Bret McKinney

Пікірлер

@dougpaulr6493 3 ай бұрын

Just want to add, the bulletin says a new connector was added, the reason why was, to prevent leakage and throwing lots of codes. So this settles the Internet argument, just because tranny fluid does not conduct electricity. Somehow, the connector throws codes, when leaking. So, after checking solenoid resistance before dropping pan. I'm convinced, that all solenoids work properly, and changing the harness, should correct problems, as many people, posts talk,about, when researching the connector and internal harness and possibly external harness.

@dougpaulr6493 3 ай бұрын

Thank you. Lots of good info. I was looking for pressure control resistance levels. Mine was coming in at 6.5 ,which is out of range because I have the new Holly pressure control, the bulletin says the Holly could measure 3 to 8. So double triple checking info, saves money and hard work. Lots good info here. TYVM

@leosanchez1683 4 ай бұрын

Porque no tiene audio??

@user-pk6we2gn6s 4 ай бұрын

I have a question I have a 2000 gmc sierra 4x4 turn out the original 4l60e was swapped for 4l80e had it rebuilt I was told it only had one speed sensor but should have 2 front input speed sensor my truck has been working fine until day before yesterday normal acceleration hopped on the freeway got to about 60 and it slowed down and heard a metal thump or grind would that front input sensor have anything to do with that? Trans has been fine until now thank you!

@Bretmckinney 4 ай бұрын

Did you get this fixed? Sorry for the late reply. Sounds like a large internal failure. Overdrive possibly.

@user-pk6we2gn6s 3 ай бұрын

Not yet taking back to the trans shop they don’t have any electrical ppl so I’m trying to rewrite the second speed sensor

@Bretmckinney 3 ай бұрын

@@user-pk6we2gn6s I do have the bottom link that shows the 2 sensors and the pin location…. Sorry I’m not more help.

@user-pk6we2gn6s 3 ай бұрын

@@Bretmckinney I appreciate the help I did find a good video with a lot more detail thank you for the fast response !

@TrevorStruthers 6 ай бұрын

Nice.

@ROSSCO2250 Жыл бұрын

I am little confused with the operation(or lack of) my speedometer.... 92 k3500 6.5 diesel 4x4.. my speedometer does not work i have no codes. I see what I believe to be the speed sensor on tail of Tcase but NO wires to be found anywhere... is it possible the signal comes from tranny? Where do I start to trouble shoot this? Thanks great videos

@Bretmckinney Жыл бұрын

I’m really queries to know if you have 2 speed sensors on the side of your transmission and if your cruse control works? Some newer vehicles only had one transmission sensor on the side of the transmission. I think you are correct about the one on the tcase being the speedometer sensor. It should have a wire going to it. Tell me more about this truck. Is it original engine and trans? I have a feeling someone might have put a trans or tcase in from another year.

@Bretmckinney Жыл бұрын

Also you should have a detent switch on the top of the tcase. Really possible your VSS is just not hooked up. It’s pretty hard to see the wiring under there.

@tylerjackson116 Жыл бұрын

It helped me out i couldn't find in which side of the clip the green and yellow go and had them backwards on the other clip cool thanks man

@avragejoe1 Жыл бұрын

I'm trying to Figure out why I don't have the Wiring to plug into my rear speed sensor, I have a wire that looks like a single plug the size of a pencil eraser with nothing to connect to. so Lost currently

@Bretmckinney Жыл бұрын

Some vehicles need that sensor, and some don’t. What model year you working on? Are you installing a different transmission?

@11688josh Жыл бұрын

So far there's very little electrical wiring and the ECM pin outside c are different from the colors on the plug so there's something probably in between there changing the colors in between the ECM and the VSS output sensor

@Bretmckinney Жыл бұрын

I was thinking they were a twisted pair that went directly to the TCM, possibly a bulk head connector. Are you having trouble with your transmission?

@LsMaloo 2 жыл бұрын

Where can I get a exploded of the transmission like the one in this video? Cheers 🍻

@Bretmckinney 2 жыл бұрын

I would just look on google under images of 4l80e parts diagram. Are you having issues of setting up a transmission?

@LsMaloo 2 жыл бұрын

@@Bretmckinney I have just bought one for a project car and I would be keen to pull it down myself and go over it. While it’s apart I’d like to give it a freshen up.

@Bretmckinney 2 жыл бұрын

I strongly suggest you buy this book when rebuilding your trans. It’s a good reference and has lots of pictures with a lot of transmission specs in it. I rebuilt a 48re Chrysler transmission and I could not have done it without the book for it. www.amazon.com/ATSG-4L80E-Transmission-Repair-Manual/dp/B002LL3UA8/ref=mp_s_a_1_2?crid=1DJCOVQ8AAOPR&keywords=4l80e+book&qid=1653924242&sprefix=4l80e+book%2Caps%2C200&sr=8-2

@davidclement4567 2 жыл бұрын

I have parts to add 2 spool valve Joy stick koyker kit to a 5150 for a front end loader. any help would be great ,

@Bretmckinney 2 жыл бұрын

I’m not sure I will be a lot of help with that. Do the parts have any directions?

@davidkleinsasser9502 2 жыл бұрын

I’m just wondering what is hot for this bearing I got mine running out like 175 the left one always seems to get hotter than to write on

@Bretmckinney 2 жыл бұрын

I would say that’s normal. I think you get above 200’F and the grease might start baking out of it. 600 hours is the grease interval. But that is a lot of hours to me especially if the grease comes out between the housing and outer bearing race when greasing. Best bet to carry a temp gun and run them till they are starting to warm up and then grease or replace if temps don’t go down with greasing. What crops are you cutting? Another one to keep an eye on is the front cylinder bearing. Shut the combine down with cylinder still engaged and jump out and listen for roughness.

@paullucas3 Жыл бұрын

Updated bearing four years ago, maybe 300 hours a year. They will probably go out today because I’m saying this, but they’re still good. Five shots in each bearing every day.. Love my 8120 and hope she lasts forever. Titan in Pella iowa had suggested and installed the new bearings.

@bossmodetubby 2 жыл бұрын

Wait a minute there’s 2 speed sensors?!?!

@Bretmckinney 2 жыл бұрын

2 trany sensors for computer and a sensor for the speedometer on transfer case. I’m thinking after 1992 or 1993 they integrated the transfer case sensor into tcm to be able to get rid of one sensor. Your 4l80e case will still have a hole for one but will be plugged with a cap and the internal tone ring will be missing. This is normal. What issues are you having?

@bossmodetubby 2 жыл бұрын

@@Bretmckinney I’m getting code 24 on my 93 k1500 I’ve already replaced the speed sensor I’m just confused because I see there might be a second speed sensor I’m unaware of

@Bretmckinney 2 жыл бұрын

@@bossmodetubby That code from what I read is for the vehicle speed sensor on transfer case. Is that the sensor you replaced? It can be hard to see or put you hands on. What engine do you have?

@Bretmckinney 2 жыл бұрын

@@bossmodetubby Transmission speed sensor www.amazon.com/ACDelco-24203876-Equipment-Automatic-Transmission/dp/B0013FTZUC/ref=mp_s_a_1_3?crid=55QW2V7YZ3R3&keywords=4l80+speed+sensor&qid=1637605674&sprefix=4l80+speed+%2Caps%2C260&sr=8-3 Vehicle speed sensor www.amazon.com/ACDelco-19302667-Original-Equipment-Vehicle/dp/B00S0FOD14/ref=mp_s_a_1_4?crid=3KR4HPSOWQUFT&keywords=1993+k1500+vehicle+speed+sensor+acdelco&qid=1637605842&sprefix=1993+k1500+vehicle+speed+sensor+ac+delco%2Caps%2C188&sr=8-4

@niuafeafepese792 7 ай бұрын

Plss I’m tryna find where the speed sensor of Yukon 2007xl locate at 🤦‍♂️ is it the same with that one

@jaydepage607 2 жыл бұрын

Could these sensors put your pickup in limp mode

@Bretmckinney 2 жыл бұрын

For sure!!! What issues are you having?

@myguitaryourface5160 2 жыл бұрын

The plug on the side of the transmission gets filled with fluid unplug it blow it out with a air compressor, vasoline it inside and limp mode go's away

@tommyfpv5476 2 жыл бұрын

my 2011 gmc sierra 1500 is having an issue thought the trans was slipping had it rebuilt and still have the same problem I'm lost

@joshshaffer3716 Жыл бұрын

@@myguitaryourface5160 how much Vaseline are we talking about? Fill the plug or just cover the pins?

@myguitaryourface5160 Жыл бұрын

@@joshshaffer3716 I just put as much as possible in it

@destro513 2 жыл бұрын

My VSS plugs were switched and my truck never ran right. I swapped them and this video saved me so much. Thank you

@larryengle8588 3 жыл бұрын

I see your machine has the Vari-draulic drive. Have you used it much? Does it work well?

@Bretmckinney 3 жыл бұрын

Yes they work well. Kinda different to drive. Similar to hydrostatic drive.

@frankwurth5375 Жыл бұрын

That unit looks the same as on my Moline S. Anyone know any thing about them?

@larryengle8588 3 жыл бұрын

Beautiful machines. Glad you guys put the effort in saving and prettying them up. Where are you located? Do you take them to any shows for people to get close up looks?

@Bretmckinney 3 жыл бұрын

Some of them go to the county fair and the parade. They were talked about on a successful farming magazine not to long ago. I think it’s somewhere on KZbin.

@Bretmckinney 3 жыл бұрын

I see you have a 35 that you are using on wheat. Where do you get your parts? We have a parts combine that we used to make a complete 35. Do you know where we could find a cockshut 50’s vintage self propelled combine that’s restorable?

@larryengle8588 3 жыл бұрын

@@Bretmckinney Luckily, I have not needed much yet. I also have my dad's 33. I took the carb off it to get the 35 running. If you look closely, you'll see a diaper on the grain elevator. I'm making a new door for it ... new sheetmetal, a friend is forming new gussets, will remove and reuse the original tension bolt bracket. I needed a new serpentine belt ... got that from V-belts For Less. If you know of any parts machines with the hinged unloading auger, I'd like to get one of those. I'm in Pa. I'm not aware of any Cockshutt combines around here, sorry. There used to be a guy called "Larry the combine man/guy" advertising a parts yard. I think he was in the eastern mid-west area.

@DanMcD80 3 жыл бұрын

Oil in the case connector is a common issue and will cause a limp mode situatiom

@daviddenson3324 6 ай бұрын

Will that also cause the Ign 0 fuse to blow?

@G.W59 3 жыл бұрын

I've had a problem with my 95 4l80. The torque converter won't lock up. I replaced the TCC solenoid cause I couldn't get a reading from it and still having issues. In the middle of replacing the torque converter itself. Hopefully that will do it. If not I may just send it to the shop to get scanned and checked out. ☹️

@Bretmckinney 3 жыл бұрын

Things that come to mind are possible temperature sensor reading low not allowing it to upshift. My dads pickup had that issue and it was the torque converter itself. It would Shift in and out “shuttle shift” then kick it out completely after the check engine light came on. Just because the speedo works does not mean the transmission Computer is seeing speed. I would also air pressure check that the clutch pistons are not leaking air. If it never try’s to shift I would say it’s electrical. I’m no transmission expert though. TPS sensors do go bad... let me know what fixes it.

@Bretmckinney 3 жыл бұрын

Any codes??? Blink codes can help a lot and can be retrieved with a paper clip.

@Bretmckinney 3 жыл бұрын

Yeah high speeds and warm harvest temperatures cause a decent amount of issues which these bearings. Greasing any pillow block bearing is a “shot in the dark” if any grease got in the bearing itself. Fuel lines back by the fuel tank are known to wear in places causing fuel issues and fires. On our 8120, our lines are showing cracks. I don’t think the fuel lines from the tank are steal braided either.

@timnichols9015 3 жыл бұрын

The salvage yard near me says when the right one goes it sparks and it's right below the fuel tank so good to replace them ahead of failure

@Bretmckinney 4 жыл бұрын

I’m glad I was able to help someone. I spent over 40 man hours looking over my transmission to find that ring missing. Let me know if you need any other help with your electronics on your trans. I sure learned a lot!

@Naser_astronomy 4 жыл бұрын

Bret McKinney hey I have Gmc suburban 2000 , the truck does not move in any gear , in other word , when I’m shift gear to D,R,3,2,1 the truck does not move ? Please need help.

@diduck6878 3 жыл бұрын

@@Naser_astronomy 8-12 quarts of fluid?!. Does it have a filter?

@LC-fl3zm 4 жыл бұрын

You really helped me out I had to replace my transmission in my 02 2500 and the abs light is on the speedo don’t work and I don’t feel it shifts quickly enough I replaced the seed sensor o the transfer case but that didn’t do a thing I found that my output sensor has a plug instead of a sensor so I ordered a new output shaft hop it has that relucter wheel thanks for you video

@diduck6878 3 жыл бұрын

There's also 3 sensor's on the transfer case

@dave06278 4 жыл бұрын

Sure do miss those old trucks and hearing the jake brake. My grandpa had an old 4300. I spend so much time in that as a kid.

@larsonvalleyfarm 4 жыл бұрын

Now thats a cool line up

@MrChiki1911 4 жыл бұрын

Thanks for this

@Bretmckinney 4 жыл бұрын

Give me a call about what parts you need. I have some pictures I can send you of what we have. 509386fourthreethreeseven.

@Bretmckinney 4 жыл бұрын

I will check and get back to you on that one. I’m not sure.

@Bretmckinney 5 жыл бұрын

There is another guy that has over 60 videos on here on how to restore a 33 Oliver. My dad owns many older self propelled combines that we have painted and restored close to factory looks. Not all of them are in field running condition, but they all move under there own power. I will Poste a video when we get them all out later this summer. Restoring a combine is not for the faint of heart, it is a lot of work and takes a lot of time to make it run again. Let me know if you have any questions. 90% is self explanatory. We cut the header down 2 feet so it is easily stored and transported on a 5th wheel trailer....

@masonsieber8779 2 жыл бұрын

I am looking to purchase a running Model 33 do you have any for sale?

@Bretmckinney 2 жыл бұрын

@@masonsieber8779 We have a restored model 33 but it’s not for sale. Very hard to find parts and or a machine that is in good enough shape to restore.

@masonsieber8779 2 жыл бұрын

@@Bretmckinney Thank you for the response. I'm hoping to find the connections to get my hands on one

@Bretmckinney 2 жыл бұрын

@@masonsieber8779 I will keep my eyes and ears open for you but they are getting hard to come by. We are looking for a cockshut combine. 50s vintage.

@larryengle8588 Жыл бұрын

@@masonsieber8779 I have a 33 that I'm looking to sell. Last used about 15 years ago, shed kept always since we've owned it. Needs carb and header auger repair to be functional again. I can send pics if interested.

@isaacjibben8099 5 жыл бұрын

It would be great if you could post more videos on your progress with the this combine as I am considering restoring an Oliver 30 combine and it would be great to see what everything looks like before I take it apart!