Might be worth considering LR on the beam lasers. Not sure if these are efficient thermal vents but LR goes a long way with thermal vent as the amount of heat you shed through it is subject to the fall off - long range removes the fall off totally!
@benniebeesАй бұрын
What I don't get about thruster boost in this game, is that whenever I use it, it just creates way too much distance between me and my target. The boost activates, generates way too much speed, and my manouvering thrusters can't keep me in course. I don't get how you boost and keep your target in range like this.
@joetriccasАй бұрын
When the boost kicks off, use boost up/down/left/right to shed some of the direct forward speed
@mailmaster77Ай бұрын
Any link for the build?
@grahamhill676Ай бұрын
How did you get this?
@v4pilot331Ай бұрын
From the getting place.
@v4pilot331Ай бұрын
here is a better video... kzbin.info/www/bejne/mp2ccplsp9qfq7s
@houligan52542 ай бұрын
what is your build?
@RjNartoPlays2 ай бұрын
@@houligan5254?
@houligan52542 ай бұрын
@@RjNartoPlays In this game you can configure your ships differently. I am wonder how he has his cannons tuned mainly.
@v4pilot331Ай бұрын
@@houligan5254 short range, high yield.
@RjNartoPlays2 ай бұрын
W footage what's the game
@houligan52542 ай бұрын
Elite Dangerous
@RjNartoPlays2 ай бұрын
@houligan5254 okay
@j.mangum76522 ай бұрын
All done while wielding ancient Earth artifact, the Foreigner Belt.
@88Bulko2 ай бұрын
Honestly, GofG vibes :D Nice vid!
@FRISKY_MANDINGO2 ай бұрын
I just want to know how you get so close to the planet rings in super cruise. Whenever I drop from super cruise I undershoot it and have a ways to go still, or I go too far and it forces me out and my ship gets all grumpy :(
@roguereaper13302 ай бұрын
Came for the light show, stayed for the music. 🤌👍👌
@EverydayNormieMadafacka2 ай бұрын
Some sheriff form another century vibes, keep it up! ❤
@squirrellordsgaming27722 ай бұрын
Loving the music section 😊
@FrantisekProchazka-to6ed2 ай бұрын
Nice, i can barely keep it up in low cz zones :D
@FenrirAsoL1173 ай бұрын
It's a alien ship?
@v4pilot3312 ай бұрын
Yes, a Titan... it is on Thursday 10/17/24.
@FenrirAsoL1172 ай бұрын
@@v4pilot331 Oh ok, i ask this cause i just started to play :)
@v4pilot3313 ай бұрын
@25:30 Taking out the heat vents.
@v4pilot3313 ай бұрын
@27:22 I nail the core...
@v4pilot3313 ай бұрын
@9:32 Neo Prophet nails the core...
@jbloun9113 ай бұрын
Looks like a good thrust and cut blade
@josephclaire50183 ай бұрын
Do you have a Coriolis link for this build?
@lashropa3 ай бұрын
Satisfying.
@v4pilot3313 ай бұрын
Miss you Brother...
@lashropa3 ай бұрын
Got a new moto, huh? 🥰
@JomasterTheSecond5 ай бұрын
The world needs more trackballs.
@lashropa5 ай бұрын
Yeeeeeeerreah dog! ❤
@v4pilot3316 ай бұрын
It needs Huey's and Cobra's...
@v4pilot3316 ай бұрын
Right before the old girl was retired...
@O.LEO.N9 ай бұрын
😍
@v4pilot3319 ай бұрын
kzbin.info/www/bejne/i3mxd6Z9e9GYnZo
@corruptionisrife Жыл бұрын
Mean while most men are out meeting girls, playing football and riding motorcycles….feckin Nerd
@v4pilot331 Жыл бұрын
Here is a link to the original reddit thread that is related to this video. www.reddit.com/r/armoredcore/comments/174n1ak/aliens_inspired_loader_ac/
@eastontanner6919 Жыл бұрын
Interesting, I don't know if I've ever seen a Rickenbacker bass in any kind of sunburst
@irontail4264 Жыл бұрын
She's a beauty!
@content-appreciator Жыл бұрын
1962 50th anniversary Reissue. Limited edition, only 1,962 made worldwide. Great taste.
@v4pilot331 Жыл бұрын
This is what I'm talking about...reverb.com/item/65256121-1965-epiphone-crestwood-custom-pacific-blue
@Bluemax54 Жыл бұрын
I want to get a XV.
@v4pilot331 Жыл бұрын
There are a lot of good choices out there for an XV. Some of the other Oakeshott types are more difficult to find accurate museum replicas of.
@Bluemax54 Жыл бұрын
@@v4pilot331 I'm just starting my collection. I have two long swords and two sabers, two to three hundred dollar range. I've got an Albion on order but I'll have to wait another year for it. I'm watching all the videos I can.
@oldb-1kenobi2 жыл бұрын
Pretty cool, any upcoming saber videos planned for the future?
@JagoOfBellhaven2 жыл бұрын
After years and years of wanting a sword I'm getting ready to purchase my first and this is the one I'm going to get. I'm sooo excited! Thanks for the review!
@madfrosty52282 жыл бұрын
Do some cutting if you can please .
@rogerwilliams26292 жыл бұрын
Beautiful sword! About to buy my first longsword and the variables are. challenging! LOL. Thanks for the review.
@sherlockxia30612 жыл бұрын
This is my dream sword! Hopefully I will be able to purchase it one day with my own currency!
@Dmoriarty19932 жыл бұрын
Apparently, you like swords 😄
@Mike_Jones683 жыл бұрын
Sick vid..luv the song perfect for this ride
@v4pilot3313 жыл бұрын
Thanks for the reply... Maiden perfect.
@v4pilot3313 жыл бұрын
At 3:05 Todd hits some wheelspin.
@bobtimster623 жыл бұрын
Is there a way to turn down the overall volume of the saber, as opposed to doing it font by font? The sound on my Asteria heart is very loud. My Asteria heart is subject to false clashes and blaster sounds with some of the PS sabers, but not all of them. Seems to depend on the hilt. For some hilts, the heart is a little loose in the hilt, and that is what causes the problem. Sometimes, taping some pieces of cardboard around the inner part of the hilt to secure the heart works, for others it doesn't. Putting masking tape around the inside of the hilt doesn't work either, because then that makes the heart too thick to push in for some of the hilts. I have a second Asteria heart that doesn't have that problem, but the volume on that one is very low, and I don't know how to make the volume louder on that one. Anybody have any suggestions?
@v4pilot3313 жыл бұрын
You have to edit the "effect.txt" file for each bank that is giving you false input. Turn the volume down one, save the file, rinse and repeat until the false input stops. You can also download the latest firmware that is supposed to have better filtering capabilities from the Pach Store.
@bobtimster623 жыл бұрын
@@v4pilot331 Unfortunately, that was the last thing I tried, some time ago. It didn't work. That's why I asked. Didn't know there was any new firmware. I'll have to check it out. It seems strange that the volume on two different Asteria boards behave so differently.
@mrcool96723 жыл бұрын
Looks Kickass, thanks for sharing 👍🏼
@v4pilot3313 жыл бұрын
Thanks. I wish this game was more popular. I think that has a lot to do with how they have Multiplayer setup.
@TurboJunkRemoval3 жыл бұрын
I live around turn 9 irl😂
@v4pilot3313 жыл бұрын
I think about the track every time I drive by.
@v4pilot3313 жыл бұрын
Something I forgot to mention as well as a minor correction... That fishtail pommel will also work well for striking. It looks like I purchased this sword Feb. of 2019 not 2020... I was off by a year.
@v4pilot3313 жыл бұрын
A couple of things I forgot to mention in the video... blade steel is 6150 CNC milled. Also, of all of the swords in my collection, this one did come the sharpest from the factory. I did not order Kult of Athena's sharpening service. I believe the tang is threaded, however, someone at A&A should confirm that for sure. Although a bit heavy at 3 lbs 9 oz, it's still a full pound lighter than that United Cutlery Glamdring wall hanger on the far right. The BP's few ounces of extra weight disappear once in the hand due to it's exceptional balancing and feels like an extension of your arm... that's the best way I can describe it.
@illdoodle47483 жыл бұрын
Do you think if you changed the EQ on the Evo Flex it might sound a little better?
@RandomStuffGarage6193 жыл бұрын
The green looks great on camera. Is that a neopixel photon blade? Looks awesome, I might need one someday... If I ever get a better luke hero. (7even chambers MoM if I can, but most likely the new korbanth)
@OrganicGonzalez3 жыл бұрын
Quick question, I’m new to lightsabers and I got my 1st Highborn Asteria neopix blade but, how tight are the retention screws supposed to be ? Light, medium, TIGHT?
@v4pilot3313 жыл бұрын
Just tight enough for the application. For example... if you are going to be heavy dueling, cinch it down tight, but don't overtighten it to the point it deforms the blade or pierces the polycarbonate. For all other applications, just snug up the retention screw just hard enough that when you swing the saber it is not wobbling at the emitter during light tippy-tappy action. Probably not the best explanation but it should suffice.