Muchas gracias.

Muchas gracias por tu comentario.

Thanks for your comment. For more information you can reach us at [email protected]

In normal, these MVR evaporator treat water for industrial purpose. Produced water is desalination as these water turn from steam (but a defoamer needs to be added to the shell and water level should not such high, to avoid small drop flush up with steam). For domestic using, the raw water should be pretreated, making it no volatilizable hazardous substances contained, as they will also evaporate. Seawater could be turned to fresh water by these MVR evaporator, but not chemical industry waste water (treated water from chemical industry should be used for other purpose such as cleaning but not drinking).

este evaporador no sirve, muy mala experiencia con el, lo tenemos como obsoleto, ni el mismo proveedor lo a podido arrancar

¡Saludos, Sr. Troncoso! El equipo sirve para evaporar agua, es decir, su el preparado tiene una mezcla de MEG, agua y sales, con este tipo de equipos se podría lograr eliminar parte del agua, incrementando la concentración de MEG, pero también incrementaría la concentración de sales. Si el problema está enfocado únicamente en las sales en MEG, los procesos a aplicar serían distintos. Estos procesos dependerán de la cantidad inicial que tenga, a qué quiere llegar y las condiciones de trabajo. Si está interesados, les podemos hacer un estudio de cual sería la mejor tecnología a aplicar. Puede enviar su solicitud a nuestro correo [email protected] y uno de nuestros agentes le atenderá en la mayor brevedad posible. ¡Esperamos que tenga un buen día!

The little water that comes out is probably clean enough to pump into a flood.

If you did know tell me plz

Mohamed Fahmy how can I contact you for industrial water treatment

As you said, it can't be applied for sewage treatment, but it's a very efficient solution for industrial wastewater, such as brines, emulsions, washing wáter, etc.

Can not be. Sewage water should be pretreated, otherwise will fast clog the heat exchanger. And the MVR method is cheap for industrial waste water, but expensive for sewage water. For sewage water, these MVR equipments are normally used in sewage water treatment plant to deal with high salt content water, which come from sewage water membrane processing.

Thanks for your comment. A single effect steam evaporator needs 0,75Kwh to evaporate 1 kg/h of water. A single effect heat pump evaporator needs 0,18 Kwh to evaporate 1 kg/h of water. A single effect MVR evaporator needs 0,035 Kwh to evaporate 1 kg/h of water. If you have any other requests you can write us at [email protected]

@@Condorchem This is not viable for industries like textiles here in Pakistan, where waste water volumes are 300000 kg/h to treat. The electric power required is 10MW. Only small capacities are viable.

@@rafaeengineering MVR and Heat Pump Evaporators are used for large quantity effluents from textile, garment, metal plating industries etc. after pretreatment, UF and 3 stages of RO resulting more than 90% of low TDS water for Re-use. Remaining highly concentrated effluent is treated through the highly energy efficient MVR / Heat-pump Evaporators. Many successful installations are used at Tiruppur Garment Industries in Tamil Nadu state of India under ZLD systems.

Thank you