The Mo You Know

Пікірлер

@greggrondale5741 16 сағат бұрын

Plugs are like tennis shoes - if one is worn down, its time to replace the others. Thanks for tutorial

@namewitheld 18 күн бұрын

Absolute GARBAGE. Mine and multiple other reviews of this bricking after one or two uses. It's such a piece of shit that it's not available anymore.

@themoyouknoww 17 күн бұрын

@@namewitheld yeah, mine still works, but it's crap.

@GaryDunn-k5u 25 күн бұрын

Useless video

@emmanuelperez662 2 ай бұрын

what code came on making you replace this ?

@themoyouknoww 2 ай бұрын

@@emmanuelperez662 no code. It was leaking oil, so I thought I'd replace it.

@raybrock6340 3 ай бұрын

Horrible sound quality couldn't even launch the video had to turn it off

@christopherrumler2654 5 ай бұрын

speakers on max and cant hear shit

@andyjuman4229 5 ай бұрын

Is it GL4 or GL5?

@MattWhite-e8n 4 ай бұрын

I believe the valvoline full synthetic is GL-5, which is not what you want in this transmission. Maintenance manual specifies GL-4 only. The valvoline says it meets GL-4 in non-synchronous transmissions, but the Xterra has synchros. OP should probably swap this out with something like Redline MT-90.

@anthonykruger3287 5 ай бұрын

Just got a 2003 MR2 spider and I’m trying to do preventive maintenance and all these videos are very helpful. There’s not a lot of videos on these cars. Thank you very much

@themoyouknoww 5 ай бұрын

@@anthonykruger3287 glad to help. Congrats on the purchase!

@HeGotFlour 5 ай бұрын

Did you disconnect the battery during this procedure?

@themoyouknoww 5 ай бұрын

@@HeGotFlour nope, but it's easy enough to do so.

@finnafishfl 5 ай бұрын

Thanks, I needed this video. Speak louder and make a few cuts just some constructive criticism

@themoyouknoww 5 ай бұрын

@@finnafishfl I appreciate it. My mic died, but I had to get the video done.

@finnafishfl 5 ай бұрын

@@themoyouknoww just used the info I got here at the junk yard. Only managed one fog light out of like 9 cars 🤣

@themoyouknoww 5 ай бұрын

@@finnafishfl damn. Amazon would have been so much easier.

@finnafishfl 5 ай бұрын

@@themoyouknowwmuch more expensive too 🤣 I needed fog light, the stock and the whole setup for the inverter so I got it while I was there. Got the bulb at walmart

@vulturetribe6866 5 ай бұрын

anyone need wooden design trd shift knob can check our video

@missayawk 6 ай бұрын

Thanks for not using it on a 2023/2024 car thats just been waxed. Using it on an older model dusty/ lightly dirty car shows the true effectiveness of the product. I just finished a bottle and plan to get more

@themoyouknoww 6 ай бұрын

@@missayawk glad to help!

@SBdunks3 6 ай бұрын

When you took the fuel rail out I noticed some kind of filter in the middle of the rail, what is that?

@themoyouknoww 6 ай бұрын

@@SBdunks3 there isn't a filter on the rail. Probably something else.

@SBdunks3 6 ай бұрын

@@themoyouknoww I read that it’s a fuel pressure regulator, my aftermarket fuel rail doesn’t have one so I’m worried if it’s absolutely necessary

@themoyouknoww 6 ай бұрын

@@SBdunks3 you should be fine. The regulator is within the fuel pump assembly in the tank.

@cameronm2203 7 ай бұрын

volume sucks

@mr2bmw 7 ай бұрын

Original one is much nicer!

@themoyouknoww 7 ай бұрын

I like the trd. Different shifts for different folks.

@frankiesmith8331 7 ай бұрын

You're definitely creating many swirls and minir scratches with the first passses of the rag. You're smearing the dirt in instead of picking it up :(

@EduardoMartinez-d4o 7 ай бұрын

Bro you need a 5 gallon bucket to do 2 coats

@themoyouknoww 7 ай бұрын

Yeah, I used like 3. Terrible product though.

@kennethrenock6588 7 ай бұрын

Clearly on how not to paint your floor for the first time in your life... Bro had no idea what he was doing😂.. a C for effort😊

@themoyouknoww 7 ай бұрын

I'll take it! I give you the same for grammar.

@raad3731 7 ай бұрын

and the second brush is completely damaged and has to be replaced. As a result of all that, the wheel is not clean at all. FYI, all wheels below will collect the dirt from the wheel you're cleaning.

@raad3731 7 ай бұрын

the wrong brush was used for the rim from the inside. you need to use a bigger brush. the small detailing rush is for small areas.

@raad3731 7 ай бұрын

you need to spry more and cover the surface not spreading it with the brush.

@Dolby109 7 ай бұрын

Thanks for the video...I do wish it showed a bit more of the pump disassembly (BTW worst fuel filter design I have ever seen by far), but it seems like the hard part is just the fuel lines.

@elliott4095 8 ай бұрын

Did you figure out a way to raise the leather boot?

@themoyouknoww 8 ай бұрын

You could probably put something underneath the collar of where the boot sits, but I didn't as it looks fine.

@pavelslama5543 8 ай бұрын

Man, I thought that French cars will be difficult to maintain and Japanese (especially Toyota) will be easy. But after owning a Peugeot 307 and this Toyota, I can safely say that I´d give whatever if my Toyota was as easy to maintain as that Peugeot. For example this. Remove fuel rail. Something simple and foolproof on the 307. Here? The fuel pipe is 2cm shorter than it should be, the wiring harness behind the injectors is at least 2cm shorter than it should be, and even if you manage to get through that and install new injectors, the rail still keeps leaking above the 3rd injector...

@themoyouknoww 8 ай бұрын

Imagine working on a boxster...

@aznycts 8 ай бұрын

Never Roll with one Arm . 😆 did you hear the Noise ? Sorry Bad Job. 😥

@themoyouknoww 8 ай бұрын

Just sharing my experience in my free time. Think about that before you trash people you don't know.

@James_m7 8 ай бұрын

This scanner is over a decade old, are there any good new scanners that you can recommend?

@themoyouknoww 8 ай бұрын

Haven't had much experience with anything newer, but I know a lot of my friends like the Carly one.

@richardmichael59 7 ай бұрын

The software is current and upgraded for free online. Really no need to buy a “new design” when the guts are what matter.

@sowolelekandaniel9121 8 ай бұрын

Hello plz I need your help

@kendrickdietsch9052 9 ай бұрын

Is weighted? Or lightweight?

@themoyouknoww 9 ай бұрын

It's lighter weight and a bit smaller.

@stephensmith6790 9 ай бұрын

Thanks for not showing how the foam is supposed to work

@themoyouknoww 9 ай бұрын

You just spin the nozzle to the foam setting.