Hey guys should the bearing spin freely on the sturt top? I have hard time getting the spring back on so that the top plate goes straight

Can the handle be remove or cannot ?

Excellent! Thanks for this.

This was a HUGE help for me, you're a champ mate!

I bought one for £23 for the hell of it and it's fine to be honest. I love it!

Great review. It just arrived. First problem ; I want to replace the 3-pin cable with a 5-pin cable ( for a stereo mic ) and cannot work out how to open the handle. Any ideas ?

Did you have to use any silicone?

The power cut was finny. 😂 Im about to purchase this one for my recordings. Great test!!!

Thanks John, I’ve seen another video for this boiler where they just changed the pcb board itself. Are there two different types of board, one with the grey unit you replaced and another with a circuit board…?

This has to be the most wholesome father son vlog I’ve ever seen.

Can someone bless me with this adapter I got an FD lense and am using a Nikon camera but, it does not have a lense I would appreciate your help.. Thank you

My Suprima 60L was a bit different. It fired up but went out after about 1 minute with the water pipe barely luke warm. It then fired up 5 or so minutes later and went out again. This would repeat over and over with the rads only just Luke warm. First thing replaced was the temperature sensor which made no difference. Then the PCB, problem solved.

Are you sat on the roof of a church in Elwick place TN23?

Why is the image backwards

Great video for those wanting to do it themselves, especially when you can't get a plumber anywhere in the world at the moment.

Works ok, got any videos on how to walk though a wall on CS6??

Hi. A very good review. Accurate and insightful. I just ordered :) Thank you 👋

Very useful video. It is one of those "Easy when you know how" situations. My boiler is working but since we have been hibernating it has been switching off two or three times a day. I can always restart it but its a pain. I am tempted to follow your lead but It is 30 years old so probably time for a replacement.

03:23 that black cable on the bottom left mate, it doesn't seem to want to come out on mine, i feel like i'm going to rip it, any suggestion??

“As you can see I’m a bit cack-handed with my fingers.” Yes. We can see.

Why are you encouraging people to meddle with their boiler without the slightest hint of any diagnosis?!

Great video, but these instructions are incomplete. How do you apply silicone grease on the push-pin? Where does the tiny o-ring go on the pin?

you are an inspiration to people like me who want to create a film like this

Wow! 10 years ago.. feels like yesterday!

Thanks John! I Like your Review! From Buenos Aires Argentina! Here un Argentina the Rode are very expensive, and this is a quarter of the price! Boya $19.000 pesos Argentinos Vs Rode $87.000 pesos . Thanks! I suscribe. See you

Hi john, I have a potterton promax sl12 with 2 solid green light and 1 flashing red can you advise on it mate cheers

Lovely music

⭐Great⭐ Ashford Market Boot Fair Official Orbital Park, Monument Way, Willesborough, Ashford Kent. TN24 0HB

Great! 👍💯 he is very creative 💚😍😊🤗

There's no better place to be in the summer than a Cambridge park.

Rubbish Music lmao brilliant, you got my sub John

This is an historical treasure. Thanks Johnn.

Hi ya thanks for the video just a quick one is this the same for a newer ka like a w reg cuz the knocking sound on the fronts r getting worse.

how did u record your computer screen?

Hello my mot says that it’s the suspension mount. Does that mean it’s the mount as seen in the video?

Know exactly which blimp to buy now. Cheers.

Thanks! Just what I wanted to know.

I take it you tested the FSD, burner pressure and Flue gas anylser after replacing the PCB as per Gas Safe regulations? Signed it off safe with your gas safe registration number too......

Favourite part was the power outage. Thanks for this!

Do more videos! Great review

This is exactly what I needed. Thank you

Great video! I just changed the PCB on a Potterton Suprima 40L and this was very helpful! Thanks

I know the boiler documents don't mention the o ring or show it on any diagrams. Pretty poor show really. The instructional videos on youtube by others are much more helpful. Thats how I found out about it.

Fairly often a flashing red light means a board fault on these. But quite a few times its not. Don't just change the pcb because it's flashing red.

Had the same problem 11 years ago! Often it's not the components but dry joint issues with these. Resoldered all the joints...been going smoothly ever since. These boards are made in China using cold soldering which don't last for long.. Potterton knows about this but won't fix the issue for obvious reasons ! As it means collecting £250 a pop.

Good vid 👍

Good test and it’s very good value. I recently purchased the Rode blimp and it’s an updated version that addresses some of the issues you’ve mentioned, cable management and movement of the handle etc. It also has the Rycote lyre suspension that I prefer. Having said that t was twice the price but overall though the Boya looks really good 👍

Great review! Cheers for that!

Excellent video chaps, very informative...

Twice! After a leak Dec 2017, I replaced the Diaphragm and now it's gone again but with loss of hot water this time but no leak. What is it with the design? However, looking at the records the Boiler Main HE24 appears to be installed 2004 so the original lasted around eleven years? Can someone please explain?