Tapped Out Cycles

Пікірлер

@kan87ful 3 сағат бұрын

Can we install on street 750 pls advise

@victormanuelmendezopazo7576 3 ай бұрын

TODO ESTO SIRVE PARA UNA HARLEY STRET XG 750- 2019 SOY DE CHILE

@tappedoutcycles2757 3 ай бұрын

@@victormanuelmendezopazo7576 nada. Todo XL injection de petrol

@Steve-fe8gj 3 ай бұрын

Thanks for the video review……I’ll pull the trigger on getting these for sure. Worth the price for American made.

@thecustomer-gt6er 3 ай бұрын

How long did it take to fit?

@tappedoutcycles2757 3 ай бұрын

Maybe 2 to 3 hours

@jacobkinter4106 4 ай бұрын

How much does install cost?

@tappedoutcycles2757 4 ай бұрын

It takes about 2.5 hours so for us it's $139 x 2.5

@mr.b3168 4 ай бұрын

Quite a lot of work for a fuel gauge

@Eak12345 5 ай бұрын

I´m on my way to buy a 2004 1200 sportster and I´m already looking at upgrades hehe. Does this also work on the 2004 model?

@tappedoutcycles2757 5 ай бұрын

Congrats. This works on the fuel injection models only.

@Touro87 5 ай бұрын

Hi.. Great video and super detailed. Please send me the link of the led digital gauge you installed. very nice and not in the way gauge hahaha. hope you reply

@javierc2726 6 ай бұрын

This is terrible filmed

@tappedoutcycles2757 6 ай бұрын

Thank you. Since you have so much time on your hands, why not offer some help on editing or something constructive?

@agustajensen9114 6 ай бұрын

Could the gauge be used on an 06 carburetor model?

@Shaashvatbhatt 6 ай бұрын

Does this fit street bob 2014 dyna

@doctord1296 6 ай бұрын

As far as I know, it's only for the FI XL models

@claudenewton8932 6 ай бұрын

Can these be worn inside or outside motorcycle pants. Just got my right knee replacement done next will be the left knee. After all of that I will need to get some good braces. Price does not matter at this point.

@doctord1296 6 ай бұрын

Yes, and they're very comfortable! I use them to snowboard and all.

@jimrobert7207 7 ай бұрын

No torque wrench after telling us how important that you do not over tighten. I know you boys are experienced mechanics but as a tutorial you could do it correctly.

@doctord1296 7 ай бұрын

You're correct

@jameswilliams803 7 ай бұрын

Would this work on an 01 sportster 883 custom

@alexmaccity 7 ай бұрын

Nah, nah, nah, nah, nah, nah, nah.

@RyanCarney-u5m 8 ай бұрын

Boys should I try this or just let my guy do it? I bet I can get it close but I don’t wanna go sideways down here he road lol

@HarmonicFoul 8 ай бұрын

I know this is old but was there fuel in the tank when I removed the lines of so does it leak or not to worry?

@HamsterNeedWorld 8 ай бұрын

Hello sir its its 100% fully synthetic oil are u sure

@colinmcblain 8 ай бұрын

1:21 great video but my kit supplied by Harley did not come with the jumper leads to connect to the diagnostics plug. I only have the orange wire to connect but have no idea where too

@tappedoutcycles2757 8 ай бұрын

It's been a long time since I've done this kit but I believe the orange wire goes to anything that is 12 V switched hot. Meaning once you turn the key on whatever power source you usw should be 12vdc

@daztippett4001 9 ай бұрын

I have fitted this followed your video, on a 2017 iron 883, but I have the fuel light staying on now , is there something I have forgot, thanks

@tappedoutcycles2757 9 ай бұрын

Possibly the floating sensor is rubbing on the pump housing and not allowing it to register. You could try shaking the bike aggressively to see if it frees up. Otherwise, remove assembly and inspect. This is provided all electrical connections are proper. Inspect that first.

@daztippett4001 9 ай бұрын

@tappedoutcycles2757 when you mean the floating sensor Is that the part that has replaced the low fuel light float Thanks

@MrGhalemin 10 ай бұрын

Yes brother it’s good information to me also cause my 2017 super low have no show fuel lower indication so it’s helpful to me.

@tappedoutcycles2757 9 ай бұрын

Happy it helped out

@scas1239 10 ай бұрын

I have an 2004 Sportster custom with no fuel and I am obsessed with with Fuel gauge.. only issue is that it will not fit my bikes master cylinder. If I get a new master cylinder for a more recent bike would it fit? Or what else would I have to buy? Thanks so much! Great video!

@tappedoutcycles2757 10 ай бұрын

It'll only work on Fuel Injected models

@dirtyal6567 10 ай бұрын

Thats a 10/10 instructional video thanks mate.

@tappedoutcycles2757 10 ай бұрын

So glad you found it useful!

@willisluckey4328 10 ай бұрын

Great video 👍thanks for your great lighting and information and for not playing loud music...keep up the great work 👍 you have the best how to work on your Harley videos that I have ever seen...👍👍👍💯💯💯⚡⚡⚡🇺🇲🇺🇲🇺🇲🏁🏁🏁

@tappedoutcycles2757 10 ай бұрын

Thank you so very much for the kind words and I'm glad you found it so helpful. We would definitely make more video if we could find a way to monetize things or money wasn't an issue. The problem for us is that it takes so much time and we're limited on that.

@MA-nu7ki 11 ай бұрын

big job. great video

@tappedoutcycles2757 11 ай бұрын

Thanks for watching

@jerichostevens2711 Жыл бұрын

the seat locks that way because the momentum of the bike is going to push your body backwards... keeping the seat locked in... if it was the other way around... you'd end up with your seat coming off the post.

@efrenalamea5744 Жыл бұрын

it work on a 2017 iron 883?

@tappedoutcycles2757 Жыл бұрын

Yes it does. Any fuel injected

@101gitfit Жыл бұрын

Hey I know this video is 3 years old, but I found it extremely helpful. I have a 2017 HD 1200T Sportster Superlow that does not have a fuel gauge. I went to my first motorcycle rally in Puerto Penasco Mexico this past weekend and had to keep a very close eye on my mileage by using my trip meter. I think having a fuel gauge might have lessened my anxieties about running out of gas and being a burden on the folks I was riding with. The way you explained everything step by step, makes me think I could do this repair to my bike….maybe 😊

@tappedoutcycles2757 Жыл бұрын

You can for sure. Thanks for watching

@ebolawarrior451 Жыл бұрын

I’m gonna not watch the whole video and put the oil in the stator side 😂

@LeandroSilva-im3qv Жыл бұрын

I have a 2006 883 custom, is It the same install? Same parts and connections? Or because it's a carburated model It has diferences? Thanks

@tappedoutcycles2757 Жыл бұрын

This is for FI bikes only so it will not work on yours

@fishypictures Жыл бұрын

Tip, just twist the tail off the zip tie with lineman’s pliers. Smooth finish.

@TheEfrainvega Жыл бұрын

Donde se consigue 😮

@TheEfrainvega Жыл бұрын

Para una 1200 año 2005

@NickW90 Жыл бұрын

With your bigger right knee are you wearing medium on both legs? The lower strap looks like theres not a ton of strap for guys with bigger calves

@tappedoutcycles2757 Жыл бұрын

I wear medium on both and for me, there was plenty of adjustment. The width of the knee is the limiting factor for the brace as it'll start putting acute pressure on the sides

@CJCFCO Жыл бұрын

Don’t Buy if you’re going on an adventure ride!! It’ll leave you stranded

@CJCFCO Жыл бұрын

Great hot too though

@orgillmathew Жыл бұрын

I recon it’s a waste of money,and takes away the personal bond a man has with his pride and joy lol but all I do is just reset my (A) odometer when I fill up I usually get an average 150 klms until the fuel light comes on but even if “forget” which I haven’t I know I got about 90mins of riding before the light comes on. I use (B) odometer for my oil changes. But a cool project

@cah7925 Жыл бұрын

Nice and clear explanation👌 Which Engine Oil you recommend for KTM Duke 390 apart from Motorex bcoz it isn't available in our country and which one you pick Amsoil Metric 15w50, Motul 300V or 7100 or Putoline Ester Tech 15w50....Thanks😊

@johnpatricionarvaezabad2933 Жыл бұрын

Alguien me puede ayudar con el link de dónde lo puedo comprar para una sporter por favor

@mikevars8979 Жыл бұрын

I can't find the plug where the gauge harness plugs into. 🤔

@marloncornejo2469 Жыл бұрын

Hi. I have a question. Where can I buy the fuel gauge?

@sovietred7371 Жыл бұрын

Quick question, I'm not a big fan of the digital display, I like gauges more, could one wire it to a gauge instead of the display or will that not work?

@tappedoutcycles2757 Жыл бұрын

So long as the voltage input calibration was correct, it should work

@kuancahshengeric9806 Жыл бұрын

What is the nut size

@Scott64T Жыл бұрын

I know this is an older video, but I really need to do this. I can't find a link to the gauge kit and the site is Temporarily Closed. Can anyone help me out?

@sovietred7371 Жыл бұрын

Harley Davidson has them on their website

@douglasradowick508 Жыл бұрын

Nice job on the install and explaination of the making it happen. I'm looking at an 883, or, a 1200 Sportster. Definitely want a fuel gauge on the bike! Doug🏍️👍

@tappedoutcycles2757 Жыл бұрын

Glad you found it useful. Would love to make more but it's just too time consuming without a way to monetize them.

@ADViators Жыл бұрын

I've watched this video quite a few times to setup my installed gap. The instructions from Rekluse aren't that clear. After fully collapsing the clutch cable adjuster and 3-4 threads on the lower in-line cable adjuster I'm supposed to "Using a T30 Torx, loosen the clamping bolt on the throwout arm. Rotate and the shaft counter-clockwise with a flat screwdriver while turning the arm clockwise. Tighten the clamping bolt with the arm and shaft in this position." However, after doing this the clutch is basically fully engaged where in your video the arm still has movement, mine does not... Realize this was three years ago, any tips? 😊