Can it also import PDF files? How to access the camera of the laser for correct positioning of the shape?
@LaserGuy6224 күн бұрын
I just watched a bunch of tutorials and found this one very interesting because I do a lot of Yeti Tumblers with company logos and this would help greatly. I was wondering if it is available as a free or purchase only Macro. I have looked for it but can't find anything about it. Even Doug Green couldn't help me out locating it. Thank you for sharing your knowledge with us all.
@jeannestucker11825 күн бұрын
love it! I just learned a fun new tool!
@ynh19892 ай бұрын
So this is how I save a job to actual machine? I hate how all my jobs disappear once I turn the machine off and I have to re-enter them in.
@FrankHull-jv4pt2 ай бұрын
Anyone got this working yet? I've updated my firmware to 1.1.0.2 but no matter what browser I use I get a "server stopped responding" message when I enter my laser's IP on my iPad Pro
@EngravingConcepts2 ай бұрын
Thank you for reaching out. I would start by checking to be sure the laser has a solid internet connection; be sure you can PING the laser and get a reply to/from the IP Address listed on the laser. I tested this out from my iPad yesterday without issue. - [email protected] - If you continue to have issues, I would create a tech support ticket by clicking the SUBMIT A TICKET at the following link: www.epiloglaser.com/support/
@rajeshbajaj79002 ай бұрын
Have a question related to mail merge from Excel to Corel . Whenever I merge phone numbers with 10 digits it works fine but in case there are 2 ph. numbers separated with comma for eg. 99999999999, 99999999999 in corel merge file this entry remains blank with no data in that particular field. Please suggest.
@jeanfree32973 ай бұрын
Thanks, just exactly what I needed to know.
@bujjibabu8423 ай бұрын
Wonderful Tip ❤ thank Q
@peepshowbaybay3 ай бұрын
That was a very good very informative hands on video!!! Definitely appreciate it!!!😊
@digitaldiorama4 ай бұрын
😂
@digitaldiorama4 ай бұрын
How often should you do this - with a good ventilation system in place?
@digitaldiorama4 ай бұрын
Just got my 40w Fusion Maker. Hope I never let it get into that state 😮
@JeanetteGustafsson-pn9dd4 ай бұрын
Can you help me? I have an Epilogue. When I send the file from Illustrator and press settings to get to Epilog's program to set cut settings, I don't see the whole window. Got a new computer with Window 11. Guess it's a setting but I can't find the right one.
@bleearg01024 ай бұрын
It has two camera but only uses one for each lens so you need to manually determine how offset your mark will be vs what the software is showing no matter how well calibrated your Galvo focus is.😂
@rlayoutube4 ай бұрын
It is true - the mark will be in a different location than shown in camera view, IF the galvo platform is either raised or lowered through OFFSET. The laser beam is coming from a fixed location, changing the focal plane will result in the laser going to a different location on the workpiece. The camera feature is awesome, and the offset feature is great as well, they just don’t work well together. Many of the G100 apps will be single plane marking and for those multi plane apps, we will need to set up the artwork relative to the areas to be marked. Thanks for commenting. Have a great day!
@bleearg01022 ай бұрын
@@rlayoutubeThank you for the comment. To better clarify, the issue I have is using the camera assist to place graphics accurately. For instance, accurately placing a circular mark on a circular object just using the camera assist is not possible for me at least. The camera angle is extreme enough that I cannot get it accurately lined up. If material is small, like 50mm in diameter and the placement is off by 1-2mm it is very noticable. I was hoping not to have to set up a new jig for every job that requires. mm level accuracy. I am open to recommendations. My second issue is doing relief and contour engraving, 2.5D etc. Unlike my Fusion pro, there is no 3D setting and I cannot find any documentation on how to get this machine to engrave 3d grayscale. Cheers!
@MrBradforbes5 ай бұрын
This was super helpful! Thank you!!
@user-im5tw4qk5i5 ай бұрын
Hello sir, would you send me the template please?
@GoJoeGo586 ай бұрын
What affects do you experience if you don't clean that rail? Are you cleaning it with alcohol?
@tippyzuk16 ай бұрын
Great video, just the instructions, no filler!
@151drum6 ай бұрын
When I get to the step where you go to open EpilogWinALL after clicking Have Disk, my computer doesn't seem to be able to actually open it. Do you know why this might be and what i can do to fix this?
@s.v.14896 ай бұрын
Do you have any Solution?😊
@majesticoffsetprinters24357 ай бұрын
is this applicable for coreldraw 12 version ,sir? i had tried but its overwriting the excel file names
@digitaldiorama7 ай бұрын
How often do you recommend cleaning the lens?
@EngravingConcepts4 ай бұрын
Generically speaking you want to check your lens & mirrors every week or two. Specifically it depends on what materials you are cutting, how much residue is being put into the laser system, how well maintained your exhaust and/or fume extraction is performing. And alwasy be sure your air assist is ON; especially during cutting; there's some debate about it being required during engraving, but again that depends on the material & exhaust performance.
@haribaskaran8917 ай бұрын
How to auto condese text while merging the data from Excel into Corel draw
@majesticoffsetprinters24357 ай бұрын
thanks for your Excellent Videos, You are really Genius.,
@Robonza7 ай бұрын
awesome video mate
@EngravingConcepts7 ай бұрын
The "sister" video mentioned (similar to this video but created in Adobe Illustrator) is kzbin.info/www/bejne/e5bFf2x4abesncU
@OakHillMillworks8 ай бұрын
Huge frustration not being able to send jobs with my new laptop this weekend. So thankful I stumbled upon your video. From a fellow KZbin video maker…. Thank you for taking the time to make this! - Christy
@EngravingConcepts8 ай бұрын
Thank you for watching and we appreciate any feedback. Thank you for being an Epilog Laser Customer! Made in the USA! Welcome to the family and please share with your laser friends. ;)
@stephen_LaserLuster8 ай бұрын
Thanks for a very clear description. I didn't catch where we configure the computer's IP address. The Zing manual mentions it but the steps are not very clear. (I just wish the USB installation worked as easy as it does on all my diode lasers :)
@EngravingConcepts8 ай бұрын
Hi Stephen, Thank you for watching & any feedback! You'll Fast Forward to 1:19 on this video to troubleshoot/setup the IP Address on the Computer. That's Control Panel | Network & Sharing Center | Ethernet "Local Area Connection / Change Adapters. IPV4 in the PROPERTIES dialog and that will show the IP ADDRESS for the PC"s network part, being used.
@EngravingConcepts8 ай бұрын
kzbin.info/www/bejne/jpCvnotoiLV2gas
@DustinN8288 ай бұрын
That’s sweet, wish I had one
@rlayoutube8 ай бұрын
Unfortunately, the only export version is a .dbi file. Thank you for checking.
@vidserver58 ай бұрын
Thanks so much for sharing this... super helpful. Curious, (and wo/going out to the shop and checking) can material/job settings be exported out as a CSV file? Be great extension to my particular workflow on my FUSION Edge 24". FWIW: More excellent vids about Job Mgr. are always welcomed :)
@TheAvocadoMan8 ай бұрын
What about the 4th mirror????
@EngravingConcepts8 ай бұрын
The 4th mirror on the Mini 18 & 24 & Helix is fixed. No adjustment screws for the 4th mirror.
@brucehardy89138 ай бұрын
Thanks Randy!!!
@daneseckar-anderson20849 ай бұрын
Do you guys do any consulting on a Fusion Pro? Just got one at our office and I am trying to dial in the proper configurations for YETI tumblers. Love the vids!
@EngravingConcepts8 ай бұрын
Yes we do
@user-yi6xd1rm7p9 ай бұрын
Hello, This video very helpful. Can you tell me, how to find the spare parts. I need lenses, Laser tube etc.
@EngravingConcepts8 ай бұрын
Looking for help with your laser system? There are many easy ways to contact our Technical Support Team: Search for the answer in our Knowledge Base Submit a service ticket that can be tracked online Call +1 (303) 215-9171 Email Technical Support: [email protected] Email Parts Requests: [email protected] Screen Share Support: Click here if a technician has provided you with a Session Code
@jeanettebrewer57379 ай бұрын
Where's Jimmy's tie??? :)
@EngravingConcepts9 ай бұрын
He removed the tie for OSHA safety reasons, while he was performing other duties in the warehouse 😅 - Randy
@mafakefoot9 ай бұрын
nicely done teaching video
@mafakefoot9 ай бұрын
like video
@user-dk4lg8nm6u9 ай бұрын
Hi! do you have the size of the spring? i only need to change that...
Exactly what I was looking for. I had done this years ago, but if you don't use it all of the time, you forget. You made it perfectly clear. Thank you!
@EngravingConcepts8 ай бұрын
Glad I could help!
@prithingaradevisridharan949511 ай бұрын
Thank you so much for your helpful videos.
@EngravingConcepts8 ай бұрын
Glad you like them!
@vortexlooks11 ай бұрын
This is a great video, thanks for posting it. I always struggle to figure out the flat side of the mirror, is there a trick to this?
@EngravingConcepts8 ай бұрын
Not that I know of; just be sure shiny side of the mirror faces the laser beam. ;)
@vortexlooks8 ай бұрын
Sorry, I meant the flat side of the lens. @@EngravingConcepts 😆
@EngravingConcepts8 ай бұрын
When installing the lens it's always FLATSIDE DOWN towards the flat table. Bubble SIDE UP. @@vortexlooks
@yflow5337 Жыл бұрын
Thanks! Is there solution to add buttons with macro commands programmatically?
@EngravingConcepts8 ай бұрын
kzbin.info/www/bejne/fnTIq6Fqnd-kjKM
@bobheltibridle6023 Жыл бұрын
over the 12 years that I have had my Helix 24 I have replaced the ribbon cable twice, This time I before reinstalling it I put electrical tape on the top and bottom of the section the travels with the laser head assembly. Both times I replaced the ribbon cable it was worn through from rubbing on the inside of the cover hood.
@jimavery554 Жыл бұрын
Thanks for the video, appreciate it
@EngravingConcepts Жыл бұрын
Any time!
@Flightrisk2 Жыл бұрын
Excellent! This might be exactly what I need. I have a shelf of Yeti's and thise things are pricey
@EngravingConcepts Жыл бұрын
Glad it was helpful!
@jojo-yo1sk Жыл бұрын
Sir, what if when you fire the laser, but the burnt mark is not in the centre...
@EngravingConcepts8 ай бұрын
Make the adjustments to the correct mirror screws to bring into the target area.
@JoseyWales187 Жыл бұрын
Thank you for sharing this ! 🙏
@MrRfitz27 Жыл бұрын
I know this is along shot but would you happen know if the lens is an 18 or 20mm or somewhere size. We have a (probably) slightly older model its a 70 or 75 watt epilog that looks really similar to the m2. And our 2inch lens has been cracked for sometime and I really would like to replace it. Thank you
@EngravingConcepts Жыл бұрын
Have you tried contacting Epilog directly? There's a lot of parts that we ourselves don't keep in inventory at Engraving Concepts.
@EngravingConcepts Жыл бұрын
No Complicated Programming Involved Two Lenses, Two Cameras, Two Field Choices Automated Door for Quick Changing of Parts Accurate Camera Positioning of Your Artwork