Even though I consciously understand how laser cleaning works, it still seems like something out of science fiction.
@superbmediacontentcreator2 ай бұрын
You are holding the head too far from the surface. If you understood physics your technique would be more effective. Mathematically, the decline of this type of light is linear, inversely proportional to the distance from the light source (I = 1/d where I is intensity and d is distance). This means that the light intensity (set by its brightness) will diminish (at a fixed rate) as it travels from its source.
@Boodieman722 ай бұрын
I am doing my best to hold it at the focus point of the laser on the surface. Further away or closer causes the laser to go out of focus.
@lucasseal12 ай бұрын
@@Boodieman72 that comment is a bot.
@KirbyEnthusiast2 жыл бұрын
Pretty Cool
@guitarplayerforu2 жыл бұрын
Great riding and great video 😁🏍️
@cburgz36973 жыл бұрын
120V or 230V version?
@cburgz36973 жыл бұрын
Just noticed this was answered below
@Boodieman723 жыл бұрын
120V
@MrBod4life3 жыл бұрын
Totally awesome! I understand the hose hooks up to the vacuum but where does the other cord hook up to? Air compressor yes? How long is this cord because I have my air compressor on opposite side of garage as my vacuum. Thanks man!
@Boodieman723 жыл бұрын
Yes it connects to an air compressor. I have a 50 ft air hose on my compressor, I think the one on the toold is maybe 5 ft. I think they discontinued this version but have something similar.
@MrBod4life3 жыл бұрын
@@Boodieman72 Thanks for replying man. So do you take your 50ft hose and directly plug it into the tornador vac or do you connnect the existing 5ft coming out of the tornador to your 50fter? The one that autogeek sells is the one I currently have and its much too big and cumbersome. I definitely like this setup much more.
@Boodieman723 жыл бұрын
@@MrBod4life I connect the hose to the tool. The tool as a quick connector on it.
@MrBod4life3 жыл бұрын
@@Boodieman72 ahhh i see that now after reviewing your video once more. Thanks man! You still like it? subbed to your channel btw. I also have a vapor rhino. Awesome steamer
@TreasureWOMAN3 жыл бұрын
wow alot of snow wish it snow like that by me
@CheckerTravel3 жыл бұрын
Good job 👍
@KQuinn6724 жыл бұрын
sounds like a nascar race or a thousand wasps coming at you...but it looks awesome!
@vinceg68944 жыл бұрын
Roughly how long can you turn the steam on for without extreme loss on pressure? In the video you steamed - put down - whiped. But the longest it seemed you had the steamer on for was no more than 40 seconds. Is this by choice? Or because it wont work well if you dont stop to let it charge? Thanks for sharing!
@Boodieman724 жыл бұрын
Depends on what steam pressure you have it set to. The reason for stopping and wiping is to remove the dirt before it dried and sticks back on the paint.
@jonescleaningservicellc80764 жыл бұрын
Yoooo thats some good steam and psi, what kind of extractor is it that you're using?
@Boodieman724 жыл бұрын
It's a Vapor Rino 145 steamer with the extractor kit hooked to a wet/dry vac.
@jonescleaningservicellc80764 жыл бұрын
@@Boodieman72 NICE
@MattCookOregon4 жыл бұрын
RIP tree!
@parispj20184 жыл бұрын
How do you compare using this to the optima steamer??
@Boodieman724 жыл бұрын
So much better than the Optima
@parispj20184 жыл бұрын
@@Boodieman72 what version of the optima steamer did you have? And in what ways? Im looking to get into a mobile steam cleaning business other than just cars soley. So im looking for a machine that is versatile! The power doesn't look as strong as the optima, then again could be seeing it different 🤷🏿♂️
@Boodieman724 жыл бұрын
@@parispj2018 DMF version. Never worked right and because it was a diesel powered unit you couldn't use it inside, like a garage. The Vapor Rino is electric and if you add a kit they make you can turn it into a steam / hot water extractor.
@gustorres36264 жыл бұрын
So I have a similar problem like that but it is only that my burner does not kick on and the water light switch turns on. So I'm guessing it's the (tank fill sensor float switch) need to be replaced and for what I hear you need to do is a maintenance to your machine if all the lights turn on.
@Boodieman724 жыл бұрын
The problem was so bad I had to get rid of it.
@JoeJoe-im2ur4 жыл бұрын
Is it the 220 volts?
@Boodieman724 жыл бұрын
No, 120V
@JoeJoe-im2ur4 жыл бұрын
Thanks ! I'm not decided what to buy . 120 or 240. if you have more videos can you share links please
@Boodieman724 жыл бұрын
@@JoeJoe-im2ur 120V is more practical as you can use the machine almost anywhere.
@ThaRedPitbull5 жыл бұрын
What kind of motorcycle is that?
@Boodieman725 жыл бұрын
Honda NC700X DCT
@justgermanpleasexcusemywri36185 жыл бұрын
Nice
@vaporrino5 жыл бұрын
nice video
@Boodieman725 жыл бұрын
Didn't use any chemicals either, and this carpet is 15 years old
@vaporrino5 жыл бұрын
Awesome, I can see the carpet fibers seem revitalized as well. nice
@ajinomoto8315 жыл бұрын
How fast have you gone in it?
@MattCookOregon5 жыл бұрын
lol I need this
@MrRdrgz635 жыл бұрын
You should try it on a different type of carpet.
@MattCookOregon5 жыл бұрын
This is epic
@monk03834 жыл бұрын
That's a good way to put it
@alengubeljic87215 жыл бұрын
I have a problem with my optima steamer. Can somrene help? When i turn the fan on it dont work.. no noice, no lights or anything.. is dead! Any ide??
@herbertsaravia63145 жыл бұрын
Did you find any solution? I have the same problem on mine one! .
@PyeWhite5 жыл бұрын
Hi. Have you manage to find the problems and solution? Mine have the same problems with yours.
@LiquidEntourage5 жыл бұрын
I have a similar problem. First i don't hear the beep when i turn it on. It seems like the boiler doesn't come on like it used to. then it gets going, and then the water and gas light comes on and i lose pressure. I never hear the boiler come back on. I wonder if its a sensor issue. Any ideas?
@Darkvisor5 жыл бұрын
Nice video! 👍
@meticulousdetail51405 жыл бұрын
how’s it on the paint
@Boodieman725 жыл бұрын
I no longer have that unit, it failed several times under warranty. I now have a Vapor Rino unit and it works great on paint as long as you use enough microfiber towels.
@WaywardWaggs5 жыл бұрын
Looks like it worked pretty well.
@Mexijuan5 жыл бұрын
Mate, you sure you can cross that double yellow line?
@MattCookOregon6 жыл бұрын
Saw you on hike oregon comments. Oh man I hope we get some of that snow this year!
@rosie6656 жыл бұрын
is that made by tornador? I've looked at their website and i dont see anything that runs on just electricity.
@celinelife6 жыл бұрын
Bonjour combien de temps avez vous fait avec cette machine ? Je pense en acheter une dans les prochains jours quel conseil donnerai vous a propos de cette machine s'il vous plait ? Cordialement
@hamzasaoudi41013 жыл бұрын
Bonjour À ce que vous pouvez me contacter per email : [email protected]
@starastara52456 жыл бұрын
is the hand tool good to remove stains?
@starastara52456 жыл бұрын
is de hand tool goed om vlekken te verwijderen?
@ReverendGuyWallis6 жыл бұрын
awesome looking videos! just subbed to your channel :)
@APPLEAPPLE-xd9dn6 жыл бұрын
145th subscriber, hi ,its me Apple,i have subscribe your channel and hit the notification bell so that i can watch your videos regularly,i have two channels and need your support,can you pls subscribe back on its my opinion and my beautiful hair ....thanx
@pfernando22626 жыл бұрын
Remove all water and and leave it for 1 day to dry and then fill quoter of the water tank and one the machine and then it will on the water light to fill the water. As soon as it beeps off the right side switch (only) and let the water fill and then ON you will be ok. Optima doesn’t worry about their customers properly. Just to fix this way some people are charging $650 and I was paying the same. This machine doesn’t provide proper troubleshooting guidance and all customers have to pay for their maintenance ppl lots of money.
@Boodieman726 жыл бұрын
I got rid of it a few years ago.
@mimirodriguez65786 жыл бұрын
save riding :)
@ejsgarage6 жыл бұрын
Very nice! That looks fun :)
@Asskicker415826 жыл бұрын
Looks like a shithole!!
@maniaque377 жыл бұрын
he is to tall for the bed lol
@theiconicmr.perfect74997 жыл бұрын
well, at least yours did not explode in your face because you cut the vacuum seal before unrolling it-like I did. I posted the vid of the catastrophe last night if you would like to check it out.
@Boodieman727 жыл бұрын
That's because I watched youtube videos first, lol
@theiconicmr.perfect74997 жыл бұрын
So did I! I actually watched yours as well as several others, but in the heat of the moment, I guess I forgot the script and… BOOM! Good thing I never joined the military.:p
@excel8297 жыл бұрын
Fat Boy, bend over a little more!
@Reenomeano7 жыл бұрын
very pretty though
@victorlule94617 жыл бұрын
my machine has the same problem, I did pull the sensors and clean them with a sand paper as the manual say , but still doing the same sound, but I notice that first when I started works then star loosing pressure and the sound comes again, you said you put the sensors in some kind of liquid or something, can you tell me what was it, thanks
@Boodieman727 жыл бұрын
I put them in CLR. Don't worry about it because it didn't work and had to be sent back to Optima for repair.
@victorlule94617 жыл бұрын
ok thanks , can you please tell me how much did you pay for the service
@Boodieman727 жыл бұрын
Victor Lule It was covered under warranty.
@householditems16245 жыл бұрын
@@Boodieman72 what did they say was the problem
@G80Julian8 жыл бұрын
The next famous motovlogger
@TheMissendenFlyer8 жыл бұрын
Lovin' the Music Boodieman72! Nice ride :0)
@tripletorque66088 жыл бұрын
I really want to get a drone, they look awesome. Did you look at any other models other than the Phantom 4?
@Boodieman728 жыл бұрын
+TripleTorque Only the other DJI Phantoms
@massachusettsprepper8 жыл бұрын
Looks like a good test flight of the DJI Phantom 4. I fly a Yuneec Q500 4K but I'm waiting on my Typhoon H. I will be looking forward to some more flights from your channel and your thoughts on the Phantom 4. And I'm a new subscriber to your channel.