11 ай бұрын
11 ай бұрын
Жыл бұрын
Жыл бұрын
Пікірлер
@SHW372 9 күн бұрын
Great video!!!
@nowayoutstp4 9 күн бұрын
I’d love if they had lockers from the factory. 🏭
@Combatkid174 Ай бұрын
Excellent video. Thanks ..
@Jvak1999 Ай бұрын
Is this theee Cody Johnson?!?!!!?!!!?!!!?!?!?!?!!!!!!!!?????!!
@bcasey101 Ай бұрын
What size bush hogs can you run on these little tractors?
@Macbookpro19991 2 ай бұрын
can you wheelie it?
@wkb8326 2 ай бұрын
Just bought one this week. Great machine.
@J5TRACTORS 2 ай бұрын
Congratulations on your new Tractor.
@pvwjr 2 ай бұрын
Do you know of anyway to enclose the bed so it is waterproof and dustproof? Hardside would’ve preferred.
@davidwatkins6687 4 ай бұрын
You didn’t tell us anything
@MelonMan05 6 ай бұрын
How does the air work in it
@J5TRACTORS 5 ай бұрын
The A/C works excellent it can get a little cold on the passenger side but the driver is very comfortable
@BrettinFLA 7 ай бұрын
Wish they would come out with a 4/5 seat crew model
@KerlinaJacks 7 ай бұрын
The farm product company sales fake machines
@KerlinaJacks 7 ай бұрын
You want me to stop and you haven’t get Jerry vann and his son arrested, get them arrested or you should tell them you want me back to Texas and I’ll come down to you
@KerlinaJacks 8 ай бұрын
Everyone let keep this comments going bcos J5 tractors 🚜 products are fake and unworkable machines and farming tools
@theMacGyvercom 8 ай бұрын
Awesome video. Very informative. And thanks for actually letting us hear how it sounds while going down the road. What kind of audio systems are available for these?
@J5TRACTORS 8 ай бұрын
They are plenty of audio options. We like the self contained all in one systems like the one from Boss Audio super easy to install extremely weather proof and sound great.
@KerlinaJacks 8 ай бұрын
They sell fake trucks and parts all there workers also steal from unlicensed dealers
@jmartin9059 9 ай бұрын
*What should be done to fit 235/85R16 or 215/85R16 Commercial TEN-PLY tires on ROXOR 2024 HD ? Would tire rub on some part of body or chassis be a problem or possibility when fitting those sizes onto factory rims 'without' wheel spacers ?*
@J5TRACTORS 8 ай бұрын
You could get 1.5" or 2" wheel spacers.
@ryanday3583 9 ай бұрын
how many rpms does it run doing 55
@ryanday3583 9 ай бұрын
also wondering if it has a rpm governor i know its limited to 55 but is that off speed or rpm max rpm is 2700 rpm. like if a kid drove it they would not be able to blow it up.
@J5TRACTORS 8 ай бұрын
@@ryanday3583 The governor is set to speed not RPMs but there is also a rev limiter
@aubreyfortner7209 9 ай бұрын
What is the asking price
@leemangilley3891 9 ай бұрын
My volunteer fire department is looking into getting one of these as an off road rescue unit / brush fire unit. Only hiccup is most skid unit manufacturers dont make one to fit this . I was wondering what the dimensions of the bed are? Both total width and the width between the fender wells and the length of the bed? We will most likely have to have one custom built so the dimensions would be helpful thank you
@vintage-jm2fv 10 ай бұрын
70hp mahindra. Never knew this. Now faced with 3 days to split it apart.
@bonjovi1354 10 ай бұрын
here in india we get 130bhp 300nm trque 2.2 L diesel nd 150bhp 350nm torque 2 L petrol both automatic nd manual
@dougpringle8938 10 ай бұрын
Yes they made them so that they can't be modified to get more HP out of them for the market in the United States
@lovepeacehatewar9818 5 ай бұрын
Actually Made for Rular Area, Villages, Farmers Areas, Can't drive on Highway as per the Aggreements. Smaller than India. So No need of 100bhp + 100 Nm Torque. So Enough for here.
@benburkhalter3752 10 ай бұрын
Have you figured out a way for a live 540 PTO and a HYD spool valve kit? This is a perfect platform for a small operation. You can pull an 8 to 10 ft shreader, post hole digger,ECT with that axle ratio. Especially if you use low range you could probably pull a plot master or 6 ft disk better than any other SxS could.
@Sdvaughn04 10 ай бұрын
Is it for sell? How much?
@KerlinaJacks 7 ай бұрын
Don’t buy from them it’s fake it always faulty
@avineld84 10 ай бұрын
I would like if they brought street legal one it is awesome machine. Un fortunately sad😂
@benburkhalter3752 10 ай бұрын
There's ways to do it. I know a man that has an LLC in Montana. One of his sidexsides is has all the light requirements and has a Montana title and LP for it. He can drive it in Texas except for the Interstate highways.
@benburkhalter3752 10 ай бұрын
Have you figured out a way for a live 540 PTO and a HYD spool valve kit? This is a perfect platform for a small operation. You can pull an 8 to 10 ft shreader, post hole digger,ECT with that axle ratio. Especially if you use low range you could probably pull a plot master or 6 ft disk better than any other SxS could.
@mikefrench3800 10 ай бұрын
Is there any reverse lights or rear hitch options?
@wondering_mind_ 10 ай бұрын
Yaa😊
@mikefrench3800 10 ай бұрын
thanks@@wondering_mind_
@J5TRACTORS 8 ай бұрын
Reverse light is standard equipment and yes there are several rear hitch options.
@VocalVirgo 11 ай бұрын
On a motorcycle, you can just change the sprockets to allow a higher top speed. But how would you get this one, with that crazy high final drive ratio to get past 55 mph? It’s governed at 55, but I wonder if there is a way with a tune, that you could increase your top speed and not really make the thing slower. And I’m sure just like the 2.5 L engines, there’s got to be some way to increase the power output by a lot. And if you have the manual, locking hubs, if you unlock the front hubs, you should also be getting better gas mileage. This thing is so old school in almost every way. This could make the perfect daily driver, especially if you live in a gridlock city or in the country with lots of county roads. The salesman forgot to mention that the HD comes with beefier Springs at all four corners, and the HD also has gas shocks at all four corners, which would make the ride much better. And this thing is built so old-school, the entire thing is heavy duty, steel, underneath, and the body panels. The hood is two layers of steel. This thing is built like a small tank. In theory, this thing should last forever, especially with that extremely tried and true diesel engine, and the heavy duty transmission. #IIsAFan.
@aaronautry1981 10 ай бұрын
I'm totally in the same boat of opinion as you. This thing has so much potential!
@JulioforChrist 6 ай бұрын
I've heard it's on Dana 30 and Dana 40 axles. So you should be able to lower the gear ratios with something of a jeep or order new gears online. The other way is to replace the transmission with an overdrive model jeep or something if you want to keep the tall gears, but not sure about the engines' bell housing pattern.
@lanejohnson7656 5 ай бұрын
It’s my understanding the ECU is encrypted on the 2023-2024 to prevent tuning. I wish the 2023-2024 were more popular so maybe a aftermarket company like Holley or Fueltech would make an aftermarket ECU for them. They would likely be faster with just the limiter removed. I’ve yet to drive one, but really interested in getting one once my Harley is payed off.. Pretty much a WW2 jeep and an old mail man jeep from my understanding, just with a turbo diesel.. Granted the old mail jeep I drove was pretty beat up and clapped out, you didn’t really want to drive it past 55mph.. lol. MY understanding is the late models are pretty low geared so pretty well suited for much taller tires.
@J5TRACTORS 2 ай бұрын
The 23-24 models have 5.38 gear ratio. Even if the governor is removed the top speed will not be much higher than where the governor is set. This is different than the previous models that had a 3.73 ratio with the governor removed those units will do in excess of 85mph. The gear ratio was lowered to match the governed speed as 5th gear was almost useless in the previous models.
@adamton7274 Жыл бұрын
Does the 2023's HD require Def?
@J5TRACTORS 11 ай бұрын
No it does not
@KerlinaJacks 7 ай бұрын
This total fake and faulty product stay out of their page it’s important for buyers to know the right product
@KerlinaJacks 7 ай бұрын
Stop patronizing J5tractors and farm equipment
@tadde948 Жыл бұрын
P r o m o s m 😕
@LouisAndrillui Жыл бұрын
I have a 1526 that the clutch will not disengage. Is there a way to free the clutch once its seized? And how do you adjust the clutch?
@J5TRACTORS Жыл бұрын
It is possible to free the clutch without splitting the tractor although this method is not guaranteed to work and can damage the transmission if not done properly. Get the tractor moving in the highest gear possible, press the clutch down and press the brake with enough force that the machine bogs under stress from the brakes. Hopefully this will free the clutch again I would be very careful on how much stress you put the transmission under and it is best to split the tractor rather than try this.
@davidgeorge3714 2 жыл бұрын
Thanks for your video. No one ever told me that and my clutch seized on my flywheel.
@blainehall6094 Жыл бұрын
Same problem here, any diy fix?
@hntfsh_liebchen373 11 ай бұрын
I might have the same problem. Did you guys fix the issue?
@angytzunun6260 2 жыл бұрын
As