I love them both and they both perform extremely well , but if money was not an option i would go with ZCO just because i feel it cuts through the mirage and the clarity is a little bit better .

What’s the muzzle diameter on your 700? I have a Tikka T3, .308 with .650 diameter at the tip. Clay, Eric’s tech rep, told me to request 1/2 28 treads for the EC/AR Hunter brake. I’m concerned that even 1/2 28 will take too much metal off the barrel. Also concerned that 1/2 28 won’t stand up to the blast from a .308.

@@DM-w5o the barrel diameter is 15.54 mm at the muzzle, bore is 7.62 mm

The tuner brake is tuning the harmonics of the barrel , so it will work on any rifle barrel. To get the max benefit of any tuner everything else on the rifle has to be checked or verified for accuracy. For example if my barrel is not free floated or it’s touching somewhere on the forend i may not see the effects of a tuner as good as if the barrel was corrected and ensured it was free floated .

Planning on it once i get back to the states

With weights its around 22lbs with out its about 14lbs

No way those little ingots weigh 8lbs.

The V2 is lighter , i don’t have the numbers in-front of me at the moment

If it will tighten up groups on a 338 lapua , i dont see why it wouldnt for a 30-06

Yes i did notice , i believe that is because the V2 actually gives you more adjustments both ways which the V1 you only go one way to start . What i am noticing as i play around with the V2 is the colder the weather you turn the tuner toward the shooter to get back in tune and vise versa the hotter temps you turn away from shooter . Every time the temp drops more than 10 degress from my initial tune temp which was around 70 ish i will go out n confirm and adjust and record the tuner setting with the temp .

I have the V1 and with the V2 I put it on my Tikka Ctr 6.5 Creedmoor, started at 0 and turned it in toward the action. O setting 2 shots 1/2 apart went to 1 setting same for 2 shots. Number 2 setting I shot 2 shots literally in the same hole. Figured I'd try a third it went in the same hole. .076. Decided to shoot 2 more for a 5 shot group and opened up to .33. Anybody says tuners don't work. I beg to differ. Awesome product. This was a load that already shot good out of the rifle. 140 Eld m 41.6 gr H4350 lapua brass Cci 450 primers.

Thank you , im currently working on the load development for the 308 , will post videos start to finish

When the brake redirects the gases directly backward via the ports ,the effect is similar to the reverse thrust system on an aircraft jet engine: any blast energy coming back at the shooter is pushing "against" the recoil, effectively reducing the actual amount of recoil on the shooter but the shooter feels the gas blowback , having the ports back at the shooter is the most effective way to have less felt recoil. The EC tuner has changed the first 2 ports to help keep some of that blow back from effecting the shooting. Hope this helps , if not i can simplify it more .

Basically just pulling the rifle away from the shooter when the gasses leave the brake.

To light your cigar's, really fast

Also keeps your eyebrows at Bay 😂

Thanks , took some time been saving money for a while for this one

Keep in mind when you tune with the V1 because it has tension screws , it will have a little backlash between the threads. So lets say as you test the tuner and number 5 prints the smallest groups and you are done testing , turn the tuner back go past 5 a number or two then slowly turn it back to 5 . By doing this you will take the backlash out of the threads and place the tuner exactly where it was when you was doing the testing. Hope this makes sense .

For a 308 the recoil is very minimal, however it is also a 25 lb rifle , as far as noise it is not super loud .

Thank you , i will find out soon about the tension spring when i start load development

I plan on it , i just need time

Yes its the area 419 arcalok rail , it is not the R-lok that has the small holes on the bottom .

Yes

Weibad.com

No lol , you got candy with yours ?????

@@mindfulrifleman7198 a strawberry hard candy and a decal. The sweet was probably to take the bitter taste left by the price tag on the tuner brake. 😂. It does work though.. I can’t complain. Really nice machining, the finish was really nice and it does perform as advertised. Happy shooting!