Need to have the camera closer

Straight chain would have given you 60 with out the sprocket

I have a 97 what do you recommend for a lift?

I have a gts mini bike and mines wont start up

Are you in Oregon??

I had to use those stickers a few times.

Any chance you can make a video on replacing the timing belt and tensioner for this car?

Why the phuck does that thing have such huge motors? It's on screws. That thing is a brutally slow pig. When you try to spin those motors fast they don't have any torque. I think it's hilarious that JD's garage makes an even sshitier clone of this thing lol

I have a blue one like that

I would’ve never thought a little dirt on my plug would be the problem my carb was dirty clogged jet cleaned it still no start plug was black but had spark let it sit in gas cleaned it fired right up first pull… thanks for this eye opener bud

Could I get the link to the torque converter

so is the srewdriver how you test the coil?

Sk tools sell for lots fyi

The cone is a blade balancer for lawn mover blades 😅

Honestly a lifetime of tools for 80 retail at least 18000 in today’s money

I know every tool in that box

Great video. Did you need to reinforce the holes you cut in the frunk to keep some rigidity? Would this have worked without putting the hole in the bottom of the frunk?

AutoZone did me wrong too ! 😭😂

How fast does the bike go? i know its 3 years old but plz respond back to my comment

if you can't find a junked old army pickup to get one, what other trucks or vehicles work for a 70 c10

Where did you get that engine plate

What did you use for a triple tree? I'm building a custom bike using a atc 200x tree right now

Is this a 3 speed th400?

If you take off the two bolts for front housing it pops out enough so you don’t have to take off the whole axle

Nic video dude.

Sheesh you've had internals done for 47 mph. I have a bt200x, with a juggernaut, red spring in last position, 50 rear sprocket 14 tooth on the driven...120 main jet, governor bypass straight pipe with mini silencer and I hit 52mph.

Bro do you know where or how to read the check engine codes on this thing?

Bro do you know how to read the check engine codes on these things. I cannot find anything for the life of me

I have a similar lawn mower, and so much grass gets under that plastic cover that it rots and almost smells like cow dung. And the more you mow the lawn, the more grass goes into it, making it very heavy.

Hey boss, I saw your removed the dowel pin from the trans. Did you have to also remove the 2 dowel pins on the 2gr block?

I have the same wheels for my 2003 Supercharged Vibe. I had to install 5mm spacers to clear the calipers. I also installed Dodge Journey wheel studs which are a quarter of an inch longer to give me the 8 turns I needed for the proper lug nut engagement.

I just picked up a 2005 Vibe GT with 335k from the 2nd owner who had it for 15 years and ran Mobil one in it. Going to do a compression test and see how it looks. Has a rust hole right behind the front control are mount so I plan on parting it out as it has a bad clutch, cracked windshield and rust along the top of the windshield. This car will be parted out so other GT's/Vibes can live. I did cut a Vibe in half to see how it was constructed and under the pinch welds, there is another frame structural member running the length of the rockers. These cars are built tough. I have 7 Vibes in my driveway right now. 8-)

My dad built a pole barn back in 1999 and it had a dirt floor for years . Never kept us from doing anything 👍

Is T4 okay to use?

What we call those little wheels that spin the belt . My mover belt broken and found out 2 of those little wheels not spinning like in this video but Lowe’s don’t carry those parts . I want to order them online but don’t know if it is really called wheel ??

What brand is the building? Looks real heavy duty compared to some other metal buildings.

Very helpful! Thank you for being thorough and saving me a lot of time so that I didn't have to learn from trial and error.

I’m doing the same thing myself and your videos are great! I hope to post my project at some point.

Any idea if 235/85 r16 would fit a stock rodeo without lifting it.?

Looks like a sweet kart. No wobble no bouncyness. Looks solid. Top speed in the 35 to 40mph?

I building a na for my daughter gets gets her license I 2 weeks. Enjoying you videos. Thank you.

What does the retainer washer look like that holds the blade

Gosh I hate to see good cars like that rusted out.

I put mine together last year from sitting for 3 years but now fraustrated on where to go to start i already downloaded their program i heard its a lot of learning not including air pressure and all that

What kind of insulation is that on the walls? Ceiling? Thanks.

My son bought me one of these two years ago. It worked on about a dozen pieces but then wouldn't stay running. I couldn't figure it out & there aren't enough places around my area or people with experience with trouble shooting & fixing. You video is one of a very few. Keep up the great work.

The guides on the sword out of adjustment or the blade is no good and it's wandering and not the proper adjustment on the blade tension

This is by far my favorite project. I thought you said it has master or slave cylinder leak. It seems I skipped it or you skipped that part.

The shift selector?

What is that part opposite side of the modulator? Mine is leaking, trans shifts hard in reverse