Ronald Urbina

Пікірлер

@pnwadventures2955 3 күн бұрын

The tamiya was broken? worst offroad performance on youtube

@noahsedillo5470 Ай бұрын

Since these screws come with blue lock tight on them already do I need to add more on the initial installation?

@renohuskerdu4592 2 ай бұрын

How many inch pounds to torque the screws?

@christopherdayao-y6p 2 ай бұрын

are you using the standard iron sight?

@allihatw 3 ай бұрын

Do you speak?

@franzdetroit 4 ай бұрын

You better torque those screws or you will end up like me finding a gunsmith to remove said broken screws

@RonaldDannewitz 5 ай бұрын

The screws break

@BigDaddyLanny 6 ай бұрын

any idea if this will work with the vortex AMG UH-1 gen 2? could you measure from top of the pic rail to centre of the magnifier for me?

@Truevb 6 ай бұрын

Nice video! what are your thoughs about the magnifier? It worth it?

@RonnieWanKenobi17 6 ай бұрын

for the price, it works just fine and perfect for target practice. its not as fast as the other magniifiers without the button to release positioning.

@michaelboyle9512 7 ай бұрын

Great video. I think I'll get one.

@calvinl5726 7 ай бұрын

Bruh this is one of the worst comparison videos it's so disorganized

@user-uv4mg4ve9p 8 ай бұрын

I installed one on my Glock 19 and love it. It's even easier to install if you take the slide off.

@jablack68 8 ай бұрын

NOT USING LOCK,TIGHT

@Mako-sz4qr 8 ай бұрын

I didn’t take any chances with the SCS screws on my G45, I went with the Battlewerx screws. I don’t wanna be that guy with the screw breaking off in the slide.

@liamcraig374 8 ай бұрын

Looks like battlewerx has a couple different height screws for the scs mos. What size height did you order in order to install the sight? I’m looking at getting them for same reason you did.

@B-20FrOmDA816 2 ай бұрын

I wanna know as well

@Mako-sz4qr 2 ай бұрын

17 inlbs on the torque with blue lock tight

@B-20FrOmDA816 2 ай бұрын

I just ordered the screws that where made in the US for the scs with blue lock tight

@B-20FrOmDA816 2 ай бұрын

@@Mako-sz4qrwitch screws?

@ogengndeso2672 9 ай бұрын

Verry good

@davidbennett5905 11 ай бұрын

How long did the screws from holosun last?

@lorenzomodini2335 Жыл бұрын

The sting of the scorpion will stop the annoying chirping noises of the cricket!!!

@lorenzomodini2335 Жыл бұрын

Amazing close-up of a scorpion eating a cricket

@lorenzomodini2335 Жыл бұрын

I think this Jerico scorpion, Nebo hierichonticus, is eating a Field cricket, Gryllus campestris.

@Citizen2ACitizenLLC Жыл бұрын

Very nice set up. I just sent my 19x slide off to get cut for a 407C-GR X2. kzbin.info/www/bejne/jXq8hqqsnK1gmrc Thanks for sharing. Just sub'd

@esckoblickz97 Жыл бұрын

Where to get a replacement for the little plate in the rear he un screwed

@herbfuerst4080 2 ай бұрын

The Glock store. He has a utube channel

@GriffinRivera Жыл бұрын

There is no mounting plate needed?. Clever design.

@Lyndonbtv Жыл бұрын

walang plates?

@xYanohn Жыл бұрын

Tu sert à quel couple ?😊

@newjetcity1865 Жыл бұрын

Umm where’s tha optic plate

@corvetteman0714 Жыл бұрын

Ummm, doesn’t need one.

@GTacticalJody Жыл бұрын

Lamp and kitchen lighting won’t charge these things u need sunlight, I sold mines thinking it was tweaking.

@rcinhand9671 Жыл бұрын

If you locked the diffs on the Tamiya, it would have done a lot better.

@bkgaming7880 Жыл бұрын

I would've put some lube under the optic

@markcole6475 Жыл бұрын

What was the purpose of comparing the WPL car with the Broncos?

@Drewski423 Жыл бұрын

Hmm. No adapter plate needed for the SCS? Noted

@renohuskerdu4592 2 ай бұрын

Not if you buy the SCS in MOS version.

@Cabbage2A Жыл бұрын

where did you get a green label Glock are you out side the us i believe green labels are us made Glocks for export

@kenyattalemonetv1 Жыл бұрын

Any reason for not using the lock tight screws?

@frankenelimtangco2400 Жыл бұрын

Cause it already has

@renohuskerdu4592 2 ай бұрын

@@frankenelimtangco2400 Lock-Tite is for single use.

@Myth_rd Жыл бұрын

So the adapter plate isn’t needed?

@Hamish_Whitehaven Жыл бұрын

not on this holosun model (SCS)

@lanced3256 Жыл бұрын

Hey a question, os the slide which came with the pistol steel aluminum or plastic? it sounded heavy when you put it down

@Hamish_Whitehaven Жыл бұрын

old ones metal new ones plastic

@venemous8884 Жыл бұрын

@@Hamish_Whitehaven false all glock slides are metal

@JSpidey Жыл бұрын

@@venemous8884 He was confused and thought the OP meant the mount cover (forgot the official name). Those are plastic now, they used to be metal.

@mikeprice8307 Жыл бұрын

So why is everyone saying these MOS versions need tall suppressor sights for these RTRs?

@raking954 Жыл бұрын

The scs is a direct mount unlike the other ones that require mounting plate

@chsaad4071 Жыл бұрын

The pleasure of having this beauty

@82dirtdart Жыл бұрын

You should have removed the sticker. It’s in the mounting channel of the optic.

@jackinyoubaby Жыл бұрын

What sticker?

@jackinyoubaby Жыл бұрын

Oh I see it now. Wonder why it has a sticker on the bottom. None of my 3 Holosuns have a sticker there

@markusvolmari Жыл бұрын

There is no mounting plate needed?

@rip9551 Жыл бұрын

Not for the MOS slide variation for glocks

@spokanesurvivaltrainingand5797 Жыл бұрын

I don't know why but it weirds me out that you didn't take the slide off

@mikerobinson8734 Жыл бұрын

Why? That weirds me out that you think that’s weird…

@October19x Жыл бұрын

😂😂😂

@Lfm2113 Жыл бұрын

I didn’t notice til I saw your comment and now I think it’s weird too 🤣

@whytebredd Жыл бұрын

Use your words

@TheNorthsquad Жыл бұрын

Take the slide off the pistol to do this

@noHandle1776 Жыл бұрын

Lock tite and proper torque are keys to a reliable mount. You missed those. Marking the screw heads helps if issues before problems tol.

@bobjarrard Жыл бұрын

screw already came with Blue LT - lots of folks skip the torque wrench, actual real shooters, and go snub plus an 1/8 turn or so. I have tested torque wrenches and unless calibrated fairly often they go out of spec. Bob in Nevada

@Falling-faster 2 ай бұрын

@@bobjarrardthank you I thought I was being a hack but that’s how I’ve done it now for years. Literally did it today lol

@wread1982 Жыл бұрын

Hello sir thanks for the video, can you see the green or red dots better? I’m wanting the Holosun with the ring around the dot thanks

@RonnieWanKenobi17 Жыл бұрын

yes. i prefer the tiny green dot though compared to the one with Halo. makes me see my target better :)

@tonyrosel1906 Жыл бұрын

The instructions suggest using Permatex blue threadlocker on the mounting screws.

@RonnieWanKenobi17 Жыл бұрын

yes i bought one a few days after then reinstalled it again with new screws :)

@KPad87 Жыл бұрын

Does it hold its charge if left in the gun case?

@noHandle1776 Жыл бұрын

Yes, it only needs Alot or light from time to time.

@renohuskerdu4592 2 ай бұрын

On a full charge the battery will last 20,000 hours.

@ivanfabijanic1772 Жыл бұрын

Majstorsk !!!

@21Fxlrs Жыл бұрын

Just an idea you should get some paint pens to mark the screws should they move on you.

@Woodstock271 Жыл бұрын

Good idea. My Holosun did get loose for the same reason his probably will. I took off the plate and screwed the optic on but forgot to clean the factory oil out of the mounting holes on the slide. The blue Loctite on the screws did nothing. The optic was a little loose after a hundred rounds at the range. I took it back off and cleaned out the screw holes with alcohol on a Q-tip, then added new Loctite and torqued it back down. Been solid ever since. Lesson learned.

@RonnieWanKenobi17 Жыл бұрын

Thank you for suggesting. I will do that :)

@mikeprice8307 Жыл бұрын

@@RonnieWanKenobi17 so why is everyone saying these MOS versions need tall suppressor sights for these RTRs?

@JSpidey Жыл бұрын

@@mikeprice8307 You don't need suppressor sights with the SCS, the SCS mounts directly to the slide and co-witnesses with ironsights. Most RMR's require a mounting plate and they tend to sit much higher.

@mikeprice8307 Жыл бұрын

@@JSpidey do you mean stock height sights? Glock sights are not iron.

@simonstokes369 Жыл бұрын

Clever design

@freedomgorilla1 Жыл бұрын

Such a clean look

@MaxxPainII Жыл бұрын

Nice video, what interior did you use in the Tamiya Bronco. Thxs

Ең жақсы KZbin

Пікірлер