TLHendersonFarm&Restorations

Пікірлер

@richardharris2061 9 күн бұрын

You could use dual tires for it

@captainpegs07 Ай бұрын

That does not look like a chisel plow. Looks like a glencoe soilsaver.

@richardharris2061 2 ай бұрын

You need a tractor with a cab on it 😀

@ribragg 7 ай бұрын

Is your pto shalf bent?

@terrysavage2745 7 ай бұрын

Using the hand clutch to get the mower turning was nice on those old tractors. You have her sounding great!

@alspeers6931 9 ай бұрын

Either is garbage my friend, plug those old girls in and they will start right up,u get nice oil to the motor(way less wear)plus u save money on starters,batteries, and starting switches,cheers bro

@TJRedden 10 ай бұрын

I have a LA that my grandfather always told me the motor was good when he parked it. He has passed now and I’m starting to think I may have a project I should do. Any recommendations on where to get parts for these tractors?

@TJRedden 10 ай бұрын

Great video by the way!

@mattrowland-ue8rq 11 ай бұрын

We had one, it was a great tractor.

@raymondjackson2227 11 ай бұрын

I have 2 of them used on a consistent basis 1 has a JD cab, heat and no air because my Dad wasn't going to give $300 for the option, it now is s turning 190 hp. Dad and I bought the 2nd one used at a farm sale No cab turning 175 hp. The one we bought new has 9500 hrs 2nd one has 8700 hrs Love both these tractors

@MichaelOTool Жыл бұрын

540 rmp

@scottmattingly9643 Жыл бұрын

Nice very nice 👌

@MillCityJam Жыл бұрын

That's the same tractor as my Grandfathers... He loved that machine. It's funny seeing a quick release on it.

@JohnLorentzenIII-kg8cu Жыл бұрын

Very nice 4320. I have almost twin to to it. JPLIII

@charlesswhitlock Жыл бұрын

Im surprised you didn't need duals.

@PhilipFarrell Жыл бұрын

Please use ether ur killing ur starters

@rodneycody8746 Жыл бұрын

Nice

@SilverGleaner Жыл бұрын

I'm pretty sure the Power Shift was an option for the 4320.

@edwinschwartz2472 Жыл бұрын

No ,power shift was not an option. All 4320’s were synchro range.

@SilverGleaner Жыл бұрын

@edwinschwartz2472 it appears that Deere may have built 4 with Power Shift. I can't for the life of me figure out why Deere wouldn't have the 4320 available with PS. If the 4020 had it and the 4520 did, then you would think the 4320 would. Anyhow, I do think I'd like the 4320, even if it was green.

@robertclark4929 Жыл бұрын

Whos wants to listen to that loud straight pipe all day?

@RJ1999x Жыл бұрын

When I was a kid, I loved it, as an adult I hate it

@ihd-3603 Жыл бұрын

I used to love seeing the coal roll. Now I just cringe thinking of the fuel wasted. 😆

@triciahill216 Жыл бұрын

I have my grandfather’s 1953 WD and it’s in fairly good condition. Do you think a WD could handle a 6’ or 7’ rotary mower (brush cutter) or would it likely be too much for a WD?

@hubertbergen3000 Жыл бұрын

That taller grass is making the old girl talk

@davids6533 Жыл бұрын

I really like to listen to those little two cylinder engines run. It brings back some very good memories. : )

@richardharris7714 Жыл бұрын

Dual tie

@richardharris7714 Жыл бұрын

You need some two tie

@jackanapes6676 2 жыл бұрын

Had a 71 4320, would run 5 16s in northern Illinois soil. It was a good machine, replaced a few turbo's on it, overall a good unit. However, had a 4020 power shift that I preferred to run much more, and, to be honest there really was not a huge difference between them. Good video, nice to see the old ones still going.

@Cam-sm1iz 2 жыл бұрын

A Shout from West Texas Panhandle! Great Video, brings back many great memories for sure. The JD 4320 was one of the most underrated tractors produced. Those dudes were bullet proof.

@toddgittins5692 2 жыл бұрын

Plug it in.

@jakekiddall5108 2 жыл бұрын

How do you mix the jd paint?

@Masseyferguson65 2 жыл бұрын

You have One more subscriber here from NORWAY..I Really like the 4020 and 4320 They are so Nice a tractor . Hope you will do Some driving video's off your 4320 so we can See it and hear it Running.. I rebuild a massey ferguson 65 reighte now .. my you tube Channel is MF65 . Thanks so much for your video. Please my video off driving .. Thanks Michell Norway 😊👍🚜

@joeshaum5175 2 жыл бұрын

nothing quite like the 20 series

@brianmckin1395 2 жыл бұрын

Do u not know where the ether injector is??? And that blade will work twice as well if you pull it instead of ass raming it in to a pile at wfo!, Work smarter not harder

@jerryrogers8399 2 жыл бұрын

Too bad he couldn't find a muffler for it.

@toddgittins5692 2 жыл бұрын

Straight pipes are 4 rookies.

@ihd-3603 Жыл бұрын

I believe anyone who runs a tractor more than a few hours a day will appreciate having a muffler. 😆

@jackbraithwaite8345 2 жыл бұрын

Just found your channel. Good Stuff! Watched the 4320 video just before this one. I had a 4320 years ago, good tractor. I'm a new subscriber, keep up the Good Work. I had a 9500 GMC Dump Truck some 30 years ago with a 671. Thanks for the memories 👍🚜🇺🇲

@flyinryan1986 2 жыл бұрын

How often do you have to replace starters? My dad had a 4320 now I have it it has needed to have engine overhauled for a long time anything under 45° f have to plug it in to but then barely spins over and starts

@xade7863 2 жыл бұрын

That sounds more like weak battery’s than a starter but also work the steering wheel back an fourth while cranking and see If it helps. What will happen is the front pump will get pressure and it’ll be hard for the starter to turn the engine.

@toddgittins5692 2 жыл бұрын

Should of gave it a shot.

@flyinryan1986 2 жыл бұрын

@@xade7863 it turns over good it's done it for many years even new batteries and cables checked all connections

@xade7863 2 жыл бұрын

@@flyinryan1986 still 24v or been converted to 12v? Also check your ground. On my 1755 oliver I had to hook 3 12v 1200 cold cranking amp batterys to get it to spin over enough to start and turns out I could get it to do better off 1 with ground moved to a better spot and cleaned with a grinder.

@mikhailkimbel91 2 жыл бұрын

Looks awesome what was the cost?

@rodneybalog4605 2 жыл бұрын

That IH should start right up your injection pump must need work try a small 2 stroke oil in tank your needle may be stickie

@glennkrosp3710 2 жыл бұрын

A squirt of starting fluid would have saved some of the cranking time!

@robertpayne2717 2 жыл бұрын

Yes, starting fluid will help in starting but, will also destroy an engine! Bent rods, cracked pistons, etc..

@glennkrosp3710 2 жыл бұрын

@@robertpayne2717 I have used starting fluid for over 50 years and never had any issues that you speak of. However only used it in the winter time or early spring. Yes you will get some knocking on start up and sounds terrible. But never had any engine trouble, we ran John Deere equipment from 3010’s 4020’s to 4840’s. I still have a 4430 that I bought new in 1974 runs good and I use it to clip the pasture (15’ batwing) over 7500 hours and the engine has never been touched.

@toddgittins5692 2 жыл бұрын

@@robertpayne2717 factory equipped for starting fulid. Read the manual.

@markusaschick 3 жыл бұрын

I need to buy stock in John Deere Starters.

@cementer7665 3 жыл бұрын

An excellent video! You have the only 4320 that I have seen that does not have the air intake above the hood. I also like that you have not set the pump to blow huge clouds of black smoke. Your video also disproved the argument of how "easy starting in cold weather IH engines are, along with the fact that you did not resort to the method of "cranking the steering wheel" to get the 4320 to fire off.

@RJ1999x Жыл бұрын

Cranking the steering wheel isn't a myth, it throws the poorly designed John Deere hydraulic system out of stroke

@daveminer9217 3 жыл бұрын

Glencoe "soil saver"...chisel plow. A nice tool matched with a great tractor!

@MrHyde-dt1sx 3 жыл бұрын

That starter spin that 4230 around like the knob on an outhouse door

@royandrews5886 3 жыл бұрын

Man, that thing needs a overhaul already. Never heard one crank that long before starting

@TomJD 3 жыл бұрын

I have worked on two different 4320s from the front to the back completely. I know that both are very strong running the one slipped the pto clutch on the dyno at 200 hp stock engine and the fuel turned up some

@scottrayhons2537 3 жыл бұрын

Why don't you scrap that IH? Those tractors always were junk. The way you grind on starters, you must own a battery company.

@richardharris7714 3 жыл бұрын

You should add some some door tires with the 4320 soon

@richardharris7714 3 жыл бұрын

You should add some

@Okiedokie94 3 жыл бұрын

My childhood memories in a 4320, i was 12 when the war begun in my country, we had to abandon our farm, 20 years later i still have the sound of its engine in my mind, i was learning to drive it, but the clutch was too hard for me.

@p71collector 3 жыл бұрын

I have a 4320 with a 2 speed reverse. Too fast, and WAY too fast! I use a Buhler 8ft rear mount snowblower, and I wish it would go a little slower in reverse. But, it does the job.

@jgscs61 3 жыл бұрын

Is 1110 Eaton fuller whit Cummins ntc 290hp Red Formula no jakes brakes

@scottpayne7876 3 жыл бұрын

Nice work

@dcw1540 3 жыл бұрын

Beautiful tractor. Thanks

Ең жақсы KZbin

Пікірлер