JC's Equipment Repair

Пікірлер

@mikepyatt7031 7 күн бұрын

👍🏻👍🏻👍🏻👍🏻

@ALex-yv8xw 14 күн бұрын

If the switch goes , does the vacuum just stop ?

@jcsequipmentrepair6130 14 күн бұрын

Yes, but….. it is more likely the thermal sensor tripped and shut the vacuum off. Wait 30 min and let the vacuum cool and then test it. If it starts back up then there could be too much restriction in the vacuum causing it to shut off. I don’t change many switches on these vacuums. The number one issue i have is the motors going out or the power plug. Check to see if the prongs are burnt. That is also very common

@ALex-yv8xw 14 күн бұрын

@jcsequipmentrepair6130 Thank you, Today she fired right up , I also changed the filters / bag ... Thanks Brother

@TheMaggie1995 14 күн бұрын

My vaccum suddenly stopped. When I pressed on the switch, it won't turn on. How do I know which part of the vaccum I need to replace?

@jcsequipmentrepair6130 14 күн бұрын

Wait about 30 min. You might have restriction on the vacuum causing the thermal switch to shut the vacuum off. Make sure your filters are clean if that’s the case. Also take a look at the power plug and see if 1 or 2 of the prongs are black and burnt. If so, you’ll need to replace the plug. You can also test it with a multimeter which I’m planning to make a video very soon.

@ganbaatargombo7694 20 күн бұрын

Mine is sprinkling supposed to or not

@jcsequipmentrepair6130 14 күн бұрын

Not sure what you mean by sprinkling

@lukejones7366 13 күн бұрын

Sparking?

@N1ghtH4wk86 20 күн бұрын

Had to buy another roller bearing clip. Thats a cheap plastic part that breaks easily 😅

@jcsequipmentrepair6130 19 күн бұрын

Extremely easy

@ChristineLauriello-z7k 2 ай бұрын

Thank you very much!! This was Extremely helpful!

@mikepyatt7031 2 ай бұрын

🔥🔥🔥🔥🔥🔥

@steveheidel-h6m 3 ай бұрын

I have fixed vacuums for 30 years for my business. JC is very helpful and easy to understand. Cheers!!, Thank you!!

@PrisonTorture34 3 ай бұрын

If the ground pin came off, would you recommend replacing the entire switchbox?

@jcsequipmentrepair6130 3 ай бұрын

Just the cord side it’s a lot cheaper. I have another video on how to do it

@jcsequipmentrepair6130 3 ай бұрын

Here is the video on just the cord Pro Team Super Coach Pro 10 Power Plug Replacement kzbin.info/www/bejne/l2LKYp6ErKmIq68

@PrisonTorture34 3 ай бұрын

@jcsequipmentrepair6130 wow! I wish I would have known. I replaced the whole switchbox. Good tutorial regardless. I might buy the switch and have a backup box ready to go just in case

@bertsnyder8492 4 ай бұрын

Thanks nice job

@juancarlosm2033 5 ай бұрын

Thanks for you video!! That help me a lot. 👍

@abarenas3018 5 ай бұрын

How do you know if it needs to be a plug replacement or a power cord and switch replacement?

@jcsequipmentrepair6130 4 ай бұрын

I use a multimeter and put it on ohms/diode. I put one end on one probe and the other where the plug goes into the switch

@abarenas3018 4 ай бұрын

@@jcsequipmentrepair6130 oh okay thank you it turned out being a power cord and switch replacement. Thank you so much for your videos

@scottmurphy1682 6 ай бұрын

Was it really hard to remove hard tobeven see it. Thank you for the good video scott

@canondvman 7 ай бұрын

How do you know if the switch is really the problem?

@jcsequipmentrepair6130 7 ай бұрын

I put the multimeter on either ohms reading or diode. I will have a video out soon that shows how I do it.

@abarenas3018 5 ай бұрын

Please🙏🙏🙏

@Atown76703 8 ай бұрын

I replaced the switch assembly and vacuumed for 2 hours and now it doesn’t want to turn on. My power cord is getting power but when I turn the switch on, it doesn’t turn on.

@jcsequipmentrepair6130 7 ай бұрын

It’s probably the thermal switch. Make sure it’s clear of debris and has a new bag in it. A lot of restrictions and heat will cause it to shut off until it’s cool.

@markphillips5828 9 ай бұрын

Nice overview, where are you located?

@jcsequipmentrepair6130 9 ай бұрын

Utah.

@cfosp1 10 ай бұрын

Excellent video, no superfluous yacking, just showing how it's done.

@JashonHernandez-hy9lb 10 ай бұрын

Thanks video help alot

@JashonHernandez-hy9lb 10 ай бұрын

Thanks man this video save me from throwing my 600$ vacuum away and I really recommend this video in case of other problems

@philliphall5198 11 ай бұрын

I really like the adjustment type on theses engines, very very good engine design 😊

@jcsequipmentrepair6130 11 ай бұрын

I agree!

@gerardowilly9348 11 ай бұрын

This video it’s really helpful for me. I almos trash my vacuum but with your info video can do it by my self. Saved me a lot of money. And learned using your video. Thank you for the time your taking doing videos.

@hoaglandranch2485 Жыл бұрын

Thank you for the video. Exactly what I needed!

@jcsequipmentrepair6130 Жыл бұрын

Great to hear!

@vardiscustomfloorsandmorel8604 Жыл бұрын

Thanks bro, this was very helpful

@12345660835 Жыл бұрын

Tem vídeo como remover o.motor

@jcsequipmentrepair6130 Жыл бұрын

si esta semana.

@12345660835 Жыл бұрын

Vc tem vídeo completo como desmontar o motor e fazer reparos pois ele não liga

@jcsequipmentrepair6130 Жыл бұрын

kzbin.info/www/bejne/rnqppqyOobuHaassi=XvNiP-xQhGMqik7s

@danielmenjivar022820 Жыл бұрын

Thanks for your help

@ChristinaShaw-y2w Жыл бұрын

Ok so I don’t even take the time to write reviews because I’m so busy. But this guy totally deserved one. Thank you so much for helping me fix my vacuum all by myself as a woman. You made it super easy in the video. I own a cleaning company. My vacuum broke on the job. Your video saved me. Thanks.❤❤

@jcsequipmentrepair6130 Жыл бұрын

I appreciate that!

@JackieAnice Жыл бұрын

Our prongs keep burning up in the extension cord. Is this a manufacturing issue?

@jcsequipmentrepair6130 Жыл бұрын

It must be I spoke to a rep from pro team and what they told me was that the cord we were using was maybe being tugged or not set correctly which I think is BS. At this point I’m not sure what’s going on. I do know we have had many issues with these

@israeldiaz6743 Жыл бұрын

Thanks. Amaizing video.

@vinceleto Жыл бұрын

Is the switch a common cause for the unit going on and off every few minutes? I have a unit that almost seems like it goes into a thermal overload protection shutting itself off

@jcsequipmentrepair6130 Жыл бұрын

Might be an internal short on the switch but most likely it’s the thermal protector because it feels too much restriction. I’ve had that happen more often

@FootballPicante Жыл бұрын

Thank you

@eliopablo152 Жыл бұрын

Plugged it into a wall 🙄🙄🙄🙄

@rafiqrafiq8522 Жыл бұрын

Thanks for this simple video

@fernandopalencia4991 Жыл бұрын

Is the switch the main issue when a short happens? I plugged it into a wall outlet at a clients office and a huge spark flashed and my vacuum wouldn't turn on anymore.

@jcsequipmentrepair6130 4 ай бұрын

Usually it’s the plug itself. It starts to ark pretty easy when it’s a little loose (what proteam told me) so make sure the extension have a tight fit with the plug

@colper9677 Жыл бұрын

Great video

@terryguin9529 Жыл бұрын

If you had taken top off first we might have seen what you were doing to disconnect/reconnect the carburetor. Otherwise a very helpful and simple video. Exact model I have. Thank you 👍

@mariogeorge9334 2 жыл бұрын

video helps a lot thanks

@ArmandoHernandez-hy6eo 2 жыл бұрын

My brushes is not turning. How do I fix the problem?

@jcsequipmentrepair6130 4 ай бұрын

There’s a belt or a roller on the sides with bearing it just depends. Most of the time it’s the belt.I will be making a video when I get a machine with that issue

@travis8059 2 жыл бұрын

Thanks for this simple video.

@Treefoxxi 2 жыл бұрын

Ugh I have that machine, having problems with the hose and wand for it, and I don't know who go to 😭

@jcsequipmentrepair6130 2 жыл бұрын

Part wise? Or just hooking it up?

@Treefoxxi 2 жыл бұрын

@@jcsequipmentrepair6130 I can get it hooked up, and It feels like water gets into the hose but it's not coming out the end of the wand, the hose does feel like it has a pressure to it, like it gets tight, but no water comes out the end. If I don't hook up the hose and I just flip the lever on the machine to run the water out that spigot it works, so I think it's just the wand

@N1ghtH4wk86 20 күн бұрын

@@Treefoxxi check your seals might not getting enough pressure

Ең жақсы KZbin

Пікірлер