I'm about to install the HMOR Softopper bed rails with my softopper<duh😅> on my 2nd gen Tacoma. Dont plan on putting a RTT. Maybe a platform to haul some misc things. Would i jeed these?
@heavymetaloff-road16 күн бұрын
@@emileonidezbringas9923 It's not just load that causes issues, it's taking it off-road. The twisting of the body and frame can cause that even with light load. It is still recommended to put it on
@metal1999Ай бұрын
What a Mess
@juanantonio77382 ай бұрын
Actually, I removed all the a/c and heater components from my 92 f150 5.0 🤷🏻♂️
@jviney813 ай бұрын
New build gonna be bad ass!!!!
@pizzle44203 ай бұрын
wheres the guns \
@GNolan20054 ай бұрын
Who is the manufacturer of those parts.
@heavymetaloff-road4 ай бұрын
Heavy Metal Off-Road
@kenpak60144 ай бұрын
This is the ideal setup for transporting my Thule XT cargo basket, Hobie kayak, Porta-Bote OR rooftop tent (RTT) on my 2021 Honda Ridgeline equipped with either a Softopper or OEM Tonneau cover!
@MATRIXS845 ай бұрын
Look like installed backwards
@heavymetaloff-road4 ай бұрын
You can install it either way. For the newer decked systems, mounting the other way works best
@Vultite6 ай бұрын
Do you need stiffners if you just use the bed for hauling?
@heavymetaloff-road6 ай бұрын
The bed stiffeners really help with off-roading and or putting weight on the bedsides with a bed rack or other equipment. If you are hauling, they're really nice to have them in there when you want to tie stuff down or support the bed when you are using the t slot rails.
@JoeK03226 ай бұрын
How long is that 7/16 bolt? I feel like a lot of companies reuse that d ring bolt.
@scottpolkow84976 ай бұрын
Does this Rack come with all the brackets and hardware shown in the video? I have a Tri-fold BakFlip Tonneau cover and want to do the same thing. From what I see the Mopar cover mounts the same way as the BakFlip.
@heavymetaloff-road6 ай бұрын
They will be available on the website now that you mentioned it!
@aydenmccall89279 ай бұрын
Did you have to remove and fuses or relays for this to work? Tried this on my 1994 f-150 and it wont turn over
@evilchild36849 ай бұрын
What is the number to that color u applied i have steel bumper need touch up for it
@Smeltervillain42011 ай бұрын
Isn’t it illegal to drive through creeks up there and off designated roads..???
@heavymetaloff-road11 ай бұрын
This is a designated trail through USFS and BLM
@cdublxi Жыл бұрын
Will the 21” be high enough for my 85” long RTT to be able to clear the fin antenna? Do you offer this in a 23” or something taller than the 21”? My 2014 has the 5’ bed so it would hang off too much in the rear with a shorter rack
@heavymetaloff-road Жыл бұрын
If you have the shark fin, we do offer a more custom 23-in set. You can call or email to order, since it's not on the website. We would be happy to take care of you
@rayss3323 Жыл бұрын
Cool trail. Im about 2 hours south of CDL and would like to run that. Where did you pick up the trail? Great vid!
@scottcarnduff2897 Жыл бұрын
Did you do an EGR delete on your motor?
@ChuckHolt Жыл бұрын
Hey our channel is planning a trip over to Wallace soon, we have ran Denver creek, are there any other trails in the area you would recommend checking out?
@heavymetaloff-road Жыл бұрын
Compressor and roller coaster. You can reach out by calling us or emailing to discuss further.
@wapiti128 Жыл бұрын
What was your tire pressure for that ride? I might go do this tomorrow!
@heavymetaloff-road Жыл бұрын
I believe I was running about 12 PSI. But that's a lot of pressure for these bigger tires. If I wanted a cushy ride I would have brought them down to eight
@wapiti128 Жыл бұрын
@@heavymetaloff-road Roger. Thanks! Are those 33"?
@georgeg1126 Жыл бұрын
I just purchased a used '20 Pro and previous owner had installed bed stiffners and bunch of cool mods. I wish I can thank him personally
@rickydurfee1643 Жыл бұрын
As a local, stay the fuck on the trail
@heavymetaloff-road Жыл бұрын
It's this a general statement? Everything shown is on the trail and legit.
@rickydurfee1643 Жыл бұрын
@@heavymetaloff-road at 3:00 your at the bottom of 1901 quarts creek. Crossing threw the ditch witch isn’t a trail. I see you guys are from OR. Idk how you guys do it down that way. But we already have to deal with closed gates to public land because people tear stuff up that shouldn’t be. Every day more gates get out up an locked .
@meric-bo-olson211510 ай бұрын
Even the off road guys are trying to kill each other?! Calm down, Let’s get out there together. Peace out.🏁
@TheOriginalADGuy9 ай бұрын
First thing that came to my mind as well. I appreciate you coming up here and enjoying the area, but come on man...
@taylorwelsh149 Жыл бұрын
Been wanting to get up there . Grew up in the owyhees of Idaho. Lots of cool rock trails but I want something in the mountains. That's what we lack
@wapiti128 Жыл бұрын
Did you go up there yet? Are you in the Silver Valley? I'm thinking about going up there this weekend or next.
@dirttdude Жыл бұрын
yep, its always a good idea to pack a hootenanny, one day you might have to stovepipe your sister with a broken truck antler and wind up on your lid in the rhubarb patch, its funny now but after you pick rhubarb out of your sisters gizmo for two weeks it's less funny
@johnmadsen37 Жыл бұрын
Rockshocks are my favorite.
@purebloodedpatriot9352 Жыл бұрын
Installing an SPOD would have enabled the lights to be dimmable. Makes any “off road only” lights street legal.
@michaelarchangelthehammer Жыл бұрын
Cdl...love it
@erikarunolfson Жыл бұрын
Awesome Tim!
@somebodyandthem Жыл бұрын
Nice rack
@joeparga1070 Жыл бұрын
What month was this
@heavymetaloff-road Жыл бұрын
May
@shinymud7 Жыл бұрын
It’s easier to drag a log downhill than uphill
@timmuniz_ Жыл бұрын
Nice work!
@gray_citizen Жыл бұрын
Are those side plates large enough to mount maxtrax?
@heavymetaloff-road Жыл бұрын
Yes they are
@watsonsynthetics Жыл бұрын
Very cool. How can I help?
@heavymetaloff-road Жыл бұрын
Been looking at a lube sponsorship 😀
@lore_shards Жыл бұрын
Looking Good Tim!
@heavymetaloff-road Жыл бұрын
Thanks 👍
@bradefulle7732 Жыл бұрын
Oh my god
@bradefulle7732 Жыл бұрын
Oh tim
@kjita_350z3 Жыл бұрын
What tires size are those
@heavymetaloff-road Жыл бұрын
275/70/r17
@hangrymachinist2 жыл бұрын
Needs more cow bell 🤣
@mountainadventures73462 жыл бұрын
Nice rescue Tim! We were Elk hunting just north of you last October! That’s cool country over there.
@heavymetaloff-road2 жыл бұрын
Yeah it's absolutely beautiful! Maybe we can meet up there sometime This year
@mountainadventures73462 жыл бұрын
@@heavymetaloff-road That would be fun! Im cutting out the Newport property now. Ive got some cool rock features we need to check out too!
@nicklewis86052 жыл бұрын
How do you think this effects the strength of the body mount?
@heavymetaloff-road2 жыл бұрын
It increases the overall strength, due to thicker than oem steel and proper welding technique, while increasing the wheel clearance.
@DravonHenson2 жыл бұрын
I finally found a video of someone ACTUALLY explaining/demonstrating this. Thank you.
@heavymetaloff-road2 жыл бұрын
Please share this to others so they know!
@crimsoncruiser61222 жыл бұрын
Where did you get the grille on the white one looks fucking awesome 👌
@heavymetaloff-road2 жыл бұрын
Thanks, it's hand made actually. A one-off
@killahboutdooradventures2 жыл бұрын
Cool! Should of taken red cloud creek going down just below the graphiti mine ruins
@heavymetaloff-road Жыл бұрын
I did end up checking that out more recently, and it's a nice steep little area
@kinanromman51972 жыл бұрын
Love Toyota but man, they should do a better job on bed frame rigidity. Also why is that frame so narrow?
@heavymetaloff-road2 жыл бұрын
Good question. Hopefully they will address that in a future generation
@jaredcovington39302 жыл бұрын
Are these the powder coated? Also, when buying two, I did not see the option for getting the welds for plates on both sides. How can I make sure I get both?
@heavymetaloff-road2 жыл бұрын
You can definitely get these ordered with powder coating from us. If you want plates on both sides, give us a call or email [email protected] and we'll set you up with a more customized set
@jaredcovington39302 жыл бұрын
@@heavymetaloff-road I'll be calling next week, thank you!!!
@dman33492 жыл бұрын
Which plasma cutter and welder did you use?
@heavymetaloff-road2 жыл бұрын
Miller 220 welder and thermal dynamics cutter
@TurboNorm2 жыл бұрын
You didn’t provide a link where a viewer could get that product. A Google search still has me scratching my head. ?
@heavymetaloff-road2 жыл бұрын
Link is in the video description as well heavymetaloff-road.com/powder-coat-touch-up-paint-black-color-match-heavy-metal-off-road.html
@TurboNorm2 жыл бұрын
Thanks for the link. Still don’t see it in the description though.