I was watching your review of the MMB AI box for the Mazda CX-9, and after seeing your video, I decided to buy the exact same model you reviewed. I tested it in my 2019 Mazda CX-9, and overall, it works well. However, I’ve encountered an issue with audio synchronization when watching KZbin. Specifically, the audio doesn’t seem to sync up with the video-the person on screen is talking, but there’s a slight delay in the audio that comes about a second after their mouth moves. I’ve tried using both my mobile phone and the 5G SIM card in the AI box to ensure that I have a stable connection, but unfortunately, the problem persists regardless of which method I use. Do you have any suggestions on how to fix this issue, or do you know if this is a common problem with this box? Thank you for your help!

I can't change the green light on the computer to another color. I go into the app to change the color of the light and it doesn't work. Can someone help me ? 🙏🏻

i want to buy ford f 150 model 2024 we have tow engine V8 5.0letter and v6 3.5 letter i need your advice pleas iam in saudi

Blew my 2020 2.7 4x4 trans at 50,000 miles, under warranty. New recall issue 2024 ran my truck dirty, cat sorta fried. Update completed and new spark plugs, runs great at nearly 60,000 on a 2020. Exhaust is tricky on these as i dont want it to sound like a honda. Choices.... But i am pretty impressed with the overall toughness of the 2020.

Beautiful country

I currently have a Prius horn in my 2020 F150… need to do this

Sounds like i need to order a new bumper, grill, headlights before I change my horn

how do you like it so far?

Honda? wtf is that😂😂

Where is this? Yankee Boy Basin? It's bugging me that I don't recognize the area. Thx.

Where this trail😮

Bottom a arm bushings

Before bad mouthing a company, you should learn to follow directions.

Ugh, I thought this was something new to me, unfortunately it's not.

Kind of a tractor sound...

Great video, I spent more time gathering up my tools than it took to replace the switch, thank you.

Not your shock or strut bro. Ball joints, 100%. Had the same creak, injected the boots (upper and lower) with grease and it went away. Make sure to turn the wheel to the extremes to work the grease into the joint, over and over. Or replace the ball joints, they're bad in Ford's eyes... probably not actually bad though. Personally, it was either replace them or attempt to lube them. For me, it worked on the first try. Just use a fat 16 gauge needle and synthetic joint grease, easy to get into the syringe if you put the grease in a plastic bag, cut the corner and squeeze it into the back of the syringe. Mine took about 12 ml per joint. Creaks are gone now. If I ever need to replace them, the new ones will have proper zerk fittings.

I bought my replacement part on Amazon for $21.00 and it’s been working fine for over a year ever since replacing it.

Who built that flatbed? Bowen customs? Dirtbox???

Yes it's Hack and it doesn't work like all hacks, your the hack. haha just kidding. thanks for the video.

Clean

Just put a large resonator without restriction

A fucking unit

What mpg do you get?

What was mpg

My Canam bushings made that exact same noise. I replaced them with polyurethane bushings and never had to grease or hear that noise again.

Does it have more themes? I'll ask because I like darker themes at night? or it has dark mode

Way too unfocused and references to sex organs is offensive

How do you know they wernt trapping people

Clean

Nuct

Sounds broken 😂

It takes less than 10 minutes to remove the grille, but good job getting it done without breaking your grille.

Are those pretty much 33s?

It sounds like it doesn't believe in itself.

I’m thinking about this truck and going with 2.7 I have 19 ram with 5.7 keeping it but want f150 next like yours I’ll be putting on miles on it for sure and it will work for me the wife and my dog

Interesting information from you and others on here about 2.7 I don’t know much about them only had v8s in my trucks wife’s suvs have been turbo so I don’t know if I’m going for this engine or 5.0 in maybe my first f150

Yep, 3157K turn signal. The center bulb is a dual filament 3156.

THX

Just purchased a 2021 2.7 in Tucson and drove it back to Denver. Got 21.7 mpg on the hwy. very impressed

I just bought a 2019 Ford F-150 XLT Sport 4x4 2.7 EcoBoost, super cab Magma Red Exterior,26k miles,1 owner,oil changed every 2000 miles,Mint Condition,$38.000 plus tax cnd like new, MSRP $59.000 cnd Plus Plus Plus,I paid half price and only 26k miles

Great Video! Thank you 🔥👏💪🫶

Thank you. I have an Expedition 2021 Max limited, I made the change in 30 minutes and it was just easy. The key is to remove the hood latch (I marked its position with a piece of chalk to put in the same position later) and removed the horn through it.

were you able to solve this issue? about to buy a readylift that has the 3.3 lift

Its a poor design

I I also hate the auto start stop, I turn it off every time. It’s unnecessary.

I have a 2021 F150 with the 2.7 Ecoboost. I heard since 2018, Ford did some updates to the 2.7 since 2015-2017. My truck was purchased used, I have had it for 2-1/2 months and have put over 3,000 miles on it so far. And so far it’s been great I haven’t had issues. Ford did an oil change and tire rotation at 40,500 miles, I got it at 37,500 miles. At 43,500 miles or some time in October I’m gonna do the oil change again, however my differential cover gasket need air be replaced which Ford will do under warranty. Other than that it’s a great truck. My truck is a 2021 Ford F150 XLT Sport 4x4.

Sounds like a four cylinder Honda with a fiberglass packed muffler.

First off, dope truck👍 but when you put big ass tires on a truck the stock brakes are gunna have to work harder to stop them from turning lmao. Basic physics lol. Put some bigger brakes on and ur chillin.

I got stuck on a screen and can’t swipe to where I need to