I also have a leo ebike 72 volt 32 amp battery blue colour whats the best way to clean the break disk
@GreenLeoManКүн бұрын
Brake cleaner. U can grab some from any automotive shop or walmart probably has some. Just spray it on and let it dry. Enjoy
@darraghwhalen47212 күн бұрын
Also where’s the link to the program
@darraghwhalen47212 күн бұрын
How would I do this with a MacBook?
@GreenLeoMan2 күн бұрын
No idea. Allergic to apples 😆. But seriously I honestly don't know. Maybe some kind of program that emulates windows? U could just run it through that if something like that exists. Good luck
@AlexArt8084 күн бұрын
will this work on a emmo zone gts?
@GreenLeoMan3 күн бұрын
Yes ofcourse. This will work for any ebike with a lithium battery
@AlexArt8083 күн бұрын
@@GreenLeoMan thanks for clearing that up. Is there a way to make it work with a lead acid battery
@GreenLeoMan3 күн бұрын
No. Not unless u can find a 110-240vac lead acid charger. But I wouldn't recommend it. I think the fast charge might bubble and exhaust lead acid if not catch them on fire if they're older. Just exercise caution if u go that route but I would recommend this only for lithium batteries.
@AlexArt8083 күн бұрын
@@GreenLeoMan alr thanks for the help
@ErinReviews6 күн бұрын
Where do you get the e-bike license plate from? I’m also in Ontario
@GreenLeoMan6 күн бұрын
I ordered it from etsy. It's a novelty plate.
@alr29898 күн бұрын
69 mph.... nice
@legitstudio92149 күн бұрын
How much speed do you get
@GreenLeoMan9 күн бұрын
I've gotten her up to 115kph but I ran outta road lol. It still had more to give so I'm not quite sure how fast it goes yet.
@saculatorgaming9 күн бұрын
Hey man i live in niagara falls. And im hoping to upgrade my emmo zone max 84v to a super charger. Any chance you could reach out and we can discuss some things? The charger you use is no longer showing on ali
@GreenLeoMan9 күн бұрын
Here's the perfect charger for u. a.aliexpress.com/_mKHLzuY
@GreenLeoMan9 күн бұрын
Also here's the link for the level 2 charge port. Just scroll down on the main page and u need the "j1772 to (pev)" adapter. That's the one u need. Heres the link. www.tucsonev.com/
@saculatorgaming9 күн бұрын
You're a legend appreciate it! If you're ever down for a ride lmk. I seen your ride from welland on hwy 20 vid. Got a few guys I ride with as well. All emmo zones
@GreenLeoMan9 күн бұрын
How fast u goys go? Cause I like to rip. I might consider it but I hate waiting up for people. I'm mostly a solo guy but I'll give it some consideration.
@saculatorgaming9 күн бұрын
@GreenLeoMan we like doing the chippewa to notl parkway rides. If it's during the day we go as fast as well can (93kmh) top speed
@alr298910 күн бұрын
where can i get the plug for the bike/laptop? thanks so much for your time
@GreenLeoMan10 күн бұрын
Here's 1. a.aliexpress.com/_mNH01oo
@alr29899 күн бұрын
@@GreenLeoMan okay the wires look different colours will i have to take them out and put them in the right tabs like you demonstrated in the video? thanks so much
@GreenLeoMan9 күн бұрын
@alr2989 yea probably. It won't hurt it either way cause ur just switching the data lines, not the power lines. If it doesn't work 1 way, switch the 2 wires and try again.
@alr2989Күн бұрын
@@GreenLeoMan if i copy the exact same settings as you on my tao leo will the switch still work to make it slow/fast?
@GreenLeoManКүн бұрын
@alr2989 no. Mine is setup for sport mode only. And I'm using the connection for reverse, I just set that 1 to be my sport mode. All the other settings will work. Just not the last page of connections. Sry, mines rigged different.
@p4pxsk5811 күн бұрын
You just helped so much with that pedal jack thank you man!!
@alr298912 күн бұрын
do you think you could program votol em 100 controller for me on my tao leo I can come to you
@GreenLeoMan12 күн бұрын
U gotta get ur own cable and program it urself bud. That's what my videos are for. I don't do meetups and I don't release my address either. Just follow the instructions in my video and you will get it. It's not hard. Good luck.
@IAmDox13 күн бұрын
Looking sharp my guy!
@Calvinmaurice13 күн бұрын
Where do i find software to program primator
@GreenLeoMan13 күн бұрын
What's a primator?
@Calvinmaurice13 күн бұрын
Mids spelled software to program
@GreenLeoMan12 күн бұрын
What controller? Be more specific. What bike?
@Calvinmaurice11 күн бұрын
Em 100 votol leo tao
@GreenLeoMan11 күн бұрын
The link is in the description of this exact video. I do believe I said that in the video too. Enjoy.
@finidorisamuel309814 күн бұрын
isthat a actually ontario plate or its custom. So you have your m2 license
@GreenLeoMan14 күн бұрын
It's a custom novelty plate from etsy. I have an m2 but no, it's not a real plate
@finidorisamuel309814 күн бұрын
@@GreenLeoMan that why yoir driving fast. I was just wondwring. My bad now i kno.
@albertdelbosco968615 күн бұрын
Looks great buy a shed to keep it in
@GreenLeoMan15 күн бұрын
Agreed! 😆
@g-budgaming592315 күн бұрын
Dropped ya a like for all the work you’ve done, got any recommendations on a relatively cheap but well built lithium battery pack? 72v 30-50ah, I just dropped in the newest FarDriver controller for the zone s (zone 2.0 controller on ride the wind Ebikes website is the one) my bike hits 90-100 with the lead acid pack but I want some more range and hopefully more speed ahah
@GreenLeoMan14 күн бұрын
Cheterdoli or small-den are 2 decently built cheaper batteries. Check aliexpress, they have these brands.
@g-budgaming592314 күн бұрын
@@GreenLeoManthank man!
@user-ih6nh8ey3t15 күн бұрын
Glad to see you back like the work that you did on your bike. Can’t wait to see more content. I’m still working on mine. Hope to show you a picture of what I have done.
@Spafte15 күн бұрын
Can't wait to see you on the streets
@user-yx5od7bo4u17 күн бұрын
hi.. can a bad mosfet measures ok in diode mode ? but be bad? because have shutoff power while on load... currents phase 5a or less and motor stops.... after 3 months of use with identical params....... i suspect bad mosfets but they seem perfect and all rest.... maybe res sense .. what to check?
@GreenLeoMan17 күн бұрын
Check ur caps, then look for black on resistors and diodes. If all looks well then it probably is ur fets. And yes a fet could potentially measure bad in diode mode. Best way to test fets is to separate them from the board and test them under load. Personally I'd just get a new controller and avoid the headache. I've replaced mosfet just to have the rest blow. Then when they were all replaced I blew 2 caps and a resistor. But if that's the only route for u, good luck my friend. Hope u get it figured out.
@AustraliaWorldwide20 күн бұрын
Does not work I still getting auto save
@GreenLeoMan18 күн бұрын
Not sure y. Seems to work everywhere else. Try changing the numbers to 1 and back to 0 and save in between. C if something sticks. Other than that I've never had an issue. Even with the newest update to ats.
@Spafte20 күн бұрын
Ran into you tonight wish I didn't have to go and charge. Hopefully we meet again!
@GreenLeoMan20 күн бұрын
Yes u did lol. Nice meeting u. Have a great 1. Tnx for the sub!! 👍✌
@lambo677024 күн бұрын
Hey man. Awesome vids. You've helped me so much over time! Can I ask a question. I need to change my front tire. What's the procedure for removing the front bolts? Are the threads regular or reversed? Thanks a million
@GreenLeoMan24 күн бұрын
Righty tighty, lefty loosy my friend. Tnx for watching 😁👍✌
@GreenLeoMan24 күн бұрын
Just remember which spacer belongs to which side and ur fine.
@joeknight197624 күн бұрын
I need replacement controller for my taol.Leo electric motorcycle , it's a 72v 40amp bike. Can you suggest a good replacement controller, I'm looking for something that will allow me to obtain maximum speed that I can also programmable myself. Please help . My bike has been out of commission for almost a year and i'm dying to get back on it
@GreenLeoMan24 күн бұрын
Buy a votol em-100 controller, buy the cable and watch my programming video. U can get them on aliexpress, amazon, etc.
@joeknight197624 күн бұрын
@@GreenLeoMan thank you
@meep355127 күн бұрын
how fast where u rolling throughout the video?
@GreenLeoMan26 күн бұрын
It was 2 years ago, I honestly don't remember 🙃
@AlexArt808Ай бұрын
Do you know if this would work with an EMMO Zone GTS?
@GreenLeoManАй бұрын
Emmo zones claim to have a programmable controller but u need a 60 dollar adapter and different software altogether. Programming a zone is possible, but not like this. This is for the votol controller bikes. U don't have a Votol in ur zone so this trick will not work for you.
@AlexArt80829 күн бұрын
@@GreenLeoMan thanks man
@josearaujo1879Ай бұрын
If i buy a new controller how can i program to my bike votol 150amps
@GreenLeoManАй бұрын
U guys really gotta tell me what bike. Every bike is different. If it's a tao leo, just about the same as the em-100 with more amps lol. Same cable and software. Watch my votol controller programming video, it'll explain more.
@normwatson6558Ай бұрын
So what do you think of those mirrors I'm looking for a new set for mine because I have wide shoulders and I can't see
@GreenLeoManАй бұрын
They're low. So u look through ur armpits at ur sides. Shoulders won't get in the way but if u got a wide middle u won't be able to see shit. Still better than the stock 1's though.
@albertmeloche1756Ай бұрын
What is the name of that metallic green paint? I need to paint my side flaring too?
@GreenLeoManАй бұрын
Not a clue. That's the color it came with. I've picked a new color sceme for the new fairings but u'll have to wait and see what I picked in the next couple videos.
@g-budgaming5923Ай бұрын
Hey man love the channel I have an emmo zone gts but I want to upgrade the speaker system, do you know the name of the plug type that’s used? Can’t find anything online on forums and their website 😭
@GreenLeoManАй бұрын
Sry no, not yet atleast. Havent dug that far into my zone yet and my leo never had any. My sound system in the emmo is munched anyway so I'm probably going to be upgrading it with an aftermarket option. I'll make sure to make a video of it when I do. Sry I can't be more help.
@GreenLeoManАй бұрын
U can always just cut the wires and connectors off ur old speakers and solder them to the new ones 😉
@g-budgaming5923Ай бұрын
@@GreenLeoManLmaoo I was hoping for a more plug and play option 😂 I’ll keep checking Amazon and link if I find a decent one 👌
@TheBluestar101Ай бұрын
Hi Greenleoman , I have a Tao Leo like your and i change the side mirrors on amazon that was for a ninja 300 and it fit in perfectly 2014 -2017
@GreenLeoManАй бұрын
Yea so do mine cause they have slots not just round holes. Makes em kinda universal
@TheBluestar101Ай бұрын
@@GreenLeoMan alright oh i forgot mention that my tao leo is a 2022 model ,maybe since your is a 2020 model that y the fairings hole doesn't fit ,hey am just guessing here am no expect . i brought my new side mirrors that was for ninja 300 model year 2014 to 2017 from amazon and it fit no need for grilling holds . well hoping to see what your new tao leo will look like when it is done look forward in see it.
@GreenLeoManАй бұрын
@TheBluestar101 i had no problem with my mirrors. They fit and were also for a ninja 300. What I'm talking about in my videos is the windshield and the fairing holes dont match up. The mirrors have slots so they adapt to the smaller width. The honda cbr mirrors i ordered for my buddies daymak are identical to the ninja 300 ones in every way. Amazon will advertise They're stuff for many different bikes but it's all the same mirror in the end. Happy modding!
@AussieBodybuilderАй бұрын
Welland is a chithole
@GreenLeoManАй бұрын
Yea but it's a good destination to put some km's down lol.
@AussieBodybuilderАй бұрын
@@GreenLeoMan lol
@JuniorDean-rv8bcАй бұрын
I had almost the same problem without no power on the throotle
@micheltremblay4774Ай бұрын
The Green Leo looks very nice in its green suit. Thanks for the update and take care.
@randomthings601Ай бұрын
I need new wiring harness. Can anybody provide a link for complete wire
@GreenLeoManАй бұрын
Contact ridethewindebikes.ca they might have 1 assuming you have a tao leo or emmo zone. Otherwise no idea but u gotta tell us what kinda bike it is.
@randomthings601Ай бұрын
@@GreenLeoMan Tao Leo
@randomthings601Ай бұрын
Em 100
@GreenLeoManАй бұрын
Nice yea Ride the wind ebikes. Try them.
@oneluvfilmsАй бұрын
Love the work you did. Can you tell me where to get some good brake pads from?
@GreenLeoManАй бұрын
@oneluvfilms Here ya go a.aliexpress.com/_mKLLSyo
@lambo6770Ай бұрын
Did you replace the grips with the silver ones? I've been looking to replace my grips but I'm not sure what size I need
@GreenLeoManАй бұрын
No I'm still using stock but I ordered a very special throttle to test out. If it works well it will accept motorcycle grips. I'll make a video of it when it comes in. Looks very promising😁
@GreenLeoManАй бұрын
22 mm but if the throttle I'm testing works I'll have to order a set of 22/24mm grips. But the stock throttle and grip are both 22mm. ✌
@racko6ixАй бұрын
Apparently the higher the HDC value, the faster you will go also. The value is rpm's. Your entry is what it caps at. I have mine turned off.
@mohamadabu5141Ай бұрын
Is it for real?
@GreenLeoManАй бұрын
If u have a 2020 tao leo and a legit votol em-100, absolutely!
@chrisdeault74432 ай бұрын
is your bike registered?
@GreenLeoMan2 ай бұрын
Nope. No need.
@casperdong2 ай бұрын
Have a 2021 Tao leo, and one of the screws which holds my brake sensor keeps coming loose and making me cut power too my throttle. Any thoughts on where I can get a replacement screw as this one looks rusted out, or solving my brake issue?
@GreenLeoMan2 ай бұрын
Home hardware has a large selection of bolts and screws. Screws r pretty universal. Find 1 that fits tight and ur good. Home depot?
@casperdong2 ай бұрын
thanks will try it
@casperdong2 ай бұрын
@@GreenLeoMan issue now is that every time i go above 82kmph, it kills the throttle and i go to a complete stop and then I get my throttle back. thoughts on the issue?
@@GreenLeoMan just wanted to pick your brain, maybe ride. That's all.
@testadormotoeletrica80212 ай бұрын
Votol em50 is for 2000w motor and above ONLY! There are many fake "3000w" motor on the market
@GreenLeoMan2 ай бұрын
The tao leo comes with a 3000w QSMOTOR. Definitely not fake. And the em50sp exceeds 3000w. But yes, these controllers are not for regular 500w motors. You'll smoke em quick doing that lol. Good advice and tnx for watching!
@testadormotoeletrica80212 ай бұрын
@@GreenLeoMan No bro, em50 can reach 4320w peak but this doesnt mean it matches with a real 3000w motor. It phase current is not enought to break motors internal resistance, it would have almost no torque. Your motor can be written 3000w on it, but if it comes with em50, its not 3000w. Look if phase wires are thin.
@testadormotoeletrica80212 ай бұрын
@@GreenLeoMan There are some of these white label bikes in my country. Real 3000w motor has thick phase wire, they can stand up to 100A current with no cooling. Minimum for real 3000w motor is em100, but em150 runs much better. Those white label bikes usually comes with cheap controllers for motors up to 2000w motors, probably the case of new ones with em50
@GreenLeoMan2 ай бұрын
Sounds about right. No idea. Mine came with an em100 stock. Not sure what "white label bikes" are. My setup is 100a as well. Yes thick wires. I do know a thing or 2 about these bikes. This particular one is all brand name genuine stuff. Also running a daly 120a bms to make sure my 40ah battery is pushin the right power. I'm an electronic technologist by trade so i do understand what you mean. That's y i went with the 2020 tao leo. I did alot of research before i bought the bike just to make sure they didn't cheap out on the power train. But yes. Don't buy knockoff stuff. So what if it's cheaper, u get what u pay for and it'll end up costing more in the long run. 👍✌
@testadormotoeletrica80212 ай бұрын
@@GreenLeoMan White label I mean is when one company buys its product from another company and rebrands it as their own. Its the case of most chinese ebike. About the BMS, you did it right, in my experience, a bms at least 20A higher than what you are going to draw from the battery makes huge difference on mosfet temperature. My JK bms 60A rates goes 52ºc if my bike is set to 60A peak. But it reaches ~34ºc if 80A bms is used with the same 60A peak
@TriniHotShot2 ай бұрын
hey man, I was also thinking of buying a parts bike out in Caldeon. Dropped mine and ever since it's giving me a fault code 00020080 and doesn't want to move. What resources do you use for figuring this stuff out?
@GreenLeoMan2 ай бұрын
What bike and controller do u have?
@GreenLeoMan2 ай бұрын
If u dropped it hard i would start with checking all the connections, make sure they're still plugged in tight. Check the breaker. Check wires for breaks and grounding. There's so many variables. So little information on controllers too. It's really just a big hit n miss game.
@TriniHotShot2 ай бұрын
@@GreenLeoMan A Tao Leo/Vipermax Pro like yours. Controller is a Votol EM-150SP
@TriniHotShot2 ай бұрын
@@GreenLeoMan For sure man, appreciate the response! Yeah, information is sparse on these. Figured I'd ask since your videos helped before and we have a similar setup. Thanks again for the response and always looking forward to more videos!
@GreenLeoMan2 ай бұрын
I just looked through the votol fault codes. Nothing specific to your code but 80 usually means hall sensors. Check the 5 wire plug. Make sure it's plugged into the adapter peice and make sure that's plugged into the controller. Make sure they are tight and no wires pulled out or broke off. Hopefully u get lucky. Worst case scenario u fried ur hall sensors and that means new motor time. But I hope it's just a loose connection somewhere. Good luck.
@brunobonfim9442 ай бұрын
Hey man! I have a Tao Leo that got burnt by a fire and I was wondering if you can give me a hand with it? I was in orlando when it happened so im not sure if the fireman unclipped any wiring or anything of that sort.
@GreenLeoMan2 ай бұрын
Not sure how I'm supposed to do that. Sounds like it got charred and fireman, so there was lots of water too. Dude I hate to say it but it sounds like ur whole bike is f'd. Probably needs a new wiring harness, controller, inverter, lights, dash, god the list goes on. Sry bud but I make videos to help people, other than that, I don't actually work on bikes other than my own and maybe my closest friends. But I do share what I've learned in video so I hope they can be of use but it sounds like you have a monumental job ahead of u. Good luck 👍 ✌
@jimmyhallatt2 ай бұрын
So, does it still auto save ? Or do i now have to save it everytime i quit and am done playing ?
@jimmyhallatt2 ай бұрын
UPDATE > No you don't. When you quit the game, it will still save.
@GreenLeoMan2 ай бұрын
Was just about to say that lol. Good call.
@jimmyhallatt2 ай бұрын
@GreenLeoMan massive help! Thank you dude! The gaming experience is smooth as silk now! Amazing 👏🏻
@GreenLeoMan2 ай бұрын
@jimmyhallatt good 2 hear. Tnx for watchin and keep truckin 👍✌
@ezequiel_chaop2 ай бұрын
bro you can got more speed with Votol em 100
@tjmcdowell-ij1sm2 ай бұрын
What bms is in the tao leo im being told i only have a 100amp bms in my leo
@GreenLeoMan2 ай бұрын
Yea actually the original 2020 tao leo only had an 80amp p.o.s. not sure about the 2022 models. But yea 100amp sounds bout right. But i put the daly in and it's bluetooth controlled up to 120amp. With the daly bms u can set all the low and high voltage, amp, etc settings to get the most out of your battery. Including an on screen monitor of all the battery rows. Incase there's a problem, it'll let ya know. I definitely recommend the upgrade if u know what ur doing. This modification is not for the inexperienced. U could explode the whole pack if not done correctly. But if u know ur way around high amp then a daly bms is a must. So yea u probly do have a 100amp bms low buget, made in china jobby. Hope that helped and as always, tnx for watching 👍✌
@sparshpatel42832 ай бұрын
what modifications did you do in order to get the bike to go at these speeds?
@GreenLeoMan2 ай бұрын
120a Daly bms. 6 gauge wire for the main power from the battery to the controller. And programmed the controller. That's it!
@user-ih6nh8ey3t2 ай бұрын
Love the work you’re doing hope to see more work done. I also bought me an extra bike. My folks on bent need to buy new forks.😊
@user-ih6nh8ey3t2 ай бұрын
How are you doing Green Leo man. Whatever you do when you buy a framing kit do not buy motorcycle fairing kit because the hose won’t line up my mistake. I bought a kid and it did not lineup now. I have to do some work on it so it can fit on my bike. I bought the ninja 300 furring kit original ninja fairing and it did not line up or match, paid lots of money for it not gonna get it. I’m gonna do everything possible so I could get it on my bike. Just letting you know be careful bye sharing kit that pertains to the bike.
@GreenLeoMan2 ай бұрын
Good to know.
@user-ih6nh8ey3t2 ай бұрын
Sorry about that email I sent you didn’t come out complete what I was trying to say do not buy fairing for my actually motorcycle kit like the ninja 300 fairings they would not fit on the eBay too much custom work if you willing to do that I have a hard time putting real motorcycle fairing on my bikelotta work
@GreenLeoMan2 ай бұрын
@@user-ih6nh8ey3twhat ebike do u have? And do u have a link to the fairing u bought so I know what not to get?
@frankz11252 ай бұрын
Looks good. I need time to get mine running. I never trusted Aliexpress. You dont have any issues with them? Cheers
@GreenLeoMan2 ай бұрын
No. I mean once in a while i dont get my order, but I've always been fully refunded. And all the ebike stuff is good. Just read the fine print. Make sure what ur ordering is actually what u think ur gonna get lol. I've had great success with them and either way it's alot cheaper than amazon or something. Good luck my friend and Tnx 4 watchin 😁