I’m sorry I’m late but I have a 2001 gt and it has over 200,000 miles and my tranny starting to slip. I wanted to know your recommendations on since it’s so old should I flush all the fluid out. I’ve heard this can cause other issues so I’m resolving to putting additives in it for the time being.
@dennyp30549 күн бұрын
No bullshit straight forward🤘🏽
@hangtenboy9 күн бұрын
Short, sweet and to the effing point, man!
@jdykes13813 ай бұрын
As I thought this video was terrible due to the lack of verbal instructions. But, nevermind, because clearly many were helped by it. Thanks for sharing.
@MegaJkw1233 ай бұрын
Spot on, apart from you never torqued the carrier or slider bolts or mentioned what the torques are.
@bigfootswatching99863 ай бұрын
I looked at so many YT video's and what looks simple can take all day if not worse!!! The problem issues with these older cars.....the bolts may strip or not come out and that lies the biggest issues!
@alanruiz69917 ай бұрын
Hey brother question, you think its doable to compress the pistons with just a clamp and one of the brake pads? or I gotta do you did to get them "evenly"
@justinjackson39967 ай бұрын
promo sm
@kevstamc36767 ай бұрын
I wanted to see the part if he removed the actual spring..that's what I need to find and can't find anywhere 🤨
@Khoanigsegg8 ай бұрын
Nice lap!
@franklinpatricioaucayguama18968 ай бұрын
Precio de ese trabajo
@EdGlez1008 ай бұрын
What size of wrench 🔧 you used to pull the belt tensioner Nice video my friend keep making more
@mariomwinans588810 ай бұрын
Is this a 2019? If so, did you have to use a computer to release the brakes or something?
@alexvieira794510 ай бұрын
Say somthing damn it no bolts size nothing lol
@edhernz158310 ай бұрын
All silent 😮
@user-sn2th9gm4c10 ай бұрын
Did u have to bleed them
@user-sn2th9gm4c10 ай бұрын
How do u add
@user-vt4mx6zd2j10 ай бұрын
Thank you for sharing ❤
@drenemsavy4188 Жыл бұрын
Where did you order the oil filter?
@bigfootswatching99863 ай бұрын
Oem parts /// Toyota Dealers or even Amazon has the oem's for good deals.
@dhz1990 Жыл бұрын
Not one single answer on what size tools to use...
@magicwaffl3z Жыл бұрын
You did a speedrun on those, great vid!
@sarahpeart8926 Жыл бұрын
Is there a washer on the filler plug? Thanks
@ILoveChanelLynn Жыл бұрын
Thank you! You are Awesome!!!
@kevinmartin168 Жыл бұрын
Thanks for the helpful video. You were easy to follow. You are appreciated 😎👊
@richard1835 Жыл бұрын
Thank you. Got a #3 injector that is bad on an xc90 3.2L tomorrow. Take Care
@joetaft3429 Жыл бұрын
What Size Socket Did You Use ? Thanks
@johnhurlbut9728 Жыл бұрын
Excellent video mate. I have a question, should I always change the rotors every time when I replace the pads? All the best mate from John in the UK
@inneshutton3716 Жыл бұрын
This guy knows his stuff and does the job correctly without skipping bits.
@TheDradge Жыл бұрын
The best of all the Jaguar XF rear brake videos. All in detail and a steady, clear vision of all the components. Great work!
@jessemartinez6781 Жыл бұрын
You made it look so simple and effortless. Time to tear mine apart in the Walmart / Advance auto parking lot 🤠
@garymonaghan7196 Жыл бұрын
What are the sizes and what tools are you using?
@ramynovver4071 Жыл бұрын
I could watch this 100x and never get it , I’ll just go to mechanic.
@eagleoncloud275 Жыл бұрын
when replace one injector must replace all of them in same time because in few weeks or nex month another injector will stop working
@henryrodriguez8651 Жыл бұрын
Thank you 🫶
@kevin8566 Жыл бұрын
How do you know when the handbrake is tight enough? ( when you use the screw driver)...I was having trouble removing my disk earlier today and had to friggin pull it off..didn't know that was a hand brake hole
@donahue478 Жыл бұрын
What about how to turn off low brake pad light?
@ChicagoNorthwestLimousineElgin Жыл бұрын
Very professional
@edoardomigliavacca9343 Жыл бұрын
thank you so much for making these videos, i've been looking for some that shows how to do stuff to the t23 and only found GARBAGE, thank you very much
@kimquyluu6771 Жыл бұрын
Thank you share clip
@toniviudez6371 Жыл бұрын
What wrench size do you use for the serpentine belt?. Thanks. Great video
@bmt9927 Жыл бұрын
Thank you very much. I just bought a 2009 XF. Your video was excellent. Much appreciated.
@rushnerd Жыл бұрын
Should have spent more detail on the spring pins. They are a huge pain and you showed none of it.
@brackusgolden8359 Жыл бұрын
WTF? I guess you just showing that you know how to change brake pads! You don't even say what tool you're using! This is bull shit!
@VisualPrecisionLtd Жыл бұрын
Wow, no thread lock on the retaining bolts and didn't torque them up! Not a professional job at all.
@luapecraep3007 Жыл бұрын
Well that was very very basic and simple don't NEED VOICE OVER puts pple of listerning whylst doing the jobs great vidio straight forward and dam pleasant too watch no soding balava involved
@musictherapy141 Жыл бұрын
I love my toy Celica gt 2001! Needs front brakes. Wish I had equipment to do myself
@AFatherToTheFatherless Жыл бұрын
No years listed no tools listed = worthless video
@TherealRxph Жыл бұрын
New subscriber thank you for the great video
@sandyskullen2542 жыл бұрын
Hi, could you please explain how to Recalibrate parking brake?, also how do i release it before starting the job without software?, do i use the emergency release switch? thx