Taiwangun ou Gunfire, mais ça date ! Autant ça se trouve en France maintenant. Et elle a rendue l'âme, crosse pétée suite à une chute.

Hi, .4 Specna Arms, but any .4 will do.

What are you talking about. English too difficult for you ?

@@NiceAirsoftEquipe English is not difficult for me! I like to write in my native language! Is Russian too complicated for you to read?

@@mr.erm23 Well, yes. :)

Faite à l'arrache, mais merci de ton commentaire <3

:/ Hope you're doing ok though.

Bonjour, aucune idée, mais c'est certainement du format US. Vaut mieux contacter Tippmann directement, en général ils envoient un remplacement.

Bien entendu ;) (réalisé sur canon PDI 6.01 installé dans un G18 E&L).

Aucun problème !

Merci, doit y avoir moyen de gratter encore quelques mètres ! :)

Salut les gars, la team serai très heureuse de jouer avec vous ! Prenez contact sur notre page Facebook (voir la description) et on verra ce qu'il est possible de faire.

Thank you. Using Firefly Q6 as scopecam with 25mm lens and Firefly 6S stock lens. All in FHD @ 60fps, with upscale @ 2k as we spoke about for forcing VP9 codec. A bit of postprod regarding brightness, contrast & sharpness (using flat profile on both cam for better postprod result). Interested into Firefly X when it's out : 4k @ 60fps ! :D

En rentrant, tu aurais vu l'état du joint...là ça va mieux ! Mais oui il y a un espèce de "cooldown" quand tire trop de billes à la suite. Ma foi...

C'est ce qui se dit :P !

Thanks a lot for your kind comment ! :)

Hello, never heard about someone doing it before us, and yet we searched for people doing it in order to avoid making a video ;) . Well, nevermind, we didn't monetize the video so...

Nice Airsoft Equipe doesn’t matter if you monetized, actually couldn’t care less if you did. It just sucks to see the techniques that I came up with (far as I know I’m the originator of using Polly tube to form the inside of the patch) to do these taken.

Well, we understand how you might feel but rest assured that we didn't know about you at all and those come up from our own experiments :/ !

Bonjour, c'est 0.08j la puissance maxi pour les mineurs. (cf. Décret n° 99-240 du 24 mars 1999) En plus, pour des questions d'assurance, nous n'acceptons pas les mineurs. Revenez à votre majorité on se fera un plaisir de vous accueillir :)

Salut, reviens nous voir à ta majorité, on te recevra avec plaisir :)

1:45 There's your answer. Sorry but we don't really understand the problem.

Does the rubber nob go ontop of the spacer?

Okay so you put the nub (the part that pushes on the hop-up rubber) where it's supposed to be, and that's it, then you just push the barrel in with the hop-up rubber on it, and voilà. We clearly don't see the difficulty you're talking about :|

Possibly, better ask the guy at Airsoftpro !

Ben écoute, elle tourne toujours aussi bien... Comme quoi, le matos AirsoftPro, c'est du solide !

Well, don't hesitate to tell us what you think when you try it ! ;)

Well, yes and no. The more you add starch, the harder the patch is when fully dry. So maybe if you shoot like 500fps, you'd like it a bit stiffer than if you shoot 350 fps, but honestly the patch we have right now (over 7k bbs) is very stiff, and shoots really great regarding range & accuracy.

i see. i going to try that out after my exams

Yes please, and don't forget to give us your feedback when you're done, we always appreciate it when people try out new things and tell us about it :)

sure thing

Thanks for your comment ! Not only did we do it, but we also are 7k rounds in now, shoot in real games, and so far...so good. Only problem is the hop chamber losing the adjustment, but that's to be fixed really really soon. And you wouldn't believe the range/accuracy out of this cheap mod... ;) !

Nice Airsoft Equipe I wanted to try this even sine I watched a video by the king of random. I think I'll try this are my exams

You'll be delighted. The freaking replica shoots well over 65m at 360fps @ .2 (using .3s, it gives 1.2j on chrony). And it shoots damn straight ! Just make sure you make the oogoo with enough starch so it feels sticky, but doesn't leave residues on your fingers. And leave it alone for a good 48h, just to make sure ;)

Well, not so much but thanks for the support ! ;)

Bonjour, le patch colle au canon sans avoir besoin d'ajouter de la superglue. Nous l'avons retiré pour montrer le résultat. / Hi, the patch is stuck to the barrel by itself, as oogoo should be just sticky enough to "feel sticky" but not to the point where it doesn't stick at all. No need for superglue =) patch was removed in order to show the final result. If you try to superglue it in place, please tell us how it goes.

bonjour, merci pour la réponse, testeront le week-end posterai bientôt le résultat, reconnaissant / Hello, thanks for the reply, will test in this weekend and will post the result, very grateful, regards...

No problem, keep us updated, we are always looking for feedback on things we present !

Hello, last week it rained a lot around here so I only could do the tests today, here's my feedback: First some considerations: It was my first try, so some things may not be perfect, lol. The most difficult part was to modify the bucking, where I ended up doing a micro hole lol, as I said first try ... I did the test with ogoo-hop and same ogoo as nub. My aeg and a m4 firing at 380 fps with 0.25 bb. As a result I could observe that it had a good improvement in accuracy, and a gain of 8 to 12 meters in the effective reach, it was not miraculous but I may be doing something wrong, I must try more often to improve the work, the fact is that it worked And I really liked the result. Now I ask: A harder nub, like the red rubber might be better than the ogoo? I'll do more tests on Sunday but I'm in doubt if I should change the arm of the hop up to put the rubber similar an m-nub, because some people said soft nub would be better, would it? Anyway very grateful I really liked the project posted and it really works. thanks...

Well, 8 to 12m gain on first try, even considering the fact that you can make the patch softer or harder by adding different amount of starch is really great ! Our advice would be to stick to your current hop up arm and make sure you mold your oogoo nub as showed in the video. If you already did that, allow a few days for the nub to fully dry, it will be quite stiff and do a perfect job. The oogoo nub should match exactly the size of your window barrel (which itself should match your hop chamber size), and provide great contact between your oogoo patch & bb, giving it both range & accuracy. As for you hop rubber modification, sorry I didn't show it in the video, but it's so popular on r-hop videos we didn't feel like including it :) Also, make sure to try with .30 bbs, you'll be amazed.

Salut, dans la réplique il y a un DSG avec M110 (ou m120 "faible", stock le ressort donne 400/410fps) + cale, la puissance pour ce type de setup est donc tout à fait normale, et il n'y a pas de joule creep, car elle passait à 0.8 avec chrony réglé à la .3 =) Suite entretien elle est remontée à 0.94j :) mais honnêtement, vu la portée...

Donc j'ai fait un petit test comparatif , niveau Portée c'est la même chose par contre la oogoo est moins dure donc pour 0.45 je sais pas ^^ mais pour de la 0.30 c'est les même perf , la oogoo plus facile a faire colle moins au tournevis donc moins de rater, par contre j'ai essayer les deux SANS patte d'appui , la oogoo hop up inexistant sans patte d'appui , alors que la sugru j'ai jouer sans patte d’appuis sur 4000-5000 bille a la 0.30 après j'ai du en rajouter une et faire des modification sinon ça lever trop , les patte d’appuis en oogoo sont top mais mou et fragile mais niveau perf rien a dire ( la copie des maple leaf tensionner ) Conclusion : Oogoo plus simple a realiser , plus fragile , moins dure . Sugru plus dure a réaliser ( ça colle souvent au tournevis selon les couleur de la patte ) Donc je conseil la oogoo pour du grammage léger : 0.25 a 0.36 et la sugru de 0.30 a 0.45

Merci pour le feedback. Concernant le nub, au bout d'une semaine environ il devient assez dur. Tout est question de dosage :) (patch & nub plus dur : le faire le moins collant possible, plus mou : un peu collant sans que ca laisse de trace sur les doigts). En tous cas ça fait plaisir d'avoir une comparaison ! Concernant le manque d'effet hop sans patte d'appui c'est assez étrange, mais bon tant qu'on peut bricoler quelque chose pour que ça fonctionne... ;) !