жыл бұрын
Hello should i replace the motor with a 100, 150 or 200rpm motor
@zlibz4582 Жыл бұрын
i didnt charge it for a year and now it wont even charge , the red light comes for a second when i plug in the usb cable but then goes away , is there a problem with the battery or with the usb pin ? if we want to change the battery can you please post a video on how to do it ? or to change the usb pin
@bcur53764 ай бұрын
same issue
@bcur53764 ай бұрын
You can see in the video it's a 3.7V 350mAh Li-ion ICR 10440 cell. Tried to post a link, but if you search ICR10440 you should find it!
@danny21477 Жыл бұрын
only with his fingers? the demons under the bed are scared of this dude for sure
@claudiobelli9842 Жыл бұрын
😄😄 You're funny. Don't worry, demons don't fear me and I don't fear them. I have no interest in deceiving people. When I decided to make the video, I had already disassembled it, so it was easy to open it with only my fingers. It seems quite obvious to me! As I have already said in the description, the video is purely demonstrative, it only serves to help ..
@iTripleE Жыл бұрын
Mine already locked up. Only used couple of times.
@claudiobelli9842 Жыл бұрын
I am sorry. Try to watch this kzbin.info/www/bejne/mWbJp6SkrdCbrtE
@SamueleMotta Жыл бұрын
Nel mandrino che fai vedere nel minuto 2:31, ci sono 2 o 3 rullini all'interno? Mi è caduto e ho paura di averne perso uno.
@seyhmuzerden7579 Жыл бұрын
where can i find this broken mechanism? i checked outside mechanism but i couldnt see anything number or code
@claudiobelli9842 Жыл бұрын
Topic already covered. Read the answers to "Riccardo Fedeli"..
@LordAnubis0909 Жыл бұрын
just got the same problem. gearbox has some broken pins. i must say it came as a shock to me. i made 4 el. drivers with same motor and never had problems like this. got this one as a gift and gave it a go. brok down in less then 2 charges of battery. luckely you can get this motors on Aliexpres for 2-3€ (and i had some in stock :D)
@aresoumane618 Жыл бұрын
MERCI
@claudiobelli9842 Жыл бұрын
Prego!
@mfadzlijamaluddin Жыл бұрын
I wrapped with cloth insulation tape, pulled it with a plier. Phewwwh what a pita to remove the cap. The built quality is impressive tho.
@painrelieverstech Жыл бұрын
Is it well constructed? What do you think about its motor and durability? I'm not a eletronic guy
@claudiobelli9842 Жыл бұрын
Yes, it is a well built product. The materials are also good considering the price. You just have to be careful not to use it with too much force, otherwise you risk breaking the gears as happened to me while I was unscrewing the screws of a notebook .. For this reason I think it is only suitable for smartphones or something similar.
@mateulit888 Жыл бұрын
where I can find battery for this xiaomi screwdriver?
@bcur53764 ай бұрын
I had the same problem. You can see in the video it's a 3.7V 350mAh Li-ion ICR 10440 cell. Tried to post a link, but if you search ICR10440 you should find it!
@goesnatural Жыл бұрын
listen to the boss,,,,, don't forget to stop by for black coffee together... goes duit so that you will increase your enthusiasm for work and add brothers thank you very much
@claudiobelli9842 Жыл бұрын
Thanks!
@bethepro Жыл бұрын
😊❤
@claudiobelli9842 Жыл бұрын
Thanks!
@niandilo Жыл бұрын
what is the correct way to remove it? My screwdriver is too hard to remove
@riccardofedeli4711 Жыл бұрын
Ciao scusa il disturbo sai per caso di preciso che motore è ? Quanti volt, amps e rpm ha per orientarmi sull'acquisto su aliexpress ?
@claudiobelli9842 Жыл бұрын
Ciao Premesso che non ho ancora acquistato il motoriduttore di ricambio per il mio, il motore è da 3V e, misurato, il mio ruota a 168 RPM. Quindi acquisterei quello che più si avvicina ovvero il 200 RPM.
@claudiobelli9842 Жыл бұрын
Mi correggo, ho visto che ci sono anche quelli da 150 RPM..
@riccardofedeli4711 Жыл бұрын
@@claudiobelli9842 come hai misurato gli rpm ?
@claudiobelli9842 Жыл бұрын
@@riccardofedeli4711 Con un tachimetro digitale, ma esistono anche altri modi efficaci anche se meno pratici. Io, ad esempio, ho utilizzato per molto tempo le registrazioni audio digitali importate in programmi con una timeline tipo Premiere.
@riccardofedeli4711 Жыл бұрын
@@claudiobelli9842 te lo chiedo perche cercando su aliexpress non c'è nessun motore da 3v con 150rpm circa che abbia le prestazioni dichiarate da xiami nel mijia screwdriver
@user-nq5xr7qg9y Жыл бұрын
how do you open the cap? it's so fit that can't open by using my hands.
@MrPartysun Жыл бұрын
@Espace Figuratif It's a challenge, I am not a good master, but anyway how :) Are there any lockers inside which I need to push firstly?
@MrPartysun Жыл бұрын
Ok. I've done it. The redactor is broken.
@ivanalekseevich7246 Жыл бұрын
@@MrPartysun Я так понял, ты уже пытался разобрать такую. Это возможно сделать не ломая крепеж на крышке? Или там никак? И если никак, что потом с ней происходит? Не слетает сама по себе?
@flibustieros Жыл бұрын
@@MrPartysun так как открыли то?
@flibustieros Жыл бұрын
Короче, я намотал 10 слоев изоленты и вынул плоскогубцами без поломок
@ventaslogiteccargologistic26442 жыл бұрын
I broket the motor of my screwdriver, you know where I can find it?
@ventaslogiteccargologistic26442 жыл бұрын
BTW: thanks for the video
@claudiobelli98422 жыл бұрын
Search the Aliexpress site for "n20 dc geared motor". And be careful to choose the one that's right for you.
@MrPartysun Жыл бұрын
Did you find a right motor?
@claudiobelli9842 Жыл бұрын
@@MrPartysun Look in the answers to "riccardo fedeli". 😉
@b-side.2 жыл бұрын
My product also has these symptoms. The durability is worse than that of the wowstic 1f product.
@claudiobelli98422 жыл бұрын
In fact it is much more fragile than I expected.
@DavidLopez-op4zb Жыл бұрын
@@claudiobelli9842 Same here
@andreab19712 жыл бұрын
Ciao scusa Ho visto che hai messo due video riguardanti il cacciavitix Xiaomi che ha problemi se per caso è riuscito a trovare un modo per aprirlo?
@claudiobelli98422 жыл бұрын
Ciao I due video riguardanti il cacciavite XIAOMI Mijia, li ho pubblicati solo per dimostrare al sito dal quale l'ho acquistato, il difetto che si presentava già dopo il primo utilizzo, ovvero qualche ingranaggio interno rotto. Grazie a questi me ne hanno inviato un altro. In effetti avevo una mezza idea di smontare quello difettoso ma non sembra cosa facile a meno di non danneggiarlo. Anzi pare costruito proprio per non essere aperto. Comunque, visto che tanto è inutilizzabile, appena avrò un po' di tempo ci proverò e nel caso ti faccio sapere.
@andreab19712 жыл бұрын
@@claudiobelli9842 Ottimo grazie!
@claudiobelli98422 жыл бұрын
@@andreab1971 Ciao Se ti può ancora interessare ho fatto un video che illustra lo smontaggio dello XIAOMI Mijia. lo trovi qui: kzbin.info/www/bejne/mWbJh4SkjbB7rtE