Installing mine now its not fun without a sun roof very little room one more light to go and put everything back together for the head liner
@easy82323 күн бұрын
So if the blinkers are plug and play what is the other wire for
@boostautoparts3 күн бұрын
Running Light & Reverse Light
@paoloarceta92624 күн бұрын
can you install this with the other wiring option kits?
@boostautoparts3 күн бұрын
Yes
@paoloarceta92624 күн бұрын
can you install this with the other wiring option kits?
@boostautoparts3 күн бұрын
Yes
@paoloarceta92624 күн бұрын
can you install this with the other wiring option kits?
@boostautoparts3 күн бұрын
Yes
@kurtisgothreaux30574 күн бұрын
Can you tell me how the round hole drilled with the step bit works with what appears to be the square setup similar to OEM lights utilizing the square hole? Thanks.
@boostautoparts4 күн бұрын
We have a custom clip included in our retrofit cab lights that we designed and tooled to work with a round hole. The clip is unique to us and was specifically designed to avoid cutting a square hole.
@kurtisgothreaux30574 күн бұрын
@@boostautoparts fantastic. Thank you.
@p0larbearRLP6 күн бұрын
If I tap them into the bed cargo light instead of the reverse should I still use the 3amp fuse?
@boostautoparts5 күн бұрын
The fuse rating wouldn't change; the fuse is based upon the draw of the mirrors not the circuit it is tapping to. That being said, we haven't validated any bed cargo light wiring so we are unsure if this is feasible or not and whether that circuit can support an additional load.
@98RSPSupra6 күн бұрын
Because reviews are not enabled on the Boost Auto website: Installed M2 running boards with sequential turn signal and running lights on 08/17/24. Truck: MY24 Denali Ultimate 3500 Review Follows: Positives: 1. The packaging was very nice. 2. The M2 boards look very nice when fully installed. Negatives: 1. The driver and passenger side running board mounts make use of a L-Shaped bracket with threaded rod that inserts into the holes in the truck body (held in place by a square plastic retainer) then secures to the top of the brackets. In the case of 2020-2024 Chevy and GMC HD trucks, your truck may have 3 or 4 threaded holes available for mounting. The method that BA has chosen with the L-shaped bracket is not a well engineered design. The brackets could have been designed to accomodate 3 or 4 existing mounting holes without the need for the bracket which to me was a work-around. Deduct 1 for the poor design of the front brackets. 2. The wire harnesses are way too long. With a very well thought out and nearly invisible installation, I had about 2.5 feet of harness to wrap up, zip tie, and hide on the driver side and 3 to 4 feet of harness to wrap up, zip tie, and hide on the passenger side. The control box cable is ridiculous and would have strung out almost the length of half the truck. Although the harnesses are designed to fit several different trim levels of Silverado and Sierra HD trucks, none of them require harnesses this ridiculously long. Deduct 1 for the not well thought out harness length. 3. If you have smoked sidemarker lights and/or smoked mirror lights, the light strip on the M2 running boards are not smoked (could be an option) and as such are brighter than the other smoked lights that one may install in conjunction with the M2 lighted running boards resulting in a mismatch. Deduct 1 for not having a smoked option. 4. The front and rear brackets on both the driver and passenger sides work independently of each other. When the motor on the front brackets actuate the boards, the boards are to come down at the same rate front and back and parallel to the ground. In fact, the boards do this, but once deployed, if you step on the boards, they will come down ever so slightly (1/8 to 1/4 inch but noticeable) when weight is placed on them. If you look at the video for which this review is part of, you will see it actually occurs on the video so it is inherent to their design. I was meticulous in my installation, and so yes it is the design; this didn't occur with the factory automatic boards on my Denali Ultimate for which there was a steel rod between the front and rear brackets to ensure the brackets go down evenly and fully deploy. Deduct 1 for not deploying 100% (98% is not good enough for the price). 5. For MY24 Denali and Denali Ultimate HD owners with trucks that come factory equipped with automatic running boards (I am sure this applies to some of the Silverado HD trims as well), there is an option on the touch screen to deploy the running boards when the vehicle is in park (e.g. when washing the vehicle). This option is lost with the BA boards. I assume the MY20 through MY23 Sierra HD's with the pushbutton to deploy the running boards would lose this functionality as well. Deduct 1 for loss of a nice factory option that helps when cleaning your vehicle (e.g. at a carwash). 6. Missing lockwashers causing me to have to run to the hardware store to get them (black anodized and metric). Self explanatory and no they are not laying on my garage floor. Deduct 1 for quality control. 7. Entirely my personal opinion. Deduct 1 for the "Made in China" parts. It' s writren on the boxes and parts were likely sourced elsewhere as well. For the price they should be entirely designed, sourced, procured, manufactured, tested, boxed in their entirety in the U.S. Tips: 1. Remove your front fender liners to install the M2 boards. You will need to do this to tie up all the extra harness length. Don't use coat hangers and other techniques. Overall Rating 1 to 10 (with 10 being best): 7 I bought these with the EarlyM2 sale in which the running boards were 25% off with the pre-sale discount. The wait was no issue. If I would have paid full price my boards would have been about $2100 (plus tax). They ended up just over $1500 plus tax. Spending the better part of a day installing the M2 boards and seeing where they could have been improved upon, at full price, I would not buy these. At the 25% off price, I would maybe buy them. I am quite picky and would maybe flip a coin; heads yes, tails no.
@boostautoparts5 күн бұрын
Hi Kip, thank you for your thorough review! We're greatly appreciate of your feedback and we're glad to hear you're enjoying your new Lumastep M2's! Constructive feedback is important with any new product launch, so we're passing along your comments to our team for consideration. A member of our Customer Success team will reach out to address some of your unique concerns!
@98RSPSupra5 күн бұрын
@@boostautoparts One last comment; the BA M2 boards although about 2 inches narrower and about 12 inches shorter than the factory powered boards do not tuck under the edge of the cab nearly as clean as the factory boards. Yes, mine are aligned, tight, etc. Also, I was not thrilled with the double badging (one being boost auto and one being lumastep m2) on each board. They cannot be removed or "hidden" for a cleaner look.
@marcusrobles12396 күн бұрын
I'm hoping to get a set to replace my factory power steps on my F150. My only concern is the wiring, and if the computer will work with them.
@boostautoparts6 күн бұрын
What year is your F150?
@marcusrobles12396 күн бұрын
It's a 2017. I know they'll mount up just fine, but will they work with the controller that allows me to program the steps to either stay open, never open, or open with the door?
@boostautoparts6 күн бұрын
@@marcusrobles1239 the F150 video can be found at the link below. They will deploy with the door, however we do have a cleaning mode to keep them deployed. You can watch this video at 28:42 to see how kzbin.info/www/bejne/bqW0pH2wrtSsrdU
@gooseman75227 күн бұрын
Will the power adjustment function on a 2001? I’m not concerned about the lights needing to be wired in so much as retaining the power mirrors
@boostautoparts6 күн бұрын
Not with these mirrors unfortunately as the plugs are different on 99-01 vehicles. That being said, we do offer mirrors for a 2001 - you can check them out on our website or give us a call at 765-831-2830
@Hathorr10677 күн бұрын
Glad you made this video. Now I can fix what the previous owner did.
@boostautoparts6 күн бұрын
Happy to help!
@GRobledo5127 күн бұрын
Are you going to do a video on 2024 Ram 1500? My order just came in 😎
@boostautoparts6 күн бұрын
Beat you to it - here you go! kzbin.info/www/bejne/nX3InIOBfKunq80
@davidkmillerphotography9 күн бұрын
Awesome. I can't wait to install this and use it when I'm off roading out in the middle of the woods and camping.
@boostautoparts7 күн бұрын
It will certainly help give you more light!
@abdullahalzuwayed82119 күн бұрын
its came with key and if it came can use the key
@boostautoparts7 күн бұрын
There is a key blank built into the 2020 style fob, however the size is not appropriate for all trucks it depends on your specific original key.
@chipsammich20789 күн бұрын
Where the heck do you buy the metal clips on the back of the glass
@boostautoparts9 күн бұрын
We offer them with the purchase of glass - give us a call 765-831-2830
@chipsammich20789 күн бұрын
@@boostautoparts everyone offers them with the glass.. I just need the clips
@boostautoparts9 күн бұрын
@@chipsammich2078 Sorry - the clips aren't considered a service component by themselves. If you previously bought mirrors or glass from us give us a call and we can see if we can make an exception.
@chipsammich20789 күн бұрын
@@boostautoparts Thanks I found them
@lukemiller58969 күн бұрын
Do they have the factory blind spot sensor?
@boostautoparts9 күн бұрын
The lights aren't equipped with blind spot sensors; however if you're referencing the mirrors YES we do offer them with blind spot monitoring.
@drake213810 күн бұрын
Could I use the stock oem 2020 model fob shell and put boost auto board in it to make it work? Just to give it that oem look.
@boostautoparts10 күн бұрын
Unfortunately we aren't sure if our board will fit correctly inside the OEM shell
@maintenance9610 күн бұрын
why pull out the puddle light? Can you just leave in place and connect the wire harness after switching out the turn signal light?
@boostautoparts10 күн бұрын
We find it easier to work with by removing it
@jonathandejesus949410 күн бұрын
ufff, can I do this on the Colorado ?
@boostautoparts10 күн бұрын
Unfortunately this doesn't work on Colorado vehicles. Sorry!
@raymondtremblay851611 күн бұрын
Great vid!!! You forgot 1 key step tho. Test equipment prior to reassembly lol 🍻
@boostautoparts10 күн бұрын
Not a bad idea, though sometimes if you cycle the ignition with things unplugged it can trip codes!
Please call our team at 765-831-2830 for assistance
@nevinkelley253015 күн бұрын
Will The lighting functions work with an 2004 F-250 super duty?
@boostautoparts13 күн бұрын
Yes they will
@stickymontana3316 күн бұрын
Are y’all planning to make any for 2024 Toyota Tundra’s? Thanks
@boostautoparts16 күн бұрын
Not in the current plans, but I'll share the interest with the development team for future consideration!
@pbots4d17 күн бұрын
Does the fob also open the back hatch and door?
@boostautoparts17 күн бұрын
We don't currently offer a fob for these specific vehicles that do that, although I will share the interest with the development team for future consideration.
@traviscolter139417 күн бұрын
Terrible video. I'm here to install the product not watch a fucking ad
@pashabelat284917 күн бұрын
1 year warranty?
@boostautoparts17 күн бұрын
All of our products come standard with a 1-year warranty as well as lifetime technical support. On top of that, we stock service components so if anything were to fail you can service the component rather than the entire set.
@pashabelat284917 күн бұрын
@@boostautoparts Thank you for the prompt response! i
@1blktalon17 күн бұрын
I was looking at these yesterday. I just need to get power fold in. Thanks for the video.
@boostautoparts17 күн бұрын
Glad to help!
@1blktalon17 күн бұрын
Thank you.
@stickymontana3318 күн бұрын
Any love for Toyota Tundra’s? Thanks
@boostautoparts18 күн бұрын
We've got mirrors and steps for Tundra's, but no cab lights at this time!
@jku392adventures18 күн бұрын
🔥🔥🔥🔥🔥🔥🔥🔥🔥
@boostautoparts18 күн бұрын
These mirrors go great on JK's!
@Zerxez19 күн бұрын
Where are you guys located and do you offer installation?
@boostautoparts18 күн бұрын
We are in Illinois but do not offer installation - sorry!
@calebweston762321 күн бұрын
will this still work normally if I have my fogs on with lows them I turn on my highbeams all lights will be on?
@boostautoparts20 күн бұрын
Yes
@gavblunk920221 күн бұрын
can these be installed/ will all the light features work on a Work Truck trim with non power doors?
@boostautoparts20 күн бұрын
Yes - though we would probably recommend purchasing the 99-02 mirrors if you don't have power mirrors because the wiring is better for hardwiring them in. Give our support team a call at 765-831-2830 and they can guide you to the best set for you!
@jaydab21 күн бұрын
I have power mirrors already and 1 of mine stop working. I want to replace and put these mirrors on both side. Is this a plug and play go if I order these with no extra hooking up wires. I mean it should just plug right in like my old and should work fine? Is that correct?
@boostautoparts20 күн бұрын
Yes - depending on the features you select. Give our team a call at 765-831-2830 and we can make sure to get you a set that is completely plug and play.
@rocker188921 күн бұрын
Attempted installation yesterday. I connected the harness exactly as in the video. Tried to plug in the connector from the door jam to the truck it would not click back into place. My windows are down, locks don't work. I have to take it to a shop on Monday morning to see if they can fix it hopefully not for a fortune. I should've just took it to the shop and had them do the installation as the video looks easy but I glitch in my truck.
@boostautoparts20 күн бұрын
More than likely the white latch isn't slid back properly; it has to be unclipped for it to slide in. Give our support team a call at 765-831-2830 for assistance, we are here to help!
@ryanbigos996421 күн бұрын
Just got mine and doesn’t work hopefully get a new one 🙄🙏🏾
@A.N.T.0.N.I.022 күн бұрын
I gotta say this. You brother, have the most clear voice, and the explanations to every detail are amazing, keep it up. Subscribed.
@erickeggert416222 күн бұрын
is the defrost in the factory mirror plug? mine truck does not have factory mirror defrost.
@Kmh.22 күн бұрын
Will this fit to my surf ssr-x 1996? I’ve seen people install it but i wanted to confirm
@PallBEARer73022 күн бұрын
What’s the name of the harness dongle you use the turn signal lights
@FanStalin24 күн бұрын
Im sad you guys dont have a button for the barn door/rear unlock :( thats the only thing preventing me from purchasing it for my dad
@boostautoparts24 күн бұрын
Sorry!
@DeviousD70725 күн бұрын
What is the name or brand of that crimp tool? I used to have a pair and now I can’t find them anywhere.