I’m wondering the same thing. We buy ham bones for our dogs at the store so what’s the difference?
@DennisNardone-nu7sp10 ай бұрын
Mr. Atkinson was a wonderful teacher. He served his students and gave his full attention to their development. My roots as a drummer were first established through his leadership. He helped me read a drum part and was vital in my development. Even though I left and moved on his help was truly most appreciated later in my life after I grew up and realized his gift to me. I passed his love of teaching to my students in elementary education. These were special moments in my life which will never be forgotten. I thank his family for their care in those years I spent at Middlesex. The roots go deep and the appreciation for years passed are imprinted on my heart. Rest in peace Mr. A.
@kevlyth1712 Жыл бұрын
Not cooked they aren’t good. Raw is fine
@thevics123 Жыл бұрын
Invest in a gas mask with a particle filter.
@marisanchez3235 Жыл бұрын
Yo tengo un galgo no es afgano, pero también llora asín cuando kiere algo oh cuando se queda solo lo se porke lo oigo por la ventana abierta cuando regreso a mi casa y cuando ve que llego ya se calla y se vuelve loquito de alegría al verme🤗😃
@bugzemo Жыл бұрын
I want to say, It seems all "Hound Dogs" howl, or whine like that (Quiero decir, parece que todos los "Hound Dogs" aúllan o gimen así).
@billneurohr8509 Жыл бұрын
Hope the orig converter can be reused.
@billneurohr8509 Жыл бұрын
Roadsalt.
@rockyorrock1432 жыл бұрын
I’m 1 year late but ham bones aren’t the best for dogs since they can splinter in dogs stomachs and cause them pain
@bugzemo2 жыл бұрын
The new video is on on this page (Again "Merry Christmas Everyone"..!! Also refer to my original "Smoked Turkey Video" during COVID : kzbin.info/www/bejne/jajThayijcihndE
@bugzemo2 жыл бұрын
Again "Merry Christmas Everyone"..!! Also refer to my original "Smoked Turkey Video" during COVID : kzbin.info/www/bejne/jajThayijcihndE
@bugzemo2 жыл бұрын
Just uploaded a new version for 2021. Yes we are still in COVID The Video will be posted here & on Facebook. "Merry Christmas 2021 Everyone..!!" (kzbin.info/www/bejne/jajThayijcihndE)
@blue68chevelle3 жыл бұрын
I like the c clamp and board trick to keep the blade from spinning while tightening. And on the negative comments, people expect big budget video quality on a dime store budget, then there’s the ones who think you should only cater to their specific issue they are wanting to solve. Keep making videos, learn as you go. The quality will improve as you keep helping others with tips.
@bugzemo3 жыл бұрын
1st time in a while I've "revisited" this and I'm glad to see there are some more recent videos. Here are some of the links from 2017 & 2018: kzbin.info/www/bejne/pnuvmZiMjKtoi5o & kzbin.info/www/bejne/q6bbqIJtaJ52oqc
@josephcroft42683 жыл бұрын
what a drawn out video it was 5 mins before we saw a cut , as a guy said it can be cut with a craft knife
@bugzemo3 жыл бұрын
Right Joe, keep in mind this video is several years old. When I was looking for information on getting surfaces to paint on I couldn't find any so I did this (cut the boards) for my better half at the time, (she has since passed away). I now see there are several videos out there and I guess using a utility knife would work. Additionally here are the two video that are really good with links from 2017 & 2018: kzbin.info/www/bejne/pnuvmZiMjKtoi5o & kzbin.info/www/bejne/q6bbqIJtaJ52oqc
@farheenscookingpassion77024 жыл бұрын
Thanks for this nice video dear👍🥰❤️
@bugzemo4 жыл бұрын
No problem, you are welcome... I have 2 more cooking videos that I'm uploading. Let me know what you think
@farheenscookingpassion77024 жыл бұрын
Sure dear you also let me know about my recipe keep it up 😊 best of luck ❤️ join you
@dennisnardone83425 жыл бұрын
Mr. A - Mr. Atkinson was and will always be one of the most important persons in my life. Years later did I realize this and I am sure he has filled that role for many other students. I have been blessed knowing him and his memory will live on with the many students he taught. I have visited the college and went looking for the little band building that we rehearsed in but unfortunately the building was removed. Well, memories can not be removed and am grateful for them. Enjoy the music and many thanks Mr. A ---
@nancyellison97625 жыл бұрын
Milton - It is so great to hear this and see these images. Would you believe I joined a community choir in Hillsborough 2 years ago and Martha Dudich (our accompaniest at EHS at that time) is the director! It's a small world and thanks to Mr. Hughes legacy I am enjoying singing now more than ever. Thank you for posting this. :) Nancy Ellison (formerly Messina)
@BeachsideHank5 жыл бұрын
Hardboard can also be scored and snapped using a simple utility knife, just score both faces and snap off, works surprisingly well, and no sawdust either.
@bugzemo5 жыл бұрын
Right, thanks for your comment
@frankventimiglia64315 жыл бұрын
Horrible video. No explanation of what you are doing..how..or why. No mention of what blade you are using. Useless.
@bugzemo5 жыл бұрын
Frank, no need for a negative comment, (I was just trying to help or provide information) but, this is the same reply that I gave to others... I didn't get a chance to really follow up on the type of blade other than to see that it was not a diamond cut blade. I believe it was just a general purpose wood blade (since the Masonite board is just compressed board). Also if you did not notice, while changing the blade, I actually had a wide blade on the saw for ripping or cutting railroad ties (at 1:45 min. into the video). You will also notice, sitting in the box, the blade I switched to had smaller teeth and again , I believe it was just a general purpose wood blade.
@dougmael5 жыл бұрын
I was part of that great corps (baritone horn player) as was my wife (color guard). This was at the “Dream” show, and Skyliners took a major screwing that night!
@abeljimenez5946 жыл бұрын
it would help alot if you show the kind of blade
@bugzemo5 жыл бұрын
Same replay that I gave to others... I didn't get a chance to really follow up on the type of blade other than to see that it was not a diamond cut blade. I believe it was just a general purpose wood blade (since the Masonite board is just compressed board). Also if you did not notice, while changing the blade, I actually had a wide blade on the saw for ripping or cutting railroad ties (at 1:45 min. into the video). You will also notice, sitting in the box, the blade I switched to had smaller teeth and again I:believe it was just a general purpose wood blade.
@bugzemo7 жыл бұрын
This device had to be replaced nothing I could do about it
@Jonathan-zo2kp7 жыл бұрын
there is no way to fix it?
@bugzemo7 жыл бұрын
Jonathan Mvst as I stated on the public comment this device had to be replaced nothing I could do
@rowenhintay5325 ай бұрын
@@bugzemotry to insert anothet card
@miltfitz1337 жыл бұрын
Ole'
@bugzemo7 жыл бұрын
@bill bixly, or whomever you are... "Not really", we were able to get our quote(s) from quite a few HVAC contractors / Heating people. The "smoke" issues was actually "Steam". No cracked boiler, just a leaky / broken valve that let water / steam get to the bottom of the furnace. After a valve change, re-check of all systems, including a few more replacement parts, (just to be on the safe side) we were good to go. Hoping again to make it again, through another winter!
@billbixly43327 жыл бұрын
completly pointless
@RainbowReigns10 жыл бұрын
So a diamond cut blade is the best blade to use when cutting these temperd hardy boards??
@bugzemo10 жыл бұрын
Suzanne, I used the diamond cut blade for "Slate Cutting" (Cutting Roofing Slate). My better half also does painting Slate (Slate Garden Signs). I will have to recheck which type of blade I used since this video is a few years old. I'll check back with you in a few days. Milt
@RainbowReigns10 жыл бұрын
OK, thanks.
@RainbowReigns10 жыл бұрын
I had tryed the Diamond blade once and only got about 5-6 inches in before it wouldn't cut it anymore, but my blade may be dull.
@bugzemo10 жыл бұрын
Suzanne, So, I didn't get a chance to really follow up on the type of blade other than to see that it was not a diamond cut blade. I believe it was just a general purpose wood blade (since the Masonite board is just compressed board). Also if you did not notice, while changing the blade, I actually had a wide blade on the saw for ripping or cutting railroad ties (at 1:45 min. into the video). You will also notice, sitting in the box, the blade I switched to had smaller teeth and again I:believe it was just a general purpose wood blade. Milt
@RainbowReigns10 жыл бұрын
Good timing! I was wanting to try cutting on it again this morning. I had the same thoughts as you about using blade for cutting wood because of the material it's made from, so I'm going to try that, thanks for your help. 😀
@gbowne110 жыл бұрын
Milt, I have a drawing in PDF of a stamping/punch press die set that needs completed and revised so that it can be sent to the machine shop. There are many incorrect locations and several other errors. The person working on it was doing it all incorrectly. The ISO/Assembly drawing is upside down and backwards. I can send you a complete & correct X/Y hole location schedule/table in GoogleDocs Spreadsheet or Excel or in a table in Word. I can send you the PDF that was completed. I need a copy of the resulting DWG/DXF, etc files. Can you do this?
@bugzemo10 жыл бұрын
Thanks again for your comment and review Greg. I have all the information and should be able to help you out!
@bugzemo11 жыл бұрын
For us (my better half) the smooth side faces down since we are marking up, or measuring on the rough side. I don't know if she is using oils or acrylics but she does prefers to work on the smooth side. I know there are some artist that prefer to work on the rough side however, they are also using gesso to prepare the painting surface. With that in mind, I would always keep the rough side facing up, and the smooth side down. Keep in mind the board is on another piece of plywood for protection.
@bugzemo11 жыл бұрын
@downtown8211 жыл бұрын
OMG Thank you for showing this... I thought my afghan girl was the only one who is doing this... :D
@bugzemo Жыл бұрын
I want to say, It seems all "Hound Dogs" howl, or whine like that
@bugzemo12 жыл бұрын
FPL....(Florida Power and Lighting?)
@drumnistic12 жыл бұрын
I remember Sara Lee 1975...lol
@oldtimedrumcorps12 жыл бұрын
Anyone ever hear of Sara Lee '75?
@083leo12 жыл бұрын
@edowney1234 YES it was...SUN COLOR GUARD always on POINT. Judges all needed glasses this year and in 1989. Sun surpassed Bush both years HANDS DOWN....
@MrDavedrum112 жыл бұрын
tommy swann too a great soprano
@bugzemo13 жыл бұрын
We just got our power back (Lost about 2:00pm) the wires are starting to come down here.
@bugzemo13 жыл бұрын
The reason for posting this video is to point out that the GSP tolls in some cases "STILL" are not working after a large promotion to record & photograph license plates of driver if you do not pay the toll. My gripe is how can you enforce a fine, or penalty if the toll booth (s) still are not working?
@bugzemo13 жыл бұрын
Video of the front path soaked from the sump pump use due to Hurricane Irene
@3063Albie13 жыл бұрын
Since I took this video I can tell you this was shot in Giant Stadium in 1981. This was at the Dream show. Albie St, Vinnies.
@mholub13 жыл бұрын
I was the perc. caption head that year. GREAT year!!
@mholub13 жыл бұрын
Hope some one can put a better quality vid. of this year up here........please :(
@TennTux13 жыл бұрын
Hi donbucs! I was there as well! (hehe)
@DJDONbucs13 жыл бұрын
I was at that show. This brought the house down!
@Mcy2Stini13 жыл бұрын
I marched that year! Best fun ever!
@191140114 жыл бұрын
87 was ET and the planets.fiddler was earlier
@191140114 жыл бұрын
DCA World Champ,Smokin hornline,Bobby B ...best soloist.
@191140114 жыл бұрын
Won that show....Hey Paul how's Gennie ?
@oldtimedrumcorps Жыл бұрын
What Paul what Gennie what year?
@191140114 жыл бұрын
One of the most talented horn lines EVER bar none,rest in peace George and John...GREAT SKY SOLOISTS